[LEDE-DEV] wlan issue with TP-LINK wdr3600

[e9hack]

Am 11.10.2017 um 21:43 schrieb Hauke Mehrtens:
> Hi,
> 
> I tested the new backports version with ath9k locally and did not saw
> this problem with my device.
> 
> Could you activate more debugging in hostapd by changing
> CONFIG_WPA_MSG_MIN_PRIORITY to 2 please.
> 
> In addition could you post your wireless configuration, with your keys
> removed also please and try the normal full hostapd version if you are
> able to reproduce it there too.
> 
> Hauke

Hi,

Is end the hostapd config files. They are generated by a modified hostapd.sh script.

hostapd-phy1.conf:
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=DE
ieee80211d=1
ieee80211h=1
hw_mode=a
beacon_int=100
channel=acs_survey
chanlist=36-140

ieee80211n=1
ht_coex=0
ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]

interface=wlan1
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
eap_server=1
ca_cert=????
server_cert=????
private_key=????
private_key_passwd=????
dh_file=????
eap_user_file=????
eapol_key_index_workaround=1
ieee8021x=1
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=????
bridge=br-lan
wpa_key_mgmt=WPA-EAP WPA-EAP-SHA256
okc=0
disable_pmksa_caching=1
ieee80211w=1
bssid=????

bss=wlan1-1
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=????
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=????
bridge=br-lan
wpa_key_mgmt=WPA-PSK WPA-PSK-SHA256
okc=0
disable_pmksa_caching=1
ieee80211w=1
bssid=????

bss=wlan1-2
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=????
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=????
bridge=br-tor
wpa_key_mgmt=WPA-PSK WPA-PSK-SHA256
okc=0
disable_pmksa_caching=1
ieee80211w=1
bssid=????

hostapd-phy0.conf:
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=DE
ieee80211d=1
hw_mode=g
beacon_int=100
channel=9

ieee80211n=1
ht_coex=0
ht_capab=[HT40-][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]

interface=wlan0
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=????
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=????
bridge=br-lan
wpa_key_mgmt=WPA-PSK WPA-PSK-SHA256
okc=0
disable_pmksa_caching=1
ieee80211w=1
bssid=????

bss=wlan0-1
ctrl_interface=/var/run/hostapd
ap_isolate=1
ap_max_inactivity=600
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_group_rekey=1800
wpa_passphrase=????
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=????
bridge=br-guest1
wpa_key_mgmt=WPA-PSK WPA-PSK-SHA256
okc=0
disable_pmksa_caching=1
ieee80211w=1
macaddr_acl=0
deny_mac_file=????
bssid=????


bss=wlan0-2
ctrl_interface=/var/run/hostapd
ap_isolate=1
ap_max_inactivity=600
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_group_rekey=1800
wpa_passphrase=????
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=????
bridge=br-guest2
wpa_key_mgmt=WPA-PSK WPA-PSK-SHA256
okc=0
disable_pmksa_caching=1
ieee80211w=1
macaddr_acl=0
deny_mac_file=????
bssid=????


bss=wlan0-3
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
eap_server=1
ca_cert=????
server_cert=????
private_key=????
private_key_passwd=????
dh_file=????
eap_user_file=????
eapol_key_index_workaround=1
ieee8021x=1
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=????
bridge=br-lan
wpa_key_mgmt=WPA-EAP WPA-EAP-SHA256
okc=0
disable_pmksa_caching=1
ieee80211w=1
bssid=????

bss=wlan0-4
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=????
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=????
bridge=br-tor
wpa_key_mgmt=WPA-PSK WPA-PSK-SHA256
okc=0
disable_pmksa_caching=1
ieee80211w=1
bssid=????

I'll send the debug output unmodified with CONFIG_WPA_MSG_MIN_PRIORITY set to 2 only to you and not to the list.

Regards,
Hartmut