[openwrt/openwrt] armsr: remove left-over patches for kernel 6.1
LEDE Commits
lede-commits at lists.infradead.org
Fri Sep 20 10:58:11 PDT 2024
dangole pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/e6da78d193a4ddfc0f61f336c980ed08bd9faa23
commit e6da78d193a4ddfc0f61f336c980ed08bd9faa23
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Fri Sep 20 18:48:01 2024 +0100
armsr: remove left-over patches for kernel 6.1
Support for Linux 6.1 has already been removed from the armsr target.
Remove left-over patches-6.1 folder as well.
Fixes: fd47fdf527 ("armsr: Remove kernel 6.1 configuration")
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
.../221-armsr-disable_gc_sections_armv7.patch | 23 --
...t-dpaa2-eth-don-t-use-ENOTSUPP-error-code.patch | 44 ---
...eplace-dpaa2_mac_is_type_fixed-with-dpaa2.patch | 99 -------
...ac-absorb-phylink_start-call-into-dpaa2_m.patch | 88 ------
...ac-remove-defensive-check-in-dpaa2_mac_di.patch | 50 ----
...th-assign-priv-mac-after-dpaa2_mac_connec.patch | 101 -------
...witch-assign-port_priv-mac-after-dpaa2_ma.patch | 73 -----
...ublish-MAC-stringset-to-ethtool-S-even-if.patch | 111 -------
...witch-replace-direct-MAC-access-with-dpaa.patch | 28 --
...th-connect-to-MAC-before-requesting-the-e.patch | 93 ------
...th-serialize-changes-to-priv-mac-with-a-m.patch | 320 ---------------------
...switch-serialize-changes-to-priv-mac-with.patch | 203 -------------
...a2-mac-move-rtnl_lock-only-around-phylink.patch | 113 --------
13 files changed, 1346 deletions(-)
diff --git a/target/linux/armsr/patches-6.1/221-armsr-disable_gc_sections_armv7.patch b/target/linux/armsr/patches-6.1/221-armsr-disable_gc_sections_armv7.patch
deleted file mode 100644
index 7c0b4b1920..0000000000
--- a/target/linux/armsr/patches-6.1/221-armsr-disable_gc_sections_armv7.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From b77c0ecdc7915e5c5c515da1aa6cfaf6f4eb8351 Mon Sep 17 00:00:00 2001
-From: Mathew McBride <matt at traverse.com.au>
-Date: Wed, 28 Sep 2022 16:39:31 +1000
-Subject: [PATCH] arm: disable code size reduction measures
- (gc-sections,-f*-sections)
-
-This interferes with the EFI boot stub on armv7l.
-
-Signed-off-by: Mathew McBride <matt at traverse.com.au>
----
- arch/arm/Kconfig | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -124,7 +124,6 @@ config ARM
- select HAVE_VIRT_CPU_ACCOUNTING_GEN
- select IRQ_FORCED_THREADING
- select LOCK_MM_AND_FIND_VMA
-- select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- select MODULES_USE_ELF_REL
- select NEED_DMA_MAP_STATE
- select OF_EARLY_FLATTREE if OF
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0001-net-dpaa2-eth-don-t-use-ENOTSUPP-error-code.patch b/target/linux/armsr/patches-6.1/701-v6.2-0001-net-dpaa2-eth-don-t-use-ENOTSUPP-error-code.patch
deleted file mode 100644
index f173cad7ef..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0001-net-dpaa2-eth-don-t-use-ENOTSUPP-error-code.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From f3763a0c1b07273218cbf5886bdf8df9df501111 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:10 +0200
-Subject: [PATCH 03/14] net: dpaa2-eth: don't use -ENOTSUPP error code
-
-dpaa2_eth_setup_dpni() is called from the probe path and
-dpaa2_eth_set_link_ksettings() is propagated to user space.
-
-include/linux/errno.h says that ENOTSUPP is "Defined for the NFSv3
-protocol". Conventional wisdom has it to not use it in networking
-drivers. Replace it with -EOPNOTSUPP.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 +-
- drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -3618,7 +3618,7 @@ static int dpaa2_eth_setup_dpni(struct f
- dev_err(dev, "DPNI version %u.%u not supported, need >= %u.%u\n",
- priv->dpni_ver_major, priv->dpni_ver_minor,
- DPNI_VER_MAJOR, DPNI_VER_MINOR);
-- err = -ENOTSUPP;
-+ err = -EOPNOTSUPP;
- goto close;
- }
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -118,7 +118,7 @@ dpaa2_eth_set_link_ksettings(struct net_
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-
- if (!dpaa2_eth_is_type_phy(priv))
-- return -ENOTSUPP;
-+ return -EOPNOTSUPP;
-
- return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings);
- }
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0002-net-dpaa2-replace-dpaa2_mac_is_type_fixed-with-dpaa2.patch b/target/linux/armsr/patches-6.1/701-v6.2-0002-net-dpaa2-replace-dpaa2_mac_is_type_fixed-with-dpaa2.patch
deleted file mode 100644
index 501eaf42ff..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0002-net-dpaa2-replace-dpaa2_mac_is_type_fixed-with-dpaa2.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 022a11062261dc4703da846d3bf4d194ef6bebf5 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:11 +0200
-Subject: [PATCH 04/14] net: dpaa2: replace dpaa2_mac_is_type_fixed() with
- dpaa2_mac_is_type_phy()
-
-dpaa2_mac_is_type_fixed() is a header with no implementation and no
-callers, which is referenced from the documentation though. It can be
-deleted.
