[LEDE-DEV] [PATCH] apm821xx: replace recovery image for the MBL with initramfs
Christian Lamparter
chunkeey at googlemail.com
Fri Oct 7 11:29:03 PDT 2016
The patch "images: bump default rootfs size to 256 MB"
a1f83bad606411a561e8e60110c71232b1a28aa2 caused a crash
during boot for the recovery images. This is because
both variants of the MyBook Live only have 256MB of RAM
and for the recovery option, the ext4 rootfs was simply
stored in the RAMDISK.
This patch replaces recovery image for the MBL with an
initramfs kernel.
In order to boot the initramfs (for recovery or development):
0. copy the initramfs and device tree into tftp's server directory
# cp *-initramfs-kernel.bin to /tftp-server/mbl.bin
# cp *-ext4-kernel.dtb to /tftp-server/fdt.bin
1. Connect the MyBook Live (Duo) serial port.
(Warning! Use a 3.3v level shifter).
2. Hit Enter during u-boot and insert these three lines:
# setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1;
# tftp ${kernel_addr_r} mbl.bin; tftp ${fdt_addr_r} fdt.bin
# run addtty addmisc; bootm ${kernel_addr_r} - ${fdt_addr_r}
Where 192.168.1.254 is your TFTP server.
Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
target/linux/apm821xx/image/Makefile | 22 +-----
.../linux/apm821xx/image/mbl_gen_recovery_tar.sh | 92 ----------------------
target/linux/apm821xx/sata/config-default | 5 --
target/linux/apm821xx/sata/target.mk | 2 +-
4 files changed, 3 insertions(+), 118 deletions(-)
delete mode 100644 target/linux/apm821xx/image/mbl_gen_recovery_tar.sh
diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile
index 607df06..fb1705e 100644
--- a/target/linux/apm821xx/image/Makefile
+++ b/target/linux/apm821xx/image/Makefile
@@ -196,24 +196,6 @@ define Build/hdd-img
$(if $(CONFIG_TARGET_IMAGES_GZIP),gzip -9n -c $@ > $(BIN_DIR)/$(notdir $@).gz)
endef
-define Build/uRamdisk
- $(STAGING_DIR_HOST)/bin/mkimage \
- -A powerpc -T ramdisk -C gzip \
- -n "$(DEVICE_NAME) rootfs" \
- -d $@ $@.new
- mv $@.new $@
-endef
-
-define Build/recovery-tar
- sh ./mbl_gen_recovery_tar.sh \
- --profile $(DEVICE_PROFILE) \
- --dtb $(IMAGE_KERNEL).dtb \
- --dtbname $(DEVICE_DTB) \
- --kernel $(IMAGE_KERNEL) \
- --rootfs $@ \
- $@
-endef
-
define Build/export-dtb
cp $(IMAGE_KERNEL).dtb $@
endef
@@ -223,13 +205,13 @@ define Device/MyBookLiveDefault
BLOCKSIZE := 1k
DTB_SIZE := 16384
KERNEL := kernel-bin | dtb | gzip | uImage gzip
+ KERNEL_INITRAMFS := kernel-bin | dtb | gzip | uImage gzip
BOOT_SIZE := 8
- IMAGES := rootfs.img recovery.tar kernel.dtb
+ IMAGES := rootfs.img kernel.dtb
DEVICE_DTB := apollo3g.dtb
FILESYSTEMS := ext4
IMAGE/kernel.dtb := export-dtb
IMAGE/rootfs.img := boot-script | boot-img | hdd-img
- IMAGE/recovery.tar := append-rootfs | gzip | uRamdisk | recovery-tar
endef
define Device/MyBookLiveSingle
diff --git a/target/linux/apm821xx/image/mbl_gen_recovery_tar.sh b/target/linux/apm821xx/image/mbl_gen_recovery_tar.sh
deleted file mode 100644
index f871aef..0000000
--- a/target/linux/apm821xx/image/mbl_gen_recovery_tar.sh
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/sh
-
-# based on scripts/sysupgrade-nand.sh
-
-profile=""
-dtb=""
-dtbname=""
-kernel=""
-rootfs=""
-outfile=""
-err=""
-
-while [ "$1" ]; do
- case "$1" in
- "--profile")
- profile="$2"
- shift
- shift
- continue
- ;;
- "--dtb")
- dtb="$2"
- shift
- shift
- continue
- ;;
- "--dtbname")
- dtbname="$2"
- shift
- shift
- continue
- ;;
- "--kernel")
- kernel="$2"
- shift
- shift
- continue
- ;;
- "--rootfs")
- rootfs="$2"
- shift
- shift
- continue
- ;;
- *)
- if [ ! "$outfile" ]; then
- outfile=$1
- shift
- continue
- else
- shift
- continue
- fi
- ;;
- esac
-done
-
-if [ -z "$profile" -o ! -r "$dtb" -o ! -r "$kernel" -o ! -r "$rootfs" -o ! "$outfile" ]; then
- echo "syntax: $0 [--profile profilename] [--dtb dtbimage] [--dtbname dtbname] [--kernel kernelimage] [--rootfs rootfs] out"
- exit 1
-fi
-
-tmpdir="$( mktemp -d 2> /dev/null )"
-if [ -z "$tmpdir" ]; then
- # try OSX signature
- tmpdir="$( mktemp -t 'roottmp' -d )"
-fi
-
-if [ -z "$tmpdir" ]; then
- exit 1
-fi
-
-mkdir -p "${tmpdir}/${profile}"
-[ -z "${dtb}" ] || cp "${dtb}" "${tmpdir}/${profile}/${dtbname}"
-[ -z "${rootfs}" ] || cp "${rootfs}" "${tmpdir}/${profile}/uRamdisk"
-[ -z "${kernel}" ] || cp "${kernel}" "${tmpdir}/${profile}/uImage"
-
-mtime=""
-if [ -n "$SOURCE_DATE_EPOCH" ]; then
- mtime="--mtime=@${SOURCE_DATE_EPOCH}"
-fi
-
-(cd "$tmpdir"; tar cvf ${profile}.tar ${profile} ${mtime})
-err="$?"
-if [ -e "$tmpdir/${profile}.tar" ]; then
- cp "$tmpdir/${profile}.tar" "$outfile"
-else
- err=2
-fi
-rm -rf "$tmpdir"
-
-exit $err
diff --git a/target/linux/apm821xx/sata/config-default b/target/linux/apm821xx/sata/config-default
index 5abc105..b8342de 100644
--- a/target/linux/apm821xx/sata/config-default
+++ b/target/linux/apm821xx/sata/config-default
@@ -17,7 +17,6 @@ CONFIG_SATA_DWC=y
CONFIG_EXT4_FS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_RAM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
@@ -26,9 +25,6 @@ CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_BLK_DEV_DM=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_MD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
@@ -37,7 +33,6 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
-CONFIG_BLK_DEV_RAM_SIZE=50331648
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_44x=y
# CONFIG_PPC_EARLY_DEBUG_MEMCONS is not set
diff --git a/target/linux/apm821xx/sata/target.mk b/target/linux/apm821xx/sata/target.mk
index c652fe4..1c78568 100644
--- a/target/linux/apm821xx/sata/target.mk
+++ b/target/linux/apm821xx/sata/target.mk
@@ -1,5 +1,5 @@
BOARDNAME := Devices which boot from SATA (NAS)
-FEATURES += ext4 usb
+FEATURES += ext4 usb ramdisk
DEFAULT_PACKAGES += badblocks block-mount e2fsprogs \
kmod-dm kmod-md-mod partx-utils
--
2.9.3
More information about the Lede-dev
mailing list