[PATCH 0/3] ARM: dts: use the SDHC MMC controller for eMMC

[patchwork-bot+linux-amlogic at kernel.org]

Hello:

This series was applied to khilman/linux-amlogic.git (refs/heads/for-next).

On Sat, 20 Jun 2020 18:36:51 +0200 you wrote:
> Amlogic Meson6/8/8b/8m2 SoCs have two built-in MMC controllers:
> - SDIO (which is supported on mainline for a long time now but is
>   limited to ~40MHz bus frequency)
> - SDHC (which supports up to HS-200 modes at ~100MHz bus frequency but
>   for which we didn't have a driver)
> 
> Boards with NAND flash will now be able to use the SDIO controller for
> SDIO based wifi cards and the SDHC controller for the SD card slot.
> Boards with eMMC, SD card and SDIO wifi can only use two out of three
> MMC based devices for now until the MMC core and Meson SDIO driver gain
> support for multiple "mmc-slots" per controller.
> 
> [...]


Here is a summary with links:
  - [1/3] ARM: dts: meson: add the SDHC MMC controller
    https://git.kernel.org/khilman/linux-amlogic/c/73106f75bf9498ff5d50f1052ad3cf03730d806d
  - [2/3] ARM: dts: meson8b: ec100: enable the SDHC controller
    https://git.kernel.org/khilman/linux-amlogic/c/73501b890a6f15460613878b463319d0e0cd1632
  - [3/3] ARM: dts: meson8b: odroidc1: enable the SDHC controller
    https://git.kernel.org/khilman/linux-amlogic/c/d6a3873c7be6d58914ea5584dc7875f2045d6721

You are awesome, thank you!

-- 
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/pwbot