[OpenWrt-Devel] MV88E6060 switch

[Nerijus Baliunas]

On Sun, 8 Oct 2017 23:44:58 +0300 Sergey Ryazanov <ryazanov.s.a at gmail.com> wrote:

> > I assigned IP with a command
> > ip a a 192.168.0.10/24 dev eth0
> >
> > but ping from PC does not answer.
>
> Have you bring eth0 UP? I mean, could you do "ifconfig eth0
> 192.168.0.10 up" and try pinging again?

Just tried:
# ifconfig eth0 192.168.0.10 up
ifconfig: SIOCSIFFLAGS: Out of memory
# dmesg|grep eth
[    0.998445] eth0: MII PHY 32 on NPE-B
[    1.005134] eth1: MII PHY 1 on NPE-C
[    6.540687] eth0: link up, speed 100 Mb/s, full duplex
[    9.323993] eth0: link down
[   36.266247] device eth0 entered promiscuous mode
# ifconfig eth0 192.168.0.10 up
ifconfig: SIOCSIFFLAGS: Out of memory
# ifconfig -a
br-lan    Link encap:Ethernet  HWaddr 00:18:39:21:0D:AE  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fde1:e263:bcc::1/60 Scope:Global
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth0      Link encap:Ethernet  HWaddr 00:18:39:21:0D:AE  
          inet addr:192.168.0.10  Bcast:192.168.0.255  Mask:255.255.255.0
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:92 (92.0 B)  TX bytes:1551 (1.5 KiB)

Ping still does not answer.

Regards,
Nerijus