[PATCH] clk: meson: add axg misc bit to the mpll driver
Jerome Brunet
jbrunet at baylibre.com
Fri Jan 19 07:42:36 PST 2018
On axg, the rate of the mpll is stuck as if sdm value was 4 and could not
change (expect for mpll2 strangely). Looking at the vendor kernel, it
turns out a new magic bit from the undocumented HHI_PLL_TOP_MISC register
is required.
Setting this bit solves the problem and the mpll rates are back to normal
Fixes: 78b4af312f91 ("clk: meson-axg: add clock controller drivers")
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/clk/meson/axg.c | 20 ++++++++++++++++++++
drivers/clk/meson/clk-mpll.c | 7 +++++++
drivers/clk/meson/clkc.h | 1 +
3 files changed, 28 insertions(+)
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index 953e119635a2..2f2b3845c01d 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -292,6 +292,11 @@ static struct meson_clk_mpll axg_mpll0 = {
.shift = 25,
.width = 1,
},
+ .misc = {
+ .reg_off = HHI_PLL_TOP_MISC,
+ .shift = 0,
+ .width = 1,
+ },
.lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
@@ -322,6 +327,11 @@ static struct meson_clk_mpll axg_mpll1 = {
.shift = 14,
.width = 1,
},
+ .misc = {
+ .reg_off = HHI_PLL_TOP_MISC,
+ .shift = 1,
+ .width = 1,
+ },
.lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
@@ -352,6 +362,11 @@ static struct meson_clk_mpll axg_mpll2 = {
.shift = 14,
.width = 1,
},
+ .misc = {
+ .reg_off = HHI_PLL_TOP_MISC,
+ .shift = 2,
+ .width = 1,
+ },
.lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",
@@ -382,6 +397,11 @@ static struct meson_clk_mpll axg_mpll3 = {
.shift = 0,
.width = 1,
},
+ .misc = {
+ .reg_off = HHI_PLL_TOP_MISC,
+ .shift = 3,
+ .width = 1,
+ },
.lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll3",
diff --git a/drivers/clk/meson/clk-mpll.c b/drivers/clk/meson/clk-mpll.c
index 5144360e2c80..6d79d6daadc4 100644
--- a/drivers/clk/meson/clk-mpll.c
+++ b/drivers/clk/meson/clk-mpll.c
@@ -173,6 +173,13 @@ static int mpll_set_rate(struct clk_hw *hw,
reg = PARM_SET(p->width, p->shift, reg, n2);
writel(reg, mpll->base + p->reg_off);
+ p = &mpll->misc;
+ if (p->width != 0) {
+ reg = readl(mpll->base + p->reg_off);
+ reg = PARM_SET(p->width, p->shift, reg, 1);
+ writel(reg, mpll->base + p->reg_off);
+ }
+
if (mpll->lock)
spin_unlock_irqrestore(mpll->lock, flags);
else
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 4acb35bda669..07aaba26a857 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -121,6 +121,7 @@ struct meson_clk_mpll {
struct parm n2;
struct parm en;
struct parm ssen;
+ struct parm misc;
spinlock_t *lock;
};
--
2.14.3
More information about the linux-amlogic
mailing list