[openwrt/openwrt] rockchip: configure reset button on nanopi R6

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/2e7d060fd1ba6160067df1a2ba303c7c2efe2a7e

commit 2e7d060fd1ba6160067df1a2ba303c7c2efe2a7e
Author: Michel Lespinasse <michel at lespinasse.org>
AuthorDate: Thu Jan 16 00:50:23 2025 -0800

    rockchip: configure reset button on nanopi R6
    
    Set up openwrt to handle the reset button appropriately (so that it
    can trigger the various recovery modes) on the nanopi R6S and R6C models.
    
    Signed-off-by: Michel Lespinasse <michel at lespinasse.org>
    Link: https://github.com/openwrt/openwrt/pull/17638
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 .../rockchip/patches-6.6/401-2-nanopi-r6-reset-button  | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/target/linux/rockchip/patches-6.6/401-2-nanopi-r6-reset-button b/target/linux/rockchip/patches-6.6/401-2-nanopi-r6-reset-button
new file mode 100644
index 0000000000..5ca4aff115
--- /dev/null
+++ b/target/linux/rockchip/patches-6.6/401-2-nanopi-r6-reset-button
@@ -0,0 +1,18 @@
+Nanopi R6: set up reset button to be handled by openwrt
+
+Set up openwrt to handle the reset button appropriately (so that it
+can trigger the various recovery modes) on the nanopi R6S and R6C models.
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+@@ -48,8 +48,8 @@
+ 		button-user {
+ 			debounce-interval = <50>;
+ 			gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
+-			label = "User Button";
+-			linux,code = <BTN_1>;
++			label = "reset";
++			linux,code = <KEY_RESTART>;
+ 		};
+ 	};
+