[LEDE-DEV] [PATCH v3 02/13] scripts: fix formatting

[Jan-Tarek Butt]

remove whitespaces on end of lines

Signed-off-by: Jan-Tarek Butt <tarek at ring0.de>
---
 scripts/combined-ext-image.sh |  4 ++--
 scripts/flashing/flash.sh     |  6 +++---
 scripts/patch-kernel.sh       | 20 ++++++++++----------
 scripts/rstrip.sh             |  2 +-
 4 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/scripts/combined-ext-image.sh b/scripts/combined-ext-image.sh
index e54ae3a..c01cf40 100755
--- a/scripts/combined-ext-image.sh
+++ b/scripts/combined-ext-image.sh
@@ -9,7 +9,7 @@
 # Write image header followed by all specified files
 # The header is padded to 64k, format is:
 #  CE               magic word ("Combined Extended Image") (2 bytes)
-#  <CE_VERSION>     file format version field (2 bytes) 
+#  <CE_VERSION>     file format version field (2 bytes)
 #  <TYPE>           short description of the target device (32 bytes)
 #  <NUM FILES>      number of files following the header (2 byte)
 #  <file1_name>     name of the first file (32 bytes)
@@ -20,7 +20,7 @@
 #  <fileN_md5>      md5 checksum of the Nth file (32 bytes)
 
 ## version history
-# * version 1: initial file format with num files / name / length / md5 checksum 
+# * version 1: initial file format with num files / name / length / md5 checksum
 
 ME="${0##*/}"
 
diff --git a/scripts/flashing/flash.sh b/scripts/flashing/flash.sh
index 7f2cdf5..8973aac 100755
--- a/scripts/flashing/flash.sh
+++ b/scripts/flashing/flash.sh
@@ -1,6 +1,6 @@
 #!/bin/bash
 #
-# tftp flash script for wireless routers 
+# tftp flash script for wireless routers
 #
 # Copyright (C) 2004 by Oleg I. Vdovikin <oleg at cs.msu.su>
 # Copyright (C) 2005 by Waldemar Brodkorb <wbx at openwrt.org>
@@ -24,10 +24,10 @@ if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then
     echo Usage: "$0" firmware vendor
 cat << EOF
 IMPORTANT:
-Notes for Linksys / Asus WL500gx router: 
+Notes for Linksys / Asus WL500gx router:
    be sure you have set boot_wait to yes. Power on your router
    after executing this script.
- 
+
 Notes for Asus WL500g router:
    be sure POWER led is flashing (If this is not the case
    poweroff the device, push the reset button & power on
diff --git a/scripts/patch-kernel.sh b/scripts/patch-kernel.sh
index f0f294e..4ca8783 100755
--- a/scripts/patch-kernel.sh
+++ b/scripts/patch-kernel.sh
@@ -18,25 +18,25 @@ if [ ! -d "${patchdir}" ] ; then
     echo "Aborting.  '${patchdir}' is not a directory."
     exit 1
 fi
-    
-for i in ${patchdir}/${patchpattern} ; do 
+
+for i in ${patchdir}/${patchpattern} ; do
     case "$i" in
 	*.gz)
-	type="gzip"; uncomp="gunzip -dc"; ;; 
+	type="gzip"; uncomp="gunzip -dc"; ;;
 	*.bz)
-	type="bzip"; uncomp="bunzip -dc"; ;; 
+	type="bzip"; uncomp="bunzip -dc"; ;;
 	*.bz2)
-	type="bzip2"; uncomp="bunzip2 -dc"; ;; 
+	type="bzip2"; uncomp="bunzip2 -dc"; ;;
 	*.zip)
-	type="zip"; uncomp="unzip -d"; ;; 
+	type="zip"; uncomp="unzip -d"; ;;
 	*.Z)
-	type="compress"; uncomp="uncompress -c"; ;; 
+	type="compress"; uncomp="uncompress -c"; ;;
 	*)
-	type="plaintext"; uncomp="cat"; ;; 
+	type="plaintext"; uncomp="cat"; ;;
     esac
-    [ -d "${i}" ] && echo "Ignoring subdirectory ${i}" && continue	
+    [ -d "${i}" ] && echo "Ignoring subdirectory ${i}" && continue
     echo ""
-    echo "Applying ${i} using ${type}: " 
+    echo "Applying ${i} using ${type}: "
     ${uncomp} "${i}" | ${PATCH:-patch} -f -p1 -d "${targetdir}"
     if [ $? != 0 ] ; then
         echo "Patch failed!  Please fix $i!"
diff --git a/scripts/rstrip.sh b/scripts/rstrip.sh
index 5c8a5aa..57c76c0 100755
--- a/scripts/rstrip.sh
+++ b/scripts/rstrip.sh
@@ -1,5 +1,5 @@
 #!/usr/bin/env bash
-# 
+#
 # Copyright (C) 2006 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
-- 
2.10.0