[PATCH 0/3] Meson8/Meson8b reset improvements

Martin Blumenstingl martin.blumenstingl at googlemail.com
Sun Jan 7 12:11:53 PST 2018

Hi Kevin,

On Tue, Dec 26, 2017 at 12:43 PM, Martin Blumenstingl
<martin.blumenstingl at googlemail.com> wrote:
> Recently Neil landed reset level support (.assert/.deassert) for the
> reset-meson driver.
> While the driver does not support level resets on Meson8b yet we can
> already prepare the .dts to do so (I actually found out that level
> resets are implemented identical on Meson8/Meson8b/GX - a patch for
> the reset-meson driver will follow in a separate series).
even though there's no hard dependency on that:
the patch which enables level resets for Meson8b (see [0]) is now
queued for v4.16

> I also noticed that Meson8 does not have the reset controller in it's
> .dtsi yet, so this series adds that as well.
> It also adds the USB reset lines on Meson8 afterwards to stay
> consistent with Meson8b.
will you take this series for v4.16 or should I re-send it (with
Neil's "Reviewed-by") after v4.16-rc1 is out?

> Martin Blumenstingl (3):
>   ARM: dts: meson8b: grow the reset controller memory zone
>   ARM: dts: meson8: add the reset controller
>   ARM: dts: meson8: add the USB reset line
>  arch/arm/boot/dts/meson8.dtsi  | 9 +++++++++
>  arch/arm/boot/dts/meson8b.dtsi | 2 +-
>  2 files changed, 10 insertions(+), 1 deletion(-)
> --
> 2.15.1


[0] http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005869.html

More information about the linux-amlogic mailing list