[PATCH v4 7/7] ARM: dts: meson8b: add support for booting the secondary CPU cores
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Sat Jul 22 12:19:46 PDT 2017
From: Carlo Caione <carlo at caione.org>
Booting the secondary CPU cores involves the following nodes/devices:
- SCU (Snoop-Control-Unit, for which we already have a DT node)
- a reset line for each CPU core, provided by the reset-controller
which is built into the clock-controller
- the PMU (power management unit) which controls the power of the CPU
cores
- a range in the SRAM specifically reserved for booting secondary CPU
cores
- the "enable-method" which activates booting the secondary CPU cores
This adds all required nodes and properties to boot the secondary CPU
cores.
Signed-off-by: Carlo Caione <carlo at caione.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
arch/arm/boot/dts/meson8b.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index bc278da7df0d..c9e74d2fcbdf 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -59,6 +59,8 @@
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
reg = <0x200>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc RESETID_CPU0_SOFT_RESET>;
};
cpu at 201 {
@@ -66,6 +68,8 @@
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
reg = <0x201>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc RESETID_CPU1_SOFT_RESET>;
};
cpu at 202 {
@@ -73,6 +77,8 @@
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
reg = <0x202>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc RESETID_CPU2_SOFT_RESET>;
};
cpu at 203 {
@@ -80,6 +86,8 @@
compatible = "arm,cortex-a5";
next-level-cache = <&L2>;
reg = <0x203>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc RESETID_CPU3_SOFT_RESET>;
};
};
@@ -90,6 +98,11 @@
}; /* end of / */
&aobus {
+ pmu: pmu at e0 {
+ compatible = "amlogic,meson8b-pmu", "syscon";
+ reg = <0xe0 0x18>;
+ };
+
pinctrl_aobus: pinctrl at 84 {
compatible = "amlogic,meson8b-aobus-pinctrl";
reg = <0x84 0xc>;
@@ -157,6 +170,13 @@
};
};
+&ahb_sram {
+ smp-sram at 1ff80 {
+ compatible = "amlogic,meson8b-smp-sram";
+ reg = <0x1ff80 0x8>;
+ };
+};
+
ðmac {
clocks = <&clkc CLKID_ETH>;
clock-names = "stmmaceth";
--
2.13.3
More information about the linux-amlogic
mailing list