[PATCH v2 14/18] arm64: dts: meson-gxbb-p20x: Fix node order

[Neil Armstrong]

On 05/13/2017 04:33 PM, Andreas Färber wrote:
> Sort nodes referenced by label alphabetically.
> 
> Signed-off-by: Andreas Färber <afaerber at suse.de>
> ---
>  v1 -> v2:
>  * Rebased (new nodes added)
>  
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 62 ++++++++++++------------
>  1 file changed, 31 insertions(+), 31 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> index 0ec1d19522dd..d904deb1018c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> @@ -148,34 +148,36 @@
>  	};
>  };
>  
> -/* This UART is brought out to the DB9 connector */
> -&uart_AO {
> -	status = "okay";
> -	pinctrl-0 = <&uart_ao_a_pins>;
> -	pinctrl-names = "default";
> +&cvbs_vdac_port {
> +	cvbs_vdac_out: endpoint {
> +		remote-endpoint = <&cvbs_connector_in>;
> +	};
>  };
>  
> -&ir {
> +&hdmi_tx {
>  	status = "okay";
> -	pinctrl-0 = <&remote_input_ao_pins>;
> +	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
>  	pinctrl-names = "default";
>  };
>  
> -&usb0_phy {
> -	status = "okay";
> -	phy-supply = <&usb_pwr>;
> -};
> -
> -&usb1_phy {
> -	status = "okay";
> +&hdmi_tx_tmds_port {
> +	hdmi_tx_tmds_out: endpoint {
> +		remote-endpoint = <&hdmi_connector_in>;
> +	};
>  };
>  
> -&usb0 {
> +&ir {
>  	status = "okay";
> +	pinctrl-0 = <&remote_input_ao_pins>;
> +	pinctrl-names = "default";
>  };
>  
> -&usb1 {
> +&pwm_ef {
>  	status = "okay";
> +	pinctrl-0 = <&pwm_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&clkc CLKID_FCLK_DIV4>;
> +	clock-names = "clkin0";
>  };
>  
>  /* Wireless SDIO Module */
> @@ -242,28 +244,26 @@
>  	vqmmc-supply = <&vddio_boot>;
>  };
>  
> -&pwm_ef {
> +/* This UART is brought out to the DB9 connector */
> +&uart_AO {
>  	status = "okay";
> -	pinctrl-0 = <&pwm_e_pins>;
> +	pinctrl-0 = <&uart_ao_a_pins>;
>  	pinctrl-names = "default";
> -	clocks = <&clkc CLKID_FCLK_DIV4>;
> -	clock-names = "clkin0";
>  };
>  
> -&cvbs_vdac_port {
> -	cvbs_vdac_out: endpoint {
> -		remote-endpoint = <&cvbs_connector_in>;
> -	};
> +&usb0_phy {
> +	status = "okay";
> +	phy-supply = <&usb_pwr>;
>  };
>  
> -&hdmi_tx {
> +&usb1_phy {
>  	status = "okay";
> -	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> -	pinctrl-names = "default";
>  };
>  
> -&hdmi_tx_tmds_port {
> -	hdmi_tx_tmds_out: endpoint {
> -		remote-endpoint = <&hdmi_connector_in>;
> -	};
> +&usb0 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	status = "okay";
>  };
> 

Hi Andreas,

Like a previous attempt, I'm not OK with such rework since it will break bisect and add complexity for new patches handling.

The order is not alphabetically ordered, live with it.

Neil