[LEDE-DEV] [OpenWrt-Devel] latency on PPPoA ADSL Annex A on using Lantiq

Daniel Niasoff daniel at redactus.co.uk
Thu Aug 4 12:10:48 PDT 2016


Hi Donald,

Thanks for responding

The MTU seems fine.

This is the WAN link

pppoa-wan Link encap:Point-to-Point Protocol
          inet addr:2.25.173.155  P-t-P:172.16.11.136  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:94409 errors:0 dropped:0 overruns:0 frame:0
          TX packets:85742 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:75750172 (72.2 MiB)  TX bytes:14369708 (13.7 MiB)

I sent a 1492 byte icmp request externally which got through.

root at ubuntu:~# ping -s 1464 2.25.173.155
PING 2.25.173.155 (2.25.173.155) 1464(1492) bytes of data.
1472 bytes from 2.25.173.155: icmp_seq=1 ttl=57 time=49.4 ms
^C
--- 2.25.173.155 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 49.439/49.439/49.439/0.000 ms

So MTU looks fine.

Thanks

Daniel

From: Donald Chisholm [mailto:donald.chisholm at gmail.com] 
Sent: 04 August 2016 19:41
To: Daniel Niasoff <daniel at redactus.co.uk>
Subject: Re: [OpenWrt-Devel] latency on PPPoA ADSL Annex A on using Lantiq

Hi Daniel,

I just saw your message on the LEDE mailing list.  The freezing and catching up sounds like a MTU problem.  Could there be a MTU mismatch on the ADSL interface (1500 <->1492)?

Donald

On Thu, Aug 4, 2016 at 6:47 AM, Daniel Niasoff <mailto:daniel at redactus.co.uk> wrote:
Hi,

I am quite desperate because I have a project going with these routers and I am running really late.

Can anyone spare some time to help me, I am willing to pay an hourly rate for the time if it will help.

This issue only occurs on ADSL. On VDSL performance is really good even using PPPoE.

The issue is a sluggish access to the CPU interface via ADSL, so for example if you are typing in a SSH client, it will keep freezing for a second or two, than catch up.

Routed traffic is fine.

Thanks

Daniel

-----Original Message-----
From: Martin Blumenstingl [mailto:mailto:martin.blumenstingl at googlemail.com]
Sent: 03 August 2016 08:03
To: Alexander Couzens <mailto:lynxis at fe80.eu>
Cc: Daniel Niasoff <mailto:daniel at redactus.co.uk>; mailto:openwrt-devel at lists.openwrt.org; mailto:lede-dev at lists.infradead.org; mailto:hauke at hauke-m.de; mailto:john at phrozen.org
Subject: Re: [OpenWrt-Devel] latency on PPPoA ADSL Annex A on using Lantiq

On Tue, Aug 2, 2016 at 6:10 PM, Alexander Couzens <mailto:lynxis at fe80.eu> wrote:
> On Tue, 2 Aug 2016 13:38:55 +0000
> Daniel Niasoff <mailto:daniel at redactus.co.uk> wrote:
>
>> I can provide remote ssh access if required. When using SSH you will
>> notice it feels sluggish due to this issue.
>>
>> Any ideas pleeeease, I am really stuck here?
>
> I can confirm your problem with PPPoE on ADSL. Also noticed high
> latency on ssh connection through the router.
> I guess it's not in the DSL part, because when using the TD8970 as
> modem with pass through everything is fine.
someone else did performance/throughput testing on the HH5A, the results are posted here: [0]

I did not have time to look into this yet, but maybe Hauke or John have an idea what's going on.


[0] http://openwrt.ebilan.co.uk/viewtopic.php?f=7&p=1189
_______________________________________________
openwrt-devel mailing list
mailto:openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the Lede-dev mailing list