[LEDE-DEV] procd mount wrong amount fo ram!

[Ansuel Smith]

Can this bug be fixed?

2018-01-26 11:14 GMT+01:00 Ansuel Smith <ansuelsmth at gmail.com>:
> Then the bug is real.
>
> Il 26 Gen 2018 08:01, "Nishant Sharma" <codemarauder at gmail.com> ha scritto:
>>
>> Hi,
>>
>> On Friday 26 January 2018 04:18 AM, Ansuel Smith wrote:
>>>
>>> https://forum.lede-project.org/t/no-space-left-in-tmp/11000/14
>>> Here you can find details about problem i find.
>>>
>>> In short. My setup have zram-swap and procd set to mount /tmp with
>>> zram... This result in /tmp mounted with zram with only 11 mb of my
>>> 512.... (even after i remove swap script...) If someone can explain me
>>> why... i think this is a bug and this broke sysupgrade, as it needs to
>>> upload the image in tmp, a 14 mb image to a 11 mb dir... Also
>>> sysupgrade from luci should detect that the upload was not complete
>>> and not say that the image provided is not valid...
>>
>>
>> I did this while compiling images and left with just around same amount of
>> /tmp even when I had 2 GB of RAM on board.
>>
>> Once I disabled the option "procd uses RAM to mount /tmp" and only enabled
>> the "ZRAM Swap", it was back to normal.
>>
>> I am not sure why it creates such a small zram device for /tmp when swap
>> device is around 50% of RAM.
>>
>> Regards,
>> Nishant
>>
>>
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev