[LEDE-DEV] [OpenWrt-Devel] MV88E6060 switch

[Sergey Ryazanov]

On Mon, Oct 9, 2017 at 12:00 AM, Nerijus Baliunas
<nerijus at users.sourceforge.net> wrote:
> On Sun, 8 Oct 2017 23:44:58 +0300 Sergey Ryazanov <ryazanov.s.a at gmail.com> wrote:
>> > I assigned IP with a command
>> > ip a a 192.168.0.10/24 dev eth0
>> >
>> > but ping from PC does not answer.
>>
>> Have you bring eth0 UP? I mean, could you do "ifconfig eth0
>> 192.168.0.10 up" and try pinging again?
>
> Just tried:
> # ifconfig eth0 192.168.0.10 up
> ifconfig: SIOCSIFFLAGS: Out of memory
> # dmesg|grep eth
> [    0.998445] eth0: MII PHY 32 on NPE-B
> [    1.005134] eth1: MII PHY 1 on NPE-C
> [    6.540687] eth0: link up, speed 100 Mb/s, full duplex
> [    9.323993] eth0: link down
> [   36.266247] device eth0 entered promiscuous mode

Check please, is there any new kernel messages after 'ifconfig ... up'
failure (may be not directly related to eth0). Just run dmesg without
grep.

It is also stranger that something bring eth0 up and then putting it
back to down. Is these strings (eth0: link up/eth0: link down) appear
in the kernel log during preinit procedure?

-- 
Sergey