[PATCH v2 0/3] eMMC, SD-card and ethernet support for Vega S95 boards

Kevin Hilman khilman at baylibre.com
Wed Sep 7 13:06:27 PDT 2016


Hi Marrtin,

Martin Blumenstingl <martin.blumenstingl at googlemail.com> writes:

> This adds support for the internal eMMC, the SD-card slot and ethernet on
> all Tronsmart S95 Vega boards.
> There are some S95 Vega Meta clones out there where the bootloader does
> not configure the ethernet registers correctly, leading to non-working
> ethernet. This will be fixed in a separate series. Boards which are not
> suffering from broken bootloaders have fully working ethernet.
>
> Changes since v1:
> - rebased after latest updates which added the IR decoder to
>   meson-gxbb-vega-s95.dtsi
>
> Changes since the RFC:
> - added eMMC support
> - renamed fixed 3V3 regulator so it can be re-used for eMMC
>
>
> Martin Blumenstingl (3):
>   ARM64: dts: amlogic: SD card support for all Tronsmart Vega S95
>     devices
>   ARM64: dts: amlogic: eMMC support for all Tronsmart Vega S95 devices
>   ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices

I've applied the ethernet one, but I'm going to wait on the SD/eMMC
patches until the driver is finalized for the other one.

Thanks,

Kevin



More information about the linux-amlogic mailing list