[LEDE-DEV] Add asterisk13-chan-lantiq to LEDE packages mips_24kc

[Sebastian Kemper]

Hi Tim,

There's a pull request to address that, https://github.com/openwrt/telephony/pull/187. When the maintainers have time I'm sure they will review it.

Best regards,
Seb

Am 20. September 2017 07:55:55 MESZ schrieb scansi at arcor.de:
>Hello all,
>
>thanks for your efforts, but the package is still not being built
>automatically. Anything missing?
>
>Best regards
>Tim
>
>> On September 13, 2017 at 3:36 PM Jiri Slachta <jiri at slachta.eu>
>wrote:
>> 
>> 
>> Hi Mathias,
>> 
>> thank you for letting me know. I hope this is fixed within this
>commit.
>> 
>>
>https://github.com/openwrt/telephony/commit/264f4e872fa307477f8cb2f23174c5b4a644d513
>> 
>> Kind regards,
>> Jiri
>> 
>> 2017-09-12 21:14 GMT+02:00 Mathias Kresin <dev at kresin.me>:
>> 
>> > 12.09.2017 20:28, Sebastian Kemper:
>> >
>> >> On Tue, Sep 12, 2017 at 12:49:54PM +0200, scansi at arcor.de wrote:
>> >>
>> >>> Hello all,
>> >>>
>> >>> can you please add asterisk13-chan-lantiq to the LEDE packages
>for
>> >>> mips_24kc? It's possible to build this package via the SDK and I
>would
>> >>> appreciate if you can build it automatically.
>> >>>
>> >>
>> >> Hi Tim,
>> >>
>> >> The package depends on TARGET_lantiq being set. Apparently that is
>not
>> >> correct (as the package isn't built). There are subtargets
>available, eg
>> >> TARGET_lantiq_falcon, TARGET_lantiq_xway and TARGET_lantiq_xrx200.
>> >> Maybe specifying one of these would work.
>> >>
>> >> Do you know the subtarget for your board?
>> >>
>> >
>> > The subtarget isn't the issue here. It is the way packages are
>build by
>> > the LEDE buildbots.
>> >
>> > We are building the packages only once for each combination of CPU
>> > architecture and CPU type. ar71xx and lantiq have mips-24kc set.
>Since
>> > ar71xx comes first in the alphabet, this target is most likely used
>to
>> > build all target independent packages.
>> >
>> > The issue is that asterisk-13.x (or more precisely
>asterisk13-chan-lantiq)
>> > is a target specific package since it has a dependency on target
>lantiq.
>> >
>> > Long story short, asterisk (if possible only the lantiq modules)
>need
>> > PKG_FLAGS:=nonshared.
>> >
>> > Please use the bugtracker of the telephony feed[0] for reporting
>asterisk
>> > bugs. asterisk is not part of the LEDE base system, it is
>maintained as
>> > part of the telephony feed. Do not get confused by the fact that it
>is in
>> > the OpenWrt repository. The packages feed is compatible to and used
>by
>> > OpenWrt as well as LEDE.
>> >
>> > I've added the asterisk maintainer in CC, to make him aware of the
>issue.
>> >
>> > Mathias
>> >
>> > [0] https://github.com/openwrt/telephony/issues
>> >