[LEDE-DEV] ubiquiti erx-sfp in stable?

[Torbjorn Jansson]

yes, the fiber port does not work.
i have the same problem and was using it on edgeos, so i had to redo a few things.

i also get lots of errors like:
[491283.300000] do_page_fault(): sending SIGSEGV to sh for invalid read access 
from 44030892
[491283.300000] do_page_fault(): sending SIGSEGV to sh for invalid read access 
from 44030892
[491283.300000] epc = 0041c317 in busybox[400000+4c000]
[491283.300000] ra  = 0041c2a7 in busybox[400000+4c000]
[491283.350000] epc = 0041c317 in busybox[400000+4c000]
[491283.360000] ra  = 0041c2a7 in busybox[400000+4c000]

i have no idea what is causing them or why busybox is crashing.



On 2017-07-28 00:44, Gerry Rozema wrote:
> I have a couple of these sfp units kicking around here, using them for a fiber 
> link between the house and an outbuilding.
> 
> When I tried a bunch of months back, was unable to get the fiber port working 
> with any of the lede / openwrt build on it.
> 
> Is the fiber port functional now ?  I'd really like to swap out the firmware 
> for something I can build myself, but,  I need the fiber port running.
> 
> 
> 
> On 2017-07-24 03:49 PM, Sven Roederer wrote:
>> On Montag, 17. Juli 2017 14:05:20 CEST Torbjorn Jansson wrote:
>>> Hello
>>>
>>> a question, any idea when the updates that was made to erx-sfp will make
>>> it into a stable release?
>>>
>> Hi all,
>>
>> there is a cheap patch I made to backport the ERX-SFP support to the 17.01
>> branch.
>> It's not perfect, but it's creating a correct board "ubnt-erx-sfp".
>>
>> Probably someone likes to improve this, as I'm short in time for the next
>> weeks+.
>> The code can be found : https://github.com/freifunk-berlin/firmware/pull/477
>>
>> Sven
>>