[PATCH v2 0/3] add the reset controller to the Meson8b clkc
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Sat Jul 22 11:58:04 PDT 2017
This registers the known (soft) reset lines provided by the clock
controller's registers.
This is the first preparation step for SMP and CPU hotplug support on
Meson8/Meson8b/Meson8m2. Booting the secondary cores on these SoCs
requires asserting and de-asserting a reset line (one for each CPU
core). These reset lines are provided by the clock controller.
The reset controller part of the meson8b clock controller has to be
registered early (which I did through CLK_OF_DECLARE_DRIVER), because
the secondary cores are started *very* early in the boot process (and
meson8b_clkc_probe is invoked long after we need the reset controller
to be available for booting the secondary CPU cores).
The user of the reset-controller (= the patches which enable SMP and
CPU hotplug support) will follow in the next days. I decided to split
this because the SMP series will probably consist of 6 patches alone
(and may need to go through two separate trees).
Changes since v1 at [0]:
- updated cover letter description as we are now registering more than
four reset lines
- split patch #1 into a dt-binding and clk driver patch
- slightly reworded the dt-binding documentation so it's now clear that
the reset identifiers are preprocessor macros in
dt-bindings/clock/meson8b-clkc.h (v1 of this series didn't have these
macros at all)
- patch #2 (previously part of patch #1) now registers all known reset
lines (see [1] and [2] for the results of my detective work)
- patch #3 is untouched
[0] http://lists.infradead.org/pipermail/linux-amlogic/2017-July/004283.html
[1] http://lists.infradead.org/pipermail/linux-amlogic/2017-July/004330.html
[2] http://lists.infradead.org/pipermail/linux-amlogic/2017-July/004347.html
Martin Blumenstingl (3):
dt-bindings: clock: meson8b: describe the embedded reset controller
clk: meson: meson8b: register the built-in reset controller
ARM: dts: meson: mark the clock controller also as reset controller
.../bindings/clock/amlogic,meson8b-clkc.txt | 8 +-
arch/arm/boot/dts/meson8.dtsi | 1 +
arch/arm/boot/dts/meson8b.dtsi | 1 +
drivers/clk/meson/Kconfig | 1 +
drivers/clk/meson/meson8b.c | 159 +++++++++++++++++++--
drivers/clk/meson/meson8b.h | 25 +++-
6 files changed, 181 insertions(+), 14 deletions(-)
--
2.13.3
More information about the linux-amlogic
mailing list