[PATCH 0/3] Meson8/Meson8b reset improvements

[Kevin Hilman]

Martin Blumenstingl <martin.blumenstingl at googlemail.com> writes:

> Hi Kevin,
>
> On Tue, Dec 26, 2017 at 12:43 PM, Martin Blumenstingl
> <martin.blumenstingl at googlemail.com> wrote:
>> Recently Neil landed reset level support (.assert/.deassert) for the
>> reset-meson driver.
>> While the driver does not support level resets on Meson8b yet we can
>> already prepare the .dts to do so (I actually found out that level
>> resets are implemented identical on Meson8/Meson8b/GX - a patch for
>> the reset-meson driver will follow in a separate series).
> even though there's no hard dependency on that:
> the patch which enables level resets for Meson8b (see [0]) is now
> queued for v4.16
>
>> I also noticed that Meson8 does not have the reset controller in it's
>> .dtsi yet, so this series adds that as well.
>> It also adds the USB reset lines on Meson8 afterwards to stay
>> consistent with Meson8b.
> will you take this series for v4.16 or should I re-send it (with
> Neil's "Reviewed-by") after v4.16-rc1 is out?

Please resend with tags.

Thanks,

Kevin