[openwrt/openwrt] at91: add USB kmods only for subtargets that support USB

[LEDE Commits]

robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/02d3aa72bb72af1a9405bc3fef977e48d20157a5

commit 02d3aa72bb72af1a9405bc3fef977e48d20157a5
Author: Robert Marko <robimarko at gmail.com>
AuthorDate: Fri Apr 4 11:04:01 2025 +0200

    at91: add USB kmods only for subtargets that support USB
    
    Currently, kmod-usb-ohci,kmod-at91-udc and kmod-usb-gadget-eth are included
    as the default packages for all at91 subtargets.
    
    However, this is breaking image builder as kmod-at91-udc is not being built
    on sama7 since it depends on USB_SUPPORT and sama7 does not have USB support
    enabled in the kernel as its not supported upstream so its not even
    selectable in the config.
    
    So, move to include these as default packages only for sama5 and sama9x as
    both of those have USB support enabled.
    
    Fixes: #18407
    Link: https://github.com/openwrt/openwrt/pull/18413
    Signed-off-by: Robert Marko <robimarko at gmail.com>
---
 target/linux/at91/Makefile        | 2 --
 target/linux/at91/sam9x/target.mk | 2 ++
 target/linux/at91/sama5/target.mk | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile
index 8fd4a01834..752ac4c398 100644
--- a/target/linux/at91/Makefile
+++ b/target/linux/at91/Makefile
@@ -16,6 +16,4 @@ include $(INCLUDE_DIR)/target.mk
 
 KERNELNAME:=zImage dtbs
 
-DEFAULT_PACKAGES += kmod-usb-ohci kmod-at91-udc kmod-usb-gadget-eth
-
 $(eval $(call BuildTarget))
diff --git a/target/linux/at91/sam9x/target.mk b/target/linux/at91/sam9x/target.mk
index f6da7c003c..70f4a2e7e3 100644
--- a/target/linux/at91/sam9x/target.mk
+++ b/target/linux/at91/sam9x/target.mk
@@ -1,6 +1,8 @@
 BOARDNAME:= SAM9X Boards (ARMv5)
 CPU_TYPE:=arm926ej-s
 
+DEFAULT_PACKAGES += kmod-usb-ohci kmod-at91-udc kmod-usb-gadget-eth
+
 define Target/Description
 	Build generic firmware for Microchip AT91 SAM9x platforms
 	using the ARMv5 instruction set.
diff --git a/target/linux/at91/sama5/target.mk b/target/linux/at91/sama5/target.mk
index 35df05b70d..c2c3464e49 100644
--- a/target/linux/at91/sama5/target.mk
+++ b/target/linux/at91/sama5/target.mk
@@ -2,7 +2,7 @@ BOARDNAME:=SAMA5 boards(Cortex-A5)
 CPU_TYPE:=cortex-a5
 CPU_SUBTYPE:=vfpv4
 FEATURES+=fpu
-DEFAULT_PACKAGES += kmod-usb2
+DEFAULT_PACKAGES += kmod-usb2 kmod-usb-ohci kmod-at91-udc kmod-usb-gadget-eth
 
 define Target/Description
 	Build generic firmware for Microchip(Atmel AT91) SAMA5D2,