[LEDE-DEV] WRT1900ACS - Kernel 4.4.11 boot failure

Dheeran Senthilvel dheeranmech at gmail.com
Sun May 22 02:52:46 PDT 2016


> On 22-May-2016, at 3:21 PM, Dheeran Senthilvel <dheeranmech at gmail.com> wrote:
> 
> 
>> On 22-May-2016, at 3:02 PM, Dheeran Senthilvel <dheeranmech at gmail.com> wrote:
>> 
>> 
>>> On 21-May-2016, at 7:55 PM, Dheeran Senthilvel <dheeranmech at gmail.com> wrote:
>>> 
>>> 
>>>> On 21-May-2016, at 6:48 PM, Felix Fietkau <nbd at nbd.name> wrote:
>>>> 
>>>> On 2016-05-21 14:05, Dheeran Senthilvel wrote:
>>>>> Hi Guys,
>>>>> 	
>>>>> Nice work there getting everything to Linux 4.4.11. Tested the new
>>>>> build (r321 dated 20/05/2016) Everything is seems to work pretty
>>>>> decently, except that upon reboot (both manually or through command
>>>>> line) the device is struck. When serially accessed an error is seen
>>>> Please make a clean build from the latest version and reflash the image
>>>> from the boot loader. I just pushed some flash driver fixes...
>>>> 
>>>> - Felix
>>> 
>>> Thanks will try and will reply.
>>> 
>> 
>> Hi, 
>> 
>> 	Pretty quick work there, having merged the new mwlwifi driver. The driver does improve performance - 374MBytes/s at 2.4g and 1645MBytes/s at 5g using iperf for 30sec flooding. Also the long pings reported previously on OEM and lede/openwrt seems to have been rectified on this new driver.
>> 
>> 	Also the LEDs now work by default. Thanks again for that quick fix.
>> 
>> 	But the NAND fix did not fix my problem of reboot/boot crashing. Same error
>> 
>> Regards
>> Dheeran
> 
> Running r339
> 
> root at lede:/# uname -a 
> 
> Linux lede 4.4.11 #1 SMP Sat May 21 22:47:44 UTC 2016 armv7l GNU/Linux
> 
> This is serial output after reboot command 
> 
> [ 1237.769778] br-lan: port 3(wlan0) entered disabled state
> [ 1237.775198] br-lan: port 2(wlan1) entered disabled state
> [ 1237.780566] br-lan: port 1(eth1) entered disabled state
> [ 1237.788228] device eth1 left promiscuous mode
> [ 1237.792676] br-lan: port 1(eth1) entered disabled state
> [ 1237.803425] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 1237.810859] device wlan0 left promiscuous mode
> [ 1237.815361] br-lan: port 3(wlan0) entered disabled state
> [ 1237.820853] device wlan1 left promiscuous mode
> [ 1237.825347] br-lan: port 2(wlan1) entered disabled state
> [ 1239.000372] UBIFS (ubi1:0): un-mount UBI device 1
> [ 1239.005105] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
> crond[985]: USER root pid 2226 cmd /sbin/fan_ctrl.sh
> [ 1242.121994] reboot: Restarting system
> S-ENV offset == 0x240000
> 
> If you need anything else please mail me i will definitely try to my best to help to diagnose the problem.
> 
> Regards
> Dheeran

Haven’t setup a build system on my PC. Currently testing from the snapshot from the repos




More information about the Lede-dev mailing list