[PATCH 0/3] ARM: dts: use the SDHC MMC controller for eMMC
Kevin Hilman
khilman at baylibre.com
Mon Jul 13 15:03:29 EDT 2020
On Sat, 20 Jun 2020 18:36:51 +0200, Martin Blumenstingl wrote:
> Amlogic Meson6/8/8b/8m2 SoCs have two built-in MMC controllers:
> - SDIO (which is supported on mainline for a long time now but is
> limited to ~40MHz bus frequency)
> - SDHC (which supports up to HS-200 modes at ~100MHz bus frequency but
> for which we didn't have a driver)
>
> Boards with NAND flash will now be able to use the SDIO controller for
> SDIO based wifi cards and the SDHC controller for the SD card slot.
> Boards with eMMC, SD card and SDIO wifi can only use two out of three
> MMC based devices for now until the MMC core and Meson SDIO driver gain
> support for multiple "mmc-slots" per controller.
>
> [...]
Applied, thanks!
[1/3] ARM: dts: meson: add the SDHC MMC controller
commit: 73106f75bf9498ff5d50f1052ad3cf03730d806d
[2/3] ARM: dts: meson8b: ec100: enable the SDHC controller
commit: 73501b890a6f15460613878b463319d0e0cd1632
[3/3] ARM: dts: meson8b: odroidc1: enable the SDHC controller
commit: d6a3873c7be6d58914ea5584dc7875f2045d6721
Best regards,
--
Kevin Hilman <khilman at baylibre.com>
More information about the linux-amlogic
mailing list