[LEDE-DEV] [PATCH] modules: add BMP085 pressure sensor

[Dirk Neukirchen]

add BMP085 and BMP180 pressure sensors
this driver supports the SPI and I2C and
older chips (BMP280 is supported by iio subsystem)

issue found when cleaning up omap/config

found while writing this patch that a
similar patch was submitted in June/July 2014 but not integrated

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen at web.de>
---
 package/kernel/linux/modules/other.mk | 48 +++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/package/kernel/linux/modules/other.mk b/package/kernel/linux/modules/other.mk
index 11d836e..bc7fb7c 100644
--- a/package/kernel/linux/modules/other.mk
+++ b/package/kernel/linux/modules/other.mk
@@ -990,3 +990,51 @@ define KernelPackage/echo/description
 endef
 
 $(eval $(call KernelPackage,echo))
+
+
+define KernelPackage/bmp085
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=BMP085/BMP18x pressure sensor
+  DEPENDS:= +kmod-regmap
+  KCONFIG:= CONFIG_BMP085
+  FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
+endef
+
+define KernelPackage/bmp085/description
+ This driver adds support for Bosch Sensortec's digital pressure
+ sensors BMP085 and BMP18x.
+endef
+
+$(eval $(call KernelPackage,bmp085))
+
+
+define KernelPackage/bmp085-i2c
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=BMP085/BMP18x pressure sensor I2C
+  DEPENDS:= +kmod-bmp085
+  KCONFIG:= CONFIG_BMP085_I2C
+  FILES:= $(LINUX_DIR)/drivers/misc/bmp085-i2c.ko
+  AUTOLOAD:=$(call AutoProbe,bmp085-i2c)
+endef
+define KernelPackage/bmp085-i2c/description
+ This driver adds support for Bosch Sensortec's digital pressure
+ sensor connected via I2C.
+endef
+
+$(eval $(call KernelPackage,bmp085-i2c))
+
+
+define KernelPackage/bmp085-spi
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=BMP085/BMP18x pressure sensor SPI
+  DEPENDS:= +kmod-bmp085
+  KCONFIG:= CONFIG_BMP085_SPI
+  FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
+  AUTOLOAD:=$(call AutoProbe,bm085-spi)
+endef
+define KernelPackage/bmp085-spi/description
+ This driver adds support for Bosch Sensortec's digital pressure
+ sensor connected via SPI.
+endef
+
+$(eval $(call KernelPackage,bmp085-spi))
-- 
2.8.3