[LEDE-DEV] [PATCH v3 02/13] scripts: fix formatting
John Crispin
john at phrozen.org
Thu Oct 27 03:15:43 PDT 2016
patch looks good but subject and description do not match
John
On 06/10/2016 10:50, Jan-Tarek Butt wrote:
> remove whitespaces on end of lines
>
> Signed-off-by: Jan-Tarek Butt <tarek at ring0.de>
> ---
> scripts/combined-ext-image.sh | 4 ++--
> scripts/flashing/flash.sh | 6 +++---
> scripts/patch-kernel.sh | 20 ++++++++++----------
> scripts/rstrip.sh | 2 +-
> 4 files changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/scripts/combined-ext-image.sh b/scripts/combined-ext-image.sh
> index e54ae3a..c01cf40 100755
> --- a/scripts/combined-ext-image.sh
> +++ b/scripts/combined-ext-image.sh
> @@ -9,7 +9,7 @@
> # Write image header followed by all specified files
> # The header is padded to 64k, format is:
> # CE magic word ("Combined Extended Image") (2 bytes)
> -# <CE_VERSION> file format version field (2 bytes)
> +# <CE_VERSION> file format version field (2 bytes)
> # <TYPE> short description of the target device (32 bytes)
> # <NUM FILES> number of files following the header (2 byte)
> # <file1_name> name of the first file (32 bytes)
> @@ -20,7 +20,7 @@
> # <fileN_md5> md5 checksum of the Nth file (32 bytes)
>
> ## version history
> -# * version 1: initial file format with num files / name / length / md5 checksum
> +# * version 1: initial file format with num files / name / length / md5 checksum
>
> ME="${0##*/}"
>
> diff --git a/scripts/flashing/flash.sh b/scripts/flashing/flash.sh
> index 7f2cdf5..8973aac 100755
> --- a/scripts/flashing/flash.sh
> +++ b/scripts/flashing/flash.sh
> @@ -1,6 +1,6 @@
> #!/bin/bash
> #
> -# tftp flash script for wireless routers
> +# tftp flash script for wireless routers
> #
> # Copyright (C) 2004 by Oleg I. Vdovikin <oleg at cs.msu.su>
> # Copyright (C) 2005 by Waldemar Brodkorb <wbx at openwrt.org>
> @@ -24,10 +24,10 @@ if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then
> echo Usage: "$0" firmware vendor
> cat << EOF
> IMPORTANT:
> -Notes for Linksys / Asus WL500gx router:
> +Notes for Linksys / Asus WL500gx router:
> be sure you have set boot_wait to yes. Power on your router
> after executing this script.
> -
> +
> Notes for Asus WL500g router:
> be sure POWER led is flashing (If this is not the case
> poweroff the device, push the reset button & power on
> diff --git a/scripts/patch-kernel.sh b/scripts/patch-kernel.sh
> index f0f294e..4ca8783 100755
> --- a/scripts/patch-kernel.sh
> +++ b/scripts/patch-kernel.sh
> @@ -18,25 +18,25 @@ if [ ! -d "${patchdir}" ] ; then
> echo "Aborting. '${patchdir}' is not a directory."
> exit 1
> fi
> -
> -for i in ${patchdir}/${patchpattern} ; do
> +
> +for i in ${patchdir}/${patchpattern} ; do
> case "$i" in
> *.gz)
> - type="gzip"; uncomp="gunzip -dc"; ;;
> + type="gzip"; uncomp="gunzip -dc"; ;;
> *.bz)
> - type="bzip"; uncomp="bunzip -dc"; ;;
> + type="bzip"; uncomp="bunzip -dc"; ;;
> *.bz2)
> - type="bzip2"; uncomp="bunzip2 -dc"; ;;
> + type="bzip2"; uncomp="bunzip2 -dc"; ;;
> *.zip)
> - type="zip"; uncomp="unzip -d"; ;;
> + type="zip"; uncomp="unzip -d"; ;;
> *.Z)
> - type="compress"; uncomp="uncompress -c"; ;;
> + type="compress"; uncomp="uncompress -c"; ;;
> *)
> - type="plaintext"; uncomp="cat"; ;;
> + type="plaintext"; uncomp="cat"; ;;
> esac
> - [ -d "${i}" ] && echo "Ignoring subdirectory ${i}" && continue
> + [ -d "${i}" ] && echo "Ignoring subdirectory ${i}" && continue
> echo ""
> - echo "Applying ${i} using ${type}: "
> + echo "Applying ${i} using ${type}: "
> ${uncomp} "${i}" | ${PATCH:-patch} -f -p1 -d "${targetdir}"
> if [ $? != 0 ] ; then
> echo "Patch failed! Please fix $i!"
> diff --git a/scripts/rstrip.sh b/scripts/rstrip.sh
> index 5c8a5aa..57c76c0 100755
> --- a/scripts/rstrip.sh
> +++ b/scripts/rstrip.sh
> @@ -1,5 +1,5 @@
> #!/usr/bin/env bash
> -#
> +#
> # Copyright (C) 2006 OpenWrt.org
> #
> # This is free software, licensed under the GNU General Public License v2.
>
More information about the Lede-dev
mailing list