[LEDE-DEV] WRT1900ACS - Kernel 4.4.11 boot failure

[Dheeran Senthilvel]

> On 22-May-2016, at 3:02 PM, Dheeran Senthilvel <dheeranmech at gmail.com> wrote:
> 
> 
>> On 21-May-2016, at 7:55 PM, Dheeran Senthilvel <dheeranmech at gmail.com> wrote:
>> 
>> 
>>> On 21-May-2016, at 6:48 PM, Felix Fietkau <nbd at nbd.name> wrote:
>>> 
>>> On 2016-05-21 14:05, Dheeran Senthilvel wrote:
>>>> Hi Guys,
>>>> 	
>>>> Nice work there getting everything to Linux 4.4.11. Tested the new
>>>> build (r321 dated 20/05/2016) Everything is seems to work pretty
>>>> decently, except that upon reboot (both manually or through command
>>>> line) the device is struck. When serially accessed an error is seen
>>> Please make a clean build from the latest version and reflash the image
>>> from the boot loader. I just pushed some flash driver fixes...
>>> 
>>> - Felix
>> 
>> Thanks will try and will reply.
>> 
> 
> Hi, 
> 
> 	Pretty quick work there, having merged the new mwlwifi driver. The driver does improve performance - 374MBytes/s at 2.4g and 1645MBytes/s at 5g using iperf for 30sec flooding. Also the long pings reported previously on OEM and lede/openwrt seems to have been rectified on this new driver.
> 
> 	Also the LEDs now work by default. Thanks again for that quick fix.
> 
> 	But the NAND fix did not fix my problem of reboot/boot crashing. Same error
> 
> Regards
> Dheeran

Running r339

root at lede:/# uname -a 

Linux lede 4.4.11 #1 SMP Sat May 21 22:47:44 UTC 2016 armv7l GNU/Linux

This is serial output after reboot command 

[ 1237.769778] br-lan: port 3(wlan0) entered disabled state
[ 1237.775198] br-lan: port 2(wlan1) entered disabled state
[ 1237.780566] br-lan: port 1(eth1) entered disabled state
[ 1237.788228] device eth1 left promiscuous mode
[ 1237.792676] br-lan: port 1(eth1) entered disabled state
[ 1237.803425] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1237.810859] device wlan0 left promiscuous mode
[ 1237.815361] br-lan: port 3(wlan0) entered disabled state
[ 1237.820853] device wlan1 left promiscuous mode
[ 1237.825347] br-lan: port 2(wlan1) entered disabled state
[ 1239.000372] UBIFS (ubi1:0): un-mount UBI device 1
[ 1239.005105] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
crond[985]: USER root pid 2226 cmd /sbin/fan_ctrl.sh
[ 1242.121994] reboot: Restarting system
S-ENV offset == 0x240000

If you need anything else please mail me i will definitely try to my best to help to diagnose the problem.

Regards
Dheeran