[LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4

Rafał Miłecki zajec5 at gmail.com
Mon Oct 24 22:02:59 PDT 2016

On 24 October 2016 at 18:43,  <p.wassi at gmx.at> wrote:
>> I started working on this today, I reproduce see the issue during a
>> lot of tests until it magically disappeared. Then LEDE started booting
>> on my unit with kernel 4.4.
> Oh - that rings a bell.
> May I point you to a discussion we had earlier this year?
> http://lists.infradead.org/pipermail/lede-dev/2016-May/000980.html
> I had this issue on all my WRT54GLs:
> trunk images stopped booting at "Starting program at 0x80001000".
> However, if I compiled the images myself (with the exact same configuration
> as the buildbot), the images would boot fine.
> I later checked again: buildbot's images did not boot.
> (It was kernel 4.1 back then, but it's the exact same behaviour as you describe
> in the commit message)
> Additionally builtbot's images worked out-of-the-box on an ASUS WL500gP V2.

It seems I'm experiencing the same crazy problem. Local builds work
for me (as explained in commit message), but image from buildbot
doesn't boot. This is some totally crazy thing :|


More information about the Lede-dev mailing list