[PATCH v3 2/2] clk: meson: gxbb: Add sd_emmc clk0 clocks
Neil Armstrong
narmstrong at baylibre.com
Tue Aug 1 05:19:38 PDT 2017
On 07/31/2017 01:56 PM, Jerome Brunet wrote:
> Input source 0 of the mmc controllers is not directly xtal, as currently
> described in DT. Each controller is fed by a composite clock (the usual
> mux, divider and gate). The muxes inputs are the xtal (default) and the
> fclk_div clocks. These parents, along with the divider, should be able to
> provide the necessary rates for mmc and nand operation.
>
> The input muxes should also be able to take mpll2, mpll3 and gp0_pll but
> these are precious clocks, needed for other usage. It is better if the
> mmc does not use these them. For this reason, mpll2, mpll3 and gp0_pll is
> not listed among the possible parents.
>
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> ---
> drivers/clk/meson/gxbb.c | 177 +++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 177 insertions(+)
>
> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
> index 8409d86cda24..dd78c5a1ce4b 100644
> --- a/drivers/clk/meson/gxbb.c
> +++ b/drivers/clk/meson/gxbb.c
> @@ -974,6 +974,156 @@ static struct clk_mux gxbb_32k_clk_sel = {
> },
> };
>
> +static const char * const gxbb_sd_emmc_clk0_parent_names[] = {
> + "xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
> +
> + /*
> + * Following these parent clocks, we should also have had mpll2, mpll3
> + * and gp0_pll but these clocks are too precious to be used here. All
> + * the necessary rates for MMC and NAND operation can be acheived using
> + * xtal or fclk_div clocks
> + */
> +};
> +
> +/* SDIO clock */
> +static struct clk_mux gxbb_sd_emmc_a_clk0_sel = {
> + .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
> + .mask = 0x7,
> + .shift = 9,
> + .lock = &clk_lock,
> + .hw.init = &(struct clk_init_data) {
> + .name = "sd_emmc_a_clk0_sel",
> + .ops = &clk_mux_ops,
> + .parent_names = gxbb_sd_emmc_clk0_parent_names,
> + .num_parents = ARRAY_SIZE(gxbb_sd_emmc_clk0_parent_names),
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_divider gxbb_sd_emmc_a_clk0_div = {
> + .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
> + .shift = 0,
> + .width = 7,
> + .lock = &clk_lock,
> + .flags = CLK_DIVIDER_ROUND_CLOSEST,
> + .hw.init = &(struct clk_init_data) {
> + .name = "sd_emmc_a_clk0_div",
> + .ops = &clk_divider_ops,
> + .parent_names = (const char *[]){ "sd_emmc_a_clk0_sel" },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_gate gxbb_sd_emmc_a_clk0 = {
> + .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
> + .bit_idx = 7,
> + .lock = &clk_lock,
> + .hw.init = &(struct clk_init_data){
> + .name = "sd_emmc_a_clk0",
> + .ops = &clk_gate_ops,
> + .parent_names = (const char *[]){ "sd_emmc_a_clk0_div" },
> + .num_parents = 1,
> +
> + /*
> + * FIXME:
> + * We need CLK_IGNORE_UNUSED because mmc DT node point to xtal
> + * instead of this clock. CCF would gate this on boot, killing
> + * the mmc controller. Please remove this flag once DT properly
> + * point to this clock instead of xtal
> + *
> + * Same goes for emmc B and C clocks
> + */
> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> + },
> +};
> +
> +/* SDcard clock */
> +static struct clk_mux gxbb_sd_emmc_b_clk0_sel = {
> + .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
> + .mask = 0x7,
> + .shift = 25,
> + .lock = &clk_lock,
> + .hw.init = &(struct clk_init_data) {
> + .name = "sd_emmc_b_clk0_sel",
> + .ops = &clk_mux_ops,
> + .parent_names = gxbb_sd_emmc_clk0_parent_names,
> + .num_parents = ARRAY_SIZE(gxbb_sd_emmc_clk0_parent_names),
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_divider gxbb_sd_emmc_b_clk0_div = {
> + .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
> + .shift = 16,
> + .width = 7,
> + .lock = &clk_lock,
> + .flags = CLK_DIVIDER_ROUND_CLOSEST,
> + .hw.init = &(struct clk_init_data) {
> + .name = "sd_emmc_b_clk0_div",
> + .ops = &clk_divider_ops,
> + .parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_gate gxbb_sd_emmc_b_clk0 = {
