[PATCH 06/13] scpi: add priv_scpi_ops and fill legacy structure

Sudeep Holla sudeep.holla at arm.com
Fri Aug 19 09:39:55 PDT 2016



On 18/08/16 11:10, Neil Armstrong wrote:
> In order to use the legacy functions variants, add a new priv_scpi_ops
> structure that will contain the internal alterne functions and then use these
> alternate call in the probe function.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  drivers/firmware/arm_scpi.c | 68 ++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 64 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
> index b0d911b..3fe39fe 100644
> --- a/drivers/firmware/arm_scpi.c
> +++ b/drivers/firmware/arm_scpi.c
> @@ -213,6 +213,7 @@ struct scpi_drvinfo {
>  	struct scpi_ops *scpi_ops;
>  	struct scpi_chan *channels;
>  	struct scpi_dvfs_info *dvfs[MAX_DVFS_DOMAINS];
> +	const struct priv_scpi_ops *ops;
>  };
>
>  /*
> @@ -299,6 +300,17 @@ struct dev_pstate_set {
>  	u8 pstate;
>  } __packed;
>
> +struct priv_scpi_ops {
> +	/* Internal Specific Ops */
> +	void (*handle_remote_msg)(struct mbox_client *c, void *msg);
> +	void (*tx_prepare)(struct mbox_client *c, void *msg);
> +	/* Message Specific Ops */
> +	int (*init_versions)(struct scpi_drvinfo *info);
> +	int (*dvfs_get_info)(u8 domain, struct dvfs_info *buf);
> +	/* System wide Ops */
> +	struct scpi_ops *scpi_ops;
> +};
> +


I fail to understand the need for this. Can you please explain the issue
you would face without this ?

>  static struct scpi_drvinfo *scpi_info;
>
>  static int scpi_linux_errmap[SCPI_ERR_MAX] = {
> @@ -695,9 +707,12 @@ static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain)
>  	if (scpi_info->dvfs[domain])	/* data already populated */
>  		return scpi_info->dvfs[domain];
>
> -	ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO, &domain, sizeof(domain),
> +	if (scpi_info->ops && scpi_info->ops->dvfs_get_info)
> +		ret = scpi_info->ops->dvfs_get_info(domain, &buf);
> +	else
> +		ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO,
> +					&domain, sizeof(domain),
>  				&buf, sizeof(buf));
> -
>  	if (ret)
>  		return ERR_PTR(ret);
>
> @@ -855,6 +870,22 @@ static struct scpi_ops scpi_ops = {
>  	.vendor_send_message = scpi_ext_send_message,
>  };
>
> +static struct scpi_ops legacy_scpi_ops = {
> +	.get_version = scpi_get_version,
> +	.clk_get_range = NULL,
> +	.clk_get_val = legacy_scpi_clk_get_val,
> +	.clk_set_val = legacy_scpi_clk_set_val,
> +	.dvfs_get_idx = legacy_scpi_dvfs_get_idx,
> +	.dvfs_set_idx = legacy_scpi_dvfs_set_idx,
> +	.dvfs_get_info = scpi_dvfs_get_info,
> +	.sensor_get_capability = legacy_scpi_sensor_get_capability,
> +	.sensor_get_info = legacy_scpi_sensor_get_info,
> +	.sensor_get_value = legacy_scpi_sensor_get_value,
> +	.device_get_power_state = NULL,
> +	.device_set_power_state = NULL,
> +	.vendor_send_message = legacy_scpi_send_message,

I think we need not have this at all if you follow the suggestion I had
in the previous patch. Try and let's see how it would look.

> +};
> +
>  struct scpi_ops *get_scpi_ops(void)
>  {
>  	return scpi_info ? scpi_info->scpi_ops : NULL;
> @@ -972,8 +1003,17 @@ static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch)
>  	return 0;
>  }
>
> +static const struct priv_scpi_ops scpi_legacy_ops = {
> +	.handle_remote_msg = legacy_scpi_handle_remote_msg,
> +	.tx_prepare = legacy_scpi_tx_prepare,
> +	.init_versions = legacy_scpi_init_versions,
> +	.dvfs_get_info = legacy_scpi_dvfs_get_info,
> +	.scpi_ops = &legacy_scpi_ops,
> +};
> +

Ditto, can go away.

-- 
Regards,
Sudeep



More information about the linux-amlogic mailing list