[LEDE-DEV] Hardware for VDSL with ISDN or 4 x TAE (VoIP) ?

[John Crispin]

On 10/09/2016 11:27, Alberto Bursi wrote:
> Usually modem-routers are not supported because the modem part is closed
> source.
> 

lantiq target supports adsl and vdsl modem hw

	John

> You need to buy a separate modem device and connect it to a pure router
> (not modem-router) through ethernet, in pppoe bridging.
> 
> So that the router is the device doing the login to the ISP, and the
> modem is doing the work.
> 
> 
> 
> On 09/10/2016 09:12 AM, Dennis Schneck wrote:
>>
>>   Hello,
>> what Router is recommendation for VDSL and VOIP with a ISDN-Port or 4x
>> TAE Ports
>> to use with lede-project Firmware. So that I can replace the Fritzbox
>> 7490 from the Internet-Provider.
>>   That I am able to Surf and Phone
>>   And if possible to add a additonal Phone Number
>> with an other VoIP Provider (Sipgare for example)
>>   Thanks a lot.
>>   Dennis
>>  
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev
> 
> 
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev