[RFT net-next 2/2] net: stmmac: dwmac-meson8b: don't try to change m250_div parent's rate

[Martin Blumenstingl]

Trying to set the rate of m250_div's parent clock makes no sense since
it's a mux which has neither CLK_MUX_ROUND_CLOSEST nor
CLK_SET_RATE_PARENT set.
It even does harm on Meson8b SoCs where the input clock for the mux
cannot be divided down to 250MHz evenly (the parent rate is 500002394Hz)
which is why we need to use CLK_DIVIDER_ROUND_CLOSEST for the m250_div
clock. The clk-divider driver however ignores the
CLK_DIVIDER_ROUND_CLOSEST flag if CLK_SET_RATE_PARENT is set (because
it simply tries to set the best possible clock rate for the parent,
which does nothing in our case since the parent is a mux which doesn't
allow rate changes as explained above).

This fixes setting the RGMII clock on Meson8 SoCs which ended up with a
~20MHz clock instead of the expected ~25MHz.
The dwmac-meson8b driver requests a 25MHz clock rate for the m25_div
(which only supports "divide by 5" and "divide by 10") clock which is
derived from the m250_div clock. Due to clk-divider ignoring the
CLK_DIVIDER_ROUND_CLOSEST flag the resulting m250_div clock was set to
~100MHz (divider = 5) and the m25_div clock was set to ~20MHz (divider =
5) by the common clock framework (as this value is closest to 25MHz if
we would not have set CLK_DIVIDER_ROUND_CLOSEST). What we actually need
however is a rate of ~250MHz on the m250_div clock (divider = 2) and
~25MHz on the m25_div clock (divider = 10) - these are also the values
chosen by the out-of-tree vendor driver.
With this we end up with a RGMII clock of 25000120Hz (which is as close
to 25MHz we can get with an input clock of 500002394Hz).

SoCs from the Meson GX series are not affected by this change because
the input clock is FCLK_DIV2 whose rate cannot be changed. Additionally
the GX SoCs don't need to use the "closest" divider since the parent
clock is a multiple of 250MHz.

Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index c71966332387..26f41c117d63 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -135,7 +135,7 @@ static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
 	snprintf(clk_name, sizeof(clk_name), "%s#m250_div", dev_name(dev));
 	init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
 	init.ops = &clk_divider_ops;
-	init.flags = CLK_SET_RATE_PARENT;
+	init.flags = 0;
 	clk_div_parents[0] = __clk_get_name(dwmac->m250_mux_clk);
 	init.parent_names = clk_div_parents;
 	init.num_parents = ARRAY_SIZE(clk_div_parents);
-- 
2.15.1