> + .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
> + .bit_idx = 23,
> + .lock = &clk_lock,
> + .hw.init = &(struct clk_init_data){
> + .name = "sd_emmc_b_clk0",
> + .ops = &clk_gate_ops,
> + .parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> + },
> +};
> +
> +/* EMMC/NAND clock */
> +static struct clk_mux gxbb_sd_emmc_c_clk0_sel = {
> + .reg = (void *)HHI_NAND_CLK_CNTL,
> + .mask = 0x7,
> + .shift = 9,
> + .lock = &clk_lock,
> + .hw.init = &(struct clk_init_data) {
> + .name = "sd_emmc_c_clk0_sel",
> + .ops = &clk_mux_ops,
> + .parent_names = gxbb_sd_emmc_clk0_parent_names,
> + .num_parents = ARRAY_SIZE(gxbb_sd_emmc_clk0_parent_names),
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_divider gxbb_sd_emmc_c_clk0_div = {
> + .reg = (void *)HHI_NAND_CLK_CNTL,
> + .shift = 0,
> + .width = 7,
> + .lock = &clk_lock,
> + .flags = CLK_DIVIDER_ROUND_CLOSEST,
> + .hw.init = &(struct clk_init_data) {
> + .name = "sd_emmc_c_clk0_div",
> + .ops = &clk_divider_ops,
> + .parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_gate gxbb_sd_emmc_c_clk0 = {
> + .reg = (void *)HHI_NAND_CLK_CNTL,
> + .bit_idx = 7,
> + .lock = &clk_lock,
> + .hw.init = &(struct clk_init_data){
> + .name = "sd_emmc_c_clk0",
> + .ops = &clk_gate_ops,
> + .parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> + },
> +};
> +
> /* Everything Else (EE) domain gates */
> static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
> static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
> @@ -1183,6 +1333,15 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
> [CLKID_32K_CLK] = &gxbb_32k_clk.hw,
> [CLKID_32K_CLK_SEL] = &gxbb_32k_clk_sel.hw,
> [CLKID_32K_CLK_DIV] = &gxbb_32k_clk_div.hw,
> + [CLKID_SD_EMMC_A_CLK0_SEL] = &gxbb_sd_emmc_a_clk0_sel.hw,
> + [CLKID_SD_EMMC_A_CLK0_DIV] = &gxbb_sd_emmc_a_clk0_div.hw,
> + [CLKID_SD_EMMC_A_CLK0] = &gxbb_sd_emmc_a_clk0.hw,
> + [CLKID_SD_EMMC_B_CLK0_SEL] = &gxbb_sd_emmc_b_clk0_sel.hw,
> + [CLKID_SD_EMMC_B_CLK0_DIV] = &gxbb_sd_emmc_b_clk0_div.hw,
> + [CLKID_SD_EMMC_B_CLK0] = &gxbb_sd_emmc_b_clk0.hw,
> + [CLKID_SD_EMMC_C_CLK0_SEL] = &gxbb_sd_emmc_c_clk0_sel.hw,
> + [CLKID_SD_EMMC_C_CLK0_DIV] = &gxbb_sd_emmc_c_clk0_div.hw,
> + [CLKID_SD_EMMC_C_CLK0] = &gxbb_sd_emmc_c_clk0.hw,
> [NR_CLKS] = NULL,
> },
> .num = NR_CLKS,
> @@ -1306,6 +1465,15 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
> [CLKID_32K_CLK] = &gxbb_32k_clk.hw,
> [CLKID_32K_CLK_SEL] = &gxbb_32k_clk_sel.hw,
> [CLKID_32K_CLK_DIV] = &gxbb_32k_clk_div.hw,
> + [CLKID_SD_EMMC_A_CLK0_SEL] = &gxbb_sd_emmc_a_clk0_sel.hw,
> + [CLKID_SD_EMMC_A_CLK0_DIV] = &gxbb_sd_emmc_a_clk0_div.hw,
> + [CLKID_SD_EMMC_A_CLK0] = &gxbb_sd_emmc_a_clk0.hw,
> + [CLKID_SD_EMMC_B_CLK0_SEL] = &gxbb_sd_emmc_b_clk0_sel.hw,
> + [CLKID_SD_EMMC_B_CLK0_DIV] = &gxbb_sd_emmc_b_clk0_div.hw,
> + [CLKID_SD_EMMC_B_CLK0] = &gxbb_sd_emmc_b_clk0.hw,
> + [CLKID_SD_EMMC_C_CLK0_SEL] = &gxbb_sd_emmc_c_clk0_sel.hw,
> + [CLKID_SD_EMMC_C_CLK0_DIV] = &gxbb_sd_emmc_c_clk0_div.hw,
> + [CLKID_SD_EMMC_C_CLK0] = &gxbb_sd_emmc_c_clk0.hw,
> [NR_CLKS] = NULL,
> },
> .num = NR_CLKS,
> @@ -1422,6 +1590,9 @@ static struct clk_gate *const gxbb_clk_gates[] = {
> &gxbb_cts_amclk,
> &gxbb_cts_mclk_i958,
> &gxbb_32k_clk,
> + &gxbb_sd_emmc_a_clk0,
> + &gxbb_sd_emmc_b_clk0,
> + &gxbb_sd_emmc_c_clk0,
> };
>
> static struct clk_mux *const gxbb_clk_muxes[] = {
> @@ -1434,6 +1605,9 @@ static struct clk_mux *const gxbb_clk_muxes[] = {
> &gxbb_cts_mclk_i958_sel,
> &gxbb_cts_i958,
> &gxbb_32k_clk_sel,
> + &gxbb_sd_emmc_a_clk0_sel,
> + &gxbb_sd_emmc_b_clk0_sel,
> + &gxbb_sd_emmc_c_clk0_sel,
> };
>
> static struct clk_divider *const gxbb_clk_dividers[] = {
> @@ -1443,6 +1617,9 @@ static struct clk_divider *const gxbb_clk_dividers[] = {
> &gxbb_mali_1_div,
> &gxbb_cts_mclk_i958_div,
> &gxbb_32k_clk_div,
> + &gxbb_sd_emmc_a_clk0_div,
> + &gxbb_sd_emmc_b_clk0_div,
> + &gxbb_sd_emmc_c_clk0_div,
> };
>
> static struct meson_clk_audio_divider *const gxbb_audio_dividers[] = {
>
Applied to clk-meson's next/drivers.
More information about the linux-amlogic
mailing list