[LEDE-DEV] Add asterisk13-chan-lantiq to LEDE packages mips_24kc

[Sebastian Kemper]

Hello Mathias,

Thank you for the explanation.

Sounds like the hen and egg problem to me. Maybe the only way to do it is not to depend on specific targets. I'll do some more brainstorming.

Kind regards,
Sebastian

Am 21. September 2017 22:35:58 MESZ schrieb Mathias Kresin <dev at kresin.me>:
>21.09.2017 20:35, Sebastian Kemper:
>> Hi all,
>> 
>> So now we have a broken-out asterisk-chan-lantiq package:
>>
>https://github.com/openwrt/telephony/tree/master/net/asterisk-chan-lantiq
>> 
>> I thought it would work like that, but the package still does not
>show
>> up in the target snapshot folder, e.g.
>>
>https://downloads.lede-project.org/snapshots/targets/lantiq/xrx200/packages/.
>> 
>> I looked it over again but couldn't spot the issue. But there must be
>> something wrong with it. There is one other nonshared package in the
>> feed, "usbip", and its packages show up fine.
>
>With the config used by the buildbots [0], it can be seen that 
>asterisk-chan-lantiq isn't build because it depends on asterisk.
>
>The asterisk package is a shared package and not selected by 
>CONFIG_ALL_NONSHARED=y.
>
>Mathias
>
>[0] 
>https://downloads.lede-project.org/snapshots/targets/lantiq/xrx200/config.seed
>
>_______________________________________________
>Lede-dev mailing list
>Lede-dev at lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/lede-dev