[PATCH 06/13] scpi: add priv_scpi_ops and fill legacy structure
Neil Armstrong
narmstrong at baylibre.com
Thu Aug 18 03:10:59 PDT 2016
In order to use the legacy functions variants, add a new priv_scpi_ops
structure that will contain the internal alterne functions and then use these
alternate call in the probe function.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
drivers/firmware/arm_scpi.c | 68 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 64 insertions(+), 4 deletions(-)
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index b0d911b..3fe39fe 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -213,6 +213,7 @@ struct scpi_drvinfo {
struct scpi_ops *scpi_ops;
struct scpi_chan *channels;
struct scpi_dvfs_info *dvfs[MAX_DVFS_DOMAINS];
+ const struct priv_scpi_ops *ops;
};
/*
@@ -299,6 +300,17 @@ struct dev_pstate_set {
u8 pstate;
} __packed;
+struct priv_scpi_ops {
+ /* Internal Specific Ops */
+ void (*handle_remote_msg)(struct mbox_client *c, void *msg);
+ void (*tx_prepare)(struct mbox_client *c, void *msg);
+ /* Message Specific Ops */
+ int (*init_versions)(struct scpi_drvinfo *info);
+ int (*dvfs_get_info)(u8 domain, struct dvfs_info *buf);
+ /* System wide Ops */
+ struct scpi_ops *scpi_ops;
+};
+
static struct scpi_drvinfo *scpi_info;
static int scpi_linux_errmap[SCPI_ERR_MAX] = {
@@ -695,9 +707,12 @@ static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain)
if (scpi_info->dvfs[domain]) /* data already populated */
return scpi_info->dvfs[domain];
- ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO, &domain, sizeof(domain),
+ if (scpi_info->ops && scpi_info->ops->dvfs_get_info)
+ ret = scpi_info->ops->dvfs_get_info(domain, &buf);
+ else
+ ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO,
+ &domain, sizeof(domain),
&buf, sizeof(buf));
-
if (ret)
return ERR_PTR(ret);
@@ -855,6 +870,22 @@ static struct scpi_ops scpi_ops = {
.vendor_send_message = scpi_ext_send_message,
};
+static struct scpi_ops legacy_scpi_ops = {
+ .get_version = scpi_get_version,
+ .clk_get_range = NULL,
+ .clk_get_val = legacy_scpi_clk_get_val,
+ .clk_set_val = legacy_scpi_clk_set_val,
+ .dvfs_get_idx = legacy_scpi_dvfs_get_idx,
+ .dvfs_set_idx = legacy_scpi_dvfs_set_idx,
+ .dvfs_get_info = scpi_dvfs_get_info,
+ .sensor_get_capability = legacy_scpi_sensor_get_capability,
+ .sensor_get_info = legacy_scpi_sensor_get_info,
+ .sensor_get_value = legacy_scpi_sensor_get_value,
+ .device_get_power_state = NULL,
+ .device_set_power_state = NULL,
+ .vendor_send_message = legacy_scpi_send_message,
+};
+
struct scpi_ops *get_scpi_ops(void)
{
return scpi_info ? scpi_info->scpi_ops : NULL;
@@ -972,8 +1003,17 @@ static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch)
return 0;
}
+static const struct priv_scpi_ops scpi_legacy_ops = {
+ .handle_remote_msg = legacy_scpi_handle_remote_msg,
+ .tx_prepare = legacy_scpi_tx_prepare,
+ .init_versions = legacy_scpi_init_versions,
+ .dvfs_get_info = legacy_scpi_dvfs_get_info,
+ .scpi_ops = &legacy_scpi_ops,
+};
+
static const struct of_device_id scpi_of_match[] = {
{.compatible = "arm,scpi"},
+ {.compatible = "amlogic,meson-gxbb-scpi", .data = &scpi_legacy_ops},
{},
};
@@ -986,11 +1026,18 @@ static int scpi_probe(struct platform_device *pdev)
struct scpi_chan *scpi_chan;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ const struct of_device_id *match;
+
+ match = of_match_device(scpi_of_match, &pdev->dev);
+ if (!match)
+ return -EINVAL;
scpi_info = devm_kzalloc(dev, sizeof(*scpi_info), GFP_KERNEL);
if (!scpi_info)
return -ENOMEM;
+ scpi_info->ops = match->data;
+
count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
if (count < 0) {
dev_err(dev, "no mboxes property in '%s'\n", np->full_name);
@@ -1023,7 +1070,13 @@ static int scpi_probe(struct platform_device *pdev)
pchan->tx_payload = pchan->rx_payload + (size >> 1);
cl->dev = dev;
- cl->rx_callback = scpi_handle_remote_msg;
+ if (scpi_info->ops && scpi_info->ops->handle_remote_msg)
+ cl->rx_callback = scpi_info->ops->handle_remote_msg;
+ else
+ cl->rx_callback = scpi_handle_remote_msg;
+ if (scpi_info->ops && scpi_info->ops->tx_prepare)
+ cl->tx_prepare = scpi_info->ops->tx_prepare;
+ else
cl->tx_prepare = scpi_tx_prepare;
cl->tx_block = true;
cl->tx_tout = 20;
@@ -1054,6 +1107,9 @@ err:
scpi_info->num_chans = count;
platform_set_drvdata(pdev, scpi_info);
+ if (scpi_info->ops && scpi_info->ops->init_versions)
+ ret = scpi_info->ops->init_versions(scpi_info);
+ else
ret = scpi_init_versions(scpi_info);
if (ret) {
dev_err(dev, "incorrect or no SCP firmware found\n");
@@ -1067,7 +1123,11 @@ err:
FW_REV_MAJOR(scpi_info->firmware_version),
FW_REV_MINOR(scpi_info->firmware_version),
FW_REV_PATCH(scpi_info->firmware_version));
- scpi_info->scpi_ops = &scpi_ops;
+
+ if (scpi_info->ops && scpi_info->ops->scpi_ops)
+ scpi_info->scpi_ops = scpi_info->ops->scpi_ops;
+ else
+ scpi_info->scpi_ops = &scpi_ops;
ret = sysfs_create_groups(&dev->kobj, versions_groups);
if (ret)
--
1.9.1
More information about the linux-amlogic
mailing list