[openwrt/openwrt] rockchip: show boot stages on nanopi R6 system LED

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch openwrt-24.10:
https://git.openwrt.org/ec231bf564f33ac7cac975e5f262b252fb2a89cc

commit ec231bf564f33ac7cac975e5f262b252fb2a89cc
Author: Michel Lespinasse <michel at lespinasse.org>
AuthorDate: Thu Jan 16 00:50:01 2025 -0800

    rockchip: show boot stages on nanopi R6 system LED
    
    Set up openwrt to show boot progress on the nanopi R6S or R6C system LED.
    
    The LED blinking states indicate the boot stage. The LED is defined as
    a power LED, but can still be set to heartbeat in /etc/config/system
    after the system is done booting.
    
    Signed-off-by: Michel Lespinasse <michel at lespinasse.org>
    Link: https://github.com/openwrt/openwrt/pull/17638
    (cherry picked from commit de9ad11dac094b6074c9b23341acbc28806404ae)
    Link: https://github.com/openwrt/openwrt/pull/18347
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 .../401-1-nanopi-r6-show-boot-status-on-system-led | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/target/linux/rockchip/patches-6.6/401-1-nanopi-r6-show-boot-status-on-system-led b/target/linux/rockchip/patches-6.6/401-1-nanopi-r6-show-boot-status-on-system-led
new file mode 100644
index 0000000000..f891cf5f16
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/401-1-nanopi-r6-show-boot-status-on-system-led
@@ -0,0 +1,33 @@
+Nanopi R6: show boot progress on the system LED
+
+Set up openwrt to show boot progress on the nanopi R6S or R6C system LED.
+
+The LED blinking states indicate the boot stage. The led is defined as
+a power LED, but can still be set to heartbeat in /etc/config/system
+after the system is done booting.
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+@@ -16,6 +16,10 @@
+ 		ethernet0 = &gmac1;
+ 		mmc0 = &sdmmc;
+ 		mmc1 = &sdhci;
++		led-boot = &sys_led;
++		led-failsafe = &sys_led;
++		led-running = &sys_led;
++		led-upgrade = &sys_led;
+ 	};
+ 
+ 	chosen {
+@@ -54,9 +58,9 @@
+ 
+ 		sys_led: led-0 {
+ 			color = <LED_COLOR_ID_RED>;
+-			function = LED_FUNCTION_HEARTBEAT;
++			function = LED_FUNCTION_POWER;
+ 			gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+-			linux,default-trigger = "heartbeat";
++			default-state = "on";
+ 			pinctrl-names = "default";
+ 			pinctrl-0 = <&sys_led_pin>;
+ 		};