[openwrt/openwrt] bmips: add support for Actiontec T1200H
LEDE Commits
lede-commits at lists.infradead.org
Wed Apr 2 22:59:55 PDT 2025
noltari pushed a commit to openwrt/openwrt.git, branch openwrt-24.10:
https://git.openwrt.org/f31675b69b7565145ae6a14029ce99933bf75558
commit f31675b69b7565145ae6a14029ce99933bf75558
Author: Kyle Hendry <kylehendrydev at gmail.com>
AuthorDate: Sat Jan 11 11:33:22 2025 -0800
bmips: add support for Actiontec T1200H
Specifications:
- SoC: Broadcom BCM63168 dual 400MHz MIPS
- Flash: 128MB NAND ESMT F59L1G81A
- RAM: 128MB DDR3
- Ethernet: 5x 1000M
- Wifi: BCM435F
- 1x USB 2.0 port
- 2x Button
- 11x LED
- Coax HPNA (unsupported)
- RJ11 xDSL (unsupported)
Install instructions:
The booloader will only install signed firmware so the image has to
be manually flashed.
- Set up a TFTP server on 192.168.1.0/24 to serve the initramfs image
- Interrupt the bootloader and run from RAM with
r 192.168.1.100:openwrt-bmips-bcm63268-actiontec_t1200h-initramfs.elf
- On the openwrt console, copy the wfi image using wget/tftp/scp, i.e
scp user at 192.168.1.100:~/openwrt/bin/targets/bmips/bcm63268/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin /tmp/
- Erase half the flash partition where openwrt will be installed with
flash_erase -j /dev/mtd1 0 491
- Flash the openwrt image with
nandwrite -p /dev/mtd1 /tmp/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin
- Reboot
- Interrupt the bootloader again and use the c command to boot from
previous firmware if vendor image is loaded
Signed-off-by: Kyle Hendry <kylehendrydev at gmail.com>
[Minor improvements to DTS file]
Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
(cherry picked from commit 65b8a978deac05894d1fd20dfe63494f4b43848d)
---
.../bcm63268/base-files/etc/board.d/02_network | 13 +-
.../bcm63268/base-files/lib/upgrade/platform.sh | 1 +
.../linux/bmips/dts/bcm63168-actiontec-t1200h.dts | 253 +++++++++++++++++++++
target/linux/bmips/image/bcm63268.mk | 19 ++
4 files changed, 280 insertions(+), 6 deletions(-)
diff --git a/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network b/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network
index 328fb13df4..70e5db0522 100644
--- a/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network
+++ b/target/linux/bmips/bcm63268/base-files/etc/board.d/02_network
@@ -5,6 +5,13 @@
board_config_update
case "$(board_name)" in
+actiontec,t1200h |\
+comtrend,vg-8050 |\
+sagem,fast-3864-op |\
+sercomm,shg2500)
+ ucidef_set_bridge_device switch
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+ ;;
comtrend,vr-3032u |\
smartrg,sr505n)
ucidef_set_bridge_device switch
@@ -17,12 +24,6 @@ sercomm,h500-s-vfes)
ucidef_set_interface "qtn" device "wifi" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.252"
uci add_list firewall. at zone[0].network='qtn'
;;
-comtrend,vg-8050 |\
-sagem,fast-3864-op |\
-sercomm,shg2500)
- ucidef_set_bridge_device switch
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
- ;;
esac
board_config_flush
diff --git a/target/linux/bmips/bcm63268/base-files/lib/upgrade/platform.sh b/target/linux/bmips/bcm63268/base-files/lib/upgrade/platform.sh
index 00b23f742f..b41b5e9140 100644
--- a/target/linux/bmips/bcm63268/base-files/lib/upgrade/platform.sh
+++ b/target/linux/bmips/bcm63268/base-files/lib/upgrade/platform.sh
@@ -9,6 +9,7 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
+ actiontec,t1200h |\
comtrend,vg-8050 |\
comtrend,vr-3032u |\
sagem,fast-3864-op)
diff --git a/target/linux/bmips/dts/bcm63168-actiontec-t1200h.dts b/target/linux/bmips/dts/bcm63168-actiontec-t1200h.dts
new file mode 100644
index 0000000000..86fce53a79
--- /dev/null
+++ b/target/linux/bmips/dts/bcm63168-actiontec-t1200h.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm63268.dtsi"
+
+/ {
+ model = "Actiontec T1200H";
+ compatible = "actiontec,t1200h", "brcm,bcm63168", "brcm,bcm63268";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "red:internet";
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ label = "green:internet";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: led-20 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ led-22 {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: led-35 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+
+ led-39 {
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ };
+
+ led-43 {
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+ };
+
+ led-44 {
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ led-46 {
+ label = "green:dsl";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ };
+
+ led-49 {
+ label = "red:dsl";
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio 49 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_cferom_6a0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio_ext {
+ switch at 1e {
+ compatible = "brcm,bcm53125";
+ reg = <0x1e>;
+
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port at 8 {
+ reg = <0x8>;
+
+ phy-mode = "rgmii";
+ ethernet = <&switch0port6>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&nflash {
+ status = "okay";
+
+ nandcs at 0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <15>;
+ nand-on-flash-bbt;
+ brcm,nand-oob-sector-size = <64>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "cferom";
+ reg = <0x0 0x20000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_cferom_6a0: macaddr at 6a0 {
+ reg = <0x6a0 0x6>;
+ };
+ };
+ };
+
+ partition at 20000 {
+ compatible = "brcm,wfi-split";
+ label = "wfi";
+ reg = <0x20000 0x7ac0000>;
+ };
+
+ partition at 7b00000 {
+ label = "data";
+ reg = <0x7b00000 0x400000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&switch0 {
+ dsa,member = <0 0>;
+
+ ports {
+ port at 3 {
+ reg = <3>;
+ label = "wan";
+
+ phy-handle = <&phy4>;
+ };
+
+ switch0port6: port at 6 {
+ reg = <6>;
+ label = "extsw";
+
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usbh {
+ status = "okay";
+};
diff --git a/target/linux/bmips/image/bcm63268.mk b/target/linux/bmips/image/bcm63268.mk
index ed45bead7f..3f98acc56f 100644
--- a/target/linux/bmips/image/bcm63268.mk
+++ b/target/linux/bmips/image/bcm63268.mk
@@ -1,5 +1,24 @@
# SPDX-License-Identifier: GPL-2.0-or-later
+define Device/actiontec_t1200h
+ $(Device/bcm63xx-nand)
+ DEVICE_VENDOR := Actiontec
+ DEVICE_MODEL := T1200H
+ CHIP_ID := 63268
+ SOC := bcm63168
+ CFE_RAM_FILE := actiontec,t1200h/cferam.000
+ CFE_RAM_JFFS2_NAME := cferam.000
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+ DEVICE_PACKAGES += $(USB2_PACKAGES) \
+ kmod-leds-gpio
+ CFE_WFI_FLASH_TYPE := 3
+ CFE_WFI_VERSION := 0x5732
+endef
+TARGET_DEVICES += actiontec_t1200h
+
define Device/comtrend_vg-8050
$(Device/bcm63xx-nand)
DEVICE_VENDOR := Comtrend
More information about the lede-commits
mailing list