[PATCH v2 14/18] arm64: dts: meson-gxbb-p20x: Fix node order
Andreas Färber
afaerber at suse.de
Sat May 13 07:33:33 PDT 2017
Sort nodes referenced by label alphabetically.
Signed-off-by: Andreas Färber <afaerber at suse.de>
---
v1 -> v2:
* Rebased (new nodes added)
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 62 ++++++++++++------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 0ec1d19522dd..d904deb1018c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -148,34 +148,36 @@
};
};
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
};
-&ir {
+&hdmi_tx {
status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
-&usb0_phy {
- status = "okay";
- phy-supply = <&usb_pwr>;
-};
-
-&usb1_phy {
- status = "okay";
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
};
-&usb0 {
+&ir {
status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
};
-&usb1 {
+&pwm_ef {
status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
};
/* Wireless SDIO Module */
@@ -242,28 +244,26 @@
vqmmc-supply = <&vddio_boot>;
};
-&pwm_ef {
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
};
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_pwr>;
};
-&hdmi_tx {
+&usb1_phy {
status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
};
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
};
--
2.12.0
More information about the linux-amlogic
mailing list