[LEDE-DEV] ar71xx: Fix switch config on Mikrotik RB450/G
Mathias Kresin
dev at kresin.me
Thu Nov 17 13:13:52 PST 2016
Hey João,
both patches you have send are whitespace mangled by your mail program
and do not apply:
$ git am LEDE-DEV-ar71xx-enable-serial-console-on-mikrotik-devices.patch
Applying: ar71xx: enable serial console on mikrotik devices
error: patch failed:
target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch:1
error:
target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch:
patch does not apply
Patch failed at 0001 ar71xx: enable serial console on mikrotik devices
Please consider using 'git send-email' to prevent such issues. You can
find your broken patches in out patchwork at
https://patchwork.ozlabs.org/project/lede/list/?submitter=70405&state=*
to test it by yourself.
16.11.2016 18:17, João Chaínho:
> This patch fixes switch initial config on Mikrotik RB450/G
> Signed-off-by: João Chaínho <joaochainho at gmail.com>
> ---
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
> index df87c96..daf9495 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> @@ -343,13 +343,13 @@ ar71xx_setup_interfaces()
> rb-450)
> ucidef_set_interfaces_lan_wan "eth1" "eth0"
> ucidef_add_switch "switch0" \
> - "0:lan" "1:lan" "2:lan" "3:lan" "5 at eth1"
> + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5 at eth1"
> ;;
> rb-450g|\
> routerstation-pro)
> ucidef_set_interfaces_lan_wan "eth1" "eth0"
> ucidef_add_switch "switch0" \
> - "0 at eth1" "2:lan:3" "3:lan:2" "4:lan:1"
> + "0 at eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
You are changing the default switch config for the routerstation-pro as
well. Is this tested? It seams to me you're fixing one board and
breaking another.
Mathias
More information about the Lede-dev
mailing list