[PATCH v4 6/7] ARM: dts: meson8: add support for booting the secondary CPU cores

Neil Armstrong narmstrong at baylibre.com
Tue Jul 25 01:00:47 PDT 2017



Le 22/07/2017 21:19, Martin Blumenstingl a écrit :
> Booting the secondary CPU cores involves the following nodes/devices:
> - SCU (Snoop-Control-Unit, for which we already have a DT node)
> - a reset line for each CPU core, provided by the reset-controller
>   which is built into the clock-controller
> - the PMU (power management unit) which controls the power of the CPU
>   cores
> - a range in the SRAM specifically reserved for booting secondary CPU
>   cores
> - the "enable-method" which activates booting the secondary CPU cores
> 
> This adds all required nodes and properties to boot the secondary CPU
> cores.
> 
> Suggested-by: Carlo Caione <carlo at caione.org>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  arch/arm/boot/dts/meson8.dtsi | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index b98d44fde6b6..44515733df29 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -60,6 +60,8 @@
>  			compatible = "arm,cortex-a9";
>  			next-level-cache = <&L2>;
>  			reg = <0x200>;
> +			enable-method = "amlogic,meson8-smp";
> +			resets = <&clkc RESETID_CPU0_SOFT_RESET>;
>  		};
>  
>  		cpu at 201 {
> @@ -67,6 +69,8 @@
>  			compatible = "arm,cortex-a9";
>  			next-level-cache = <&L2>;
>  			reg = <0x201>;
> +			enable-method = "amlogic,meson8-smp";
> +			resets = <&clkc RESETID_CPU1_SOFT_RESET>;
>  		};
>  
>  		cpu at 202 {
> @@ -74,6 +78,8 @@
>  			compatible = "arm,cortex-a9";
>  			next-level-cache = <&L2>;
>  			reg = <0x202>;
> +			enable-method = "amlogic,meson8-smp";
> +			resets = <&clkc RESETID_CPU2_SOFT_RESET>;
>  		};
>  
>  		cpu at 203 {
> @@ -81,6 +87,8 @@
>  			compatible = "arm,cortex-a9";
>  			next-level-cache = <&L2>;
>  			reg = <0x203>;
> +			enable-method = "amlogic,meson8-smp";
> +			resets = <&clkc RESETID_CPU3_SOFT_RESET>;
>  		};
>  	};
>  
> @@ -118,6 +126,11 @@
>  }; /* end of / */
>  
>  &aobus {
> +	pmu: pmu at e0 {
> +		compatible = "amlogic,meson8-pmu", "syscon";
> +		reg = <0xe0 0x8>;
> +	};
> +
>  	pinctrl_aobus: pinctrl at 84 {
>  		compatible = "amlogic,meson8-aobus-pinctrl";
>  		reg = <0x84 0xc>;
> @@ -249,6 +262,13 @@
>  	};
>  };
>  
> +&ahb_sram {
> +	smp-sram at 1ff80 {
> +		compatible = "amlogic,meson8-smp-sram";
> +		reg = <0x1ff80 0x8>;
> +	};
> +};
> +
>  &ethmac {
>  	clocks = <&clkc CLKID_ETH>;
>  	clock-names = "stmmaceth";
> 

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>



More information about the linux-amlogic mailing list