[RFT net-next 2/2] net: stmmac: dwmac-meson8b: don't try to change m250_div parent's rate

[Jerome Brunet]

On Sat, 2017-12-23 at 18:04 +0100, Martin Blumenstingl wrote:
> Trying to set the rate of m250_div's parent clock makes no sense since
> it's a mux which has neither CLK_MUX_ROUND_CLOSEST nor
> CLK_SET_RATE_PARENT set.
> It even does harm on Meson8b SoCs where the input clock for the mux
> cannot be divided down to 250MHz evenly (the parent rate is 500002394Hz)

So your problem is more with the mux actually, not the divider. Instead of
removing CLK_SET_RATE_PARENT from the divider, may I suggest to put

CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT on the parent mux, and keep
CLK_SET_RATE_PARENT (with CLK_DIVIDER_ROUND_CLOSEST)  on the divS.

I suppose it would a accomplish the same thing with one added benefits for
meson8b :

If the bootloader did not set the mpll2 to the correct rate, it will now be done
thanks to rate propagation.

If I missed anything, feel free to point it out.

Cheers 

> which is why we need to use CLK_DIVIDER_ROUND_CLOSEST for the m250_div
> clock. The clk-divider driver however ignores the
> CLK_DIVIDER_ROUND_CLOSEST flag if CLK_SET_RATE_PARENT is set (because
> it simply tries to set the best possible clock rate for the parent,
> which does nothing in our case since the parent is a mux which doesn't
> allow rate changes as explained above).
> 
> This fixes setting the RGMII clock on Meson8 SoCs which ended up with a
> ~20MHz clock instead of the expected ~25MHz.
> The dwmac-meson8b driver requests a 25MHz clock rate for the m25_div
> (which only supports "divide by 5" and "divide by 10") clock which is
> derived from the m250_div clock. Due to clk-divider ignoring the
> CLK_DIVIDER_ROUND_CLOSEST flag the resulting m250_div clock was set to
> ~100MHz (divider = 5) and the m25_div clock was set to ~20MHz (divider =
> 5) by the common clock framework (as this value is closest to 25MHz if
> we would not have set CLK_DIVIDER_ROUND_CLOSEST). What we actually need
> however is a rate of ~250MHz on the m250_div clock (divider = 2) and
> ~25MHz on the m25_div clock (divider = 10) - these are also the values
> chosen by the out-of-tree vendor driver.
> With this we end up with a RGMII clock of 25000120Hz (which is as close
> to 25MHz we can get with an input clock of 500002394Hz).
> 
> SoCs from the Meson GX series are not affected by this change because
> the input clock is FCLK_DIV2 whose rate cannot be changed. Additionally
> the GX SoCs don't need to use the "closest" divider since the parent
> clock is a multiple of 250MHz.
> 
> Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> index c71966332387..26f41c117d63 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> @@ -135,7 +135,7 @@ static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
>  	snprintf(clk_name, sizeof(clk_name), "%s#m250_div", dev_name(dev));
>  	init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
>  	init.ops = &clk_divider_ops;
> -	init.flags = CLK_SET_RATE_PARENT;
> +	init.flags = 0;
>  	clk_div_parents[0] = __clk_get_name(dwmac->m250_mux_clk);
>  	init.parent_names = clk_div_parents;
>  	init.num_parents = ARRAY_SIZE(clk_div_parents);