-
-On the other hand, it would be useful to reuse the code between
-dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common
-code should be called dpaa2_mac_is_type_phy(), so let's create that.
-
-The removal and the addition are merged into the same patch because,
-in fact, is_type_phy() is the logical opposite of is_type_fixed().
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- .../ethernet/freescale/dpaa2/mac-phy-support.rst | 9 ++++++---
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 7 +------
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h | 10 ++++++++--
- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h | 7 +------
- 4 files changed, 16 insertions(+), 17 deletions(-)
-
---- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
-+++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
-@@ -181,10 +181,13 @@ when necessary using the below listed AP
- - int dpaa2_mac_connect(struct dpaa2_mac *mac);
- - void dpaa2_mac_disconnect(struct dpaa2_mac *mac);
-
--A phylink integration is necessary only when the partner DPMAC is not of TYPE_FIXED.
--One can check for this condition using the below API::
-+A phylink integration is necessary only when the partner DPMAC is not of
-+``TYPE_FIXED``. This means it is either of ``TYPE_PHY``, or of
-+``TYPE_BACKPLANE`` (the difference being the two that in the ``TYPE_BACKPLANE``
-+mode, the MC firmware does not access the PCS registers). One can check for
-+this condition using the following helper::
-
-- - bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,struct fsl_mc_io *mc_io);
-+ - static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac);
-
- Before connection to a MAC, the caller must allocate and populate the
- dpaa2_mac structure with the associated net_device, a pointer to the MC portal
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -733,12 +733,7 @@ static inline unsigned int dpaa2_eth_rx_
-
- static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
- {
-- if (priv->mac &&
-- (priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
-- priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
-- return true;
--
-- return false;
-+ return dpaa2_mac_is_type_phy(priv->mac);
- }
-
- static inline bool dpaa2_eth_has_mac(struct dpaa2_eth_priv *priv)
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
-@@ -30,8 +30,14 @@ struct dpaa2_mac {
- struct phy *serdes_phy;
- };
-
--bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,
-- struct fsl_mc_io *mc_io);
-+static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac)
-+{
-+ if (!mac)
-+ return false;
-+
-+ return mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
-+ mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE;
-+}
-
- int dpaa2_mac_open(struct dpaa2_mac *mac);
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
-@@ -230,12 +230,7 @@ static inline bool dpaa2_switch_supports
- static inline bool
- dpaa2_switch_port_is_type_phy(struct ethsw_port_priv *port_priv)
- {
-- if (port_priv->mac &&
-- (port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
-- port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
-- return true;
--
-- return false;
-+ return dpaa2_mac_is_type_phy(port_priv->mac);
- }
-
- static inline bool dpaa2_switch_port_has_mac(struct ethsw_port_priv *port_priv)
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0003-net-dpaa2-mac-absorb-phylink_start-call-into-dpaa2_m.patch b/target/linux/armsr/patches-6.1/701-v6.2-0003-net-dpaa2-mac-absorb-phylink_start-call-into-dpaa2_m.patch
deleted file mode 100644
index af5ff2aea6..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0003-net-dpaa2-mac-absorb-phylink_start-call-into-dpaa2_m.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From 97c07369ab8bf9895e05d4b468f18e6567263154 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:12 +0200
-Subject: [PATCH 05/14] net: dpaa2-mac: absorb phylink_start() call into
- dpaa2_mac_start()
-
-The phylink handling is intended to be hidden inside the dpaa2_mac
-object. Move the phylink_start() call into dpaa2_mac_start(), and
-phylink_stop() into dpaa2_mac_stop().
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 5 +----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 8 ++++++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 5 +----
- 3 files changed, 10 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -2083,10 +2083,8 @@ static int dpaa2_eth_open(struct net_dev
- goto enable_err;
- }
-
-- if (dpaa2_eth_is_type_phy(priv)) {
-+ if (dpaa2_eth_is_type_phy(priv))
- dpaa2_mac_start(priv->mac);
-- phylink_start(priv->mac->phylink);
-- }
-
- return 0;
-
-@@ -2160,7 +2158,6 @@ static int dpaa2_eth_stop(struct net_dev
- int retries = 10;
-
- if (dpaa2_eth_is_type_phy(priv)) {
-- phylink_stop(priv->mac->phylink);
- dpaa2_mac_stop(priv->mac);
- } else {
- netif_tx_stop_all_queues(net_dev);
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -336,12 +336,20 @@ static void dpaa2_mac_set_supported_inte
-
- void dpaa2_mac_start(struct dpaa2_mac *mac)
- {
-+ ASSERT_RTNL();
-+
- if (mac->serdes_phy)
- phy_power_on(mac->serdes_phy);
-+
-+ phylink_start(mac->phylink);
- }
-
- void dpaa2_mac_stop(struct dpaa2_mac *mac)
- {
-+ ASSERT_RTNL();
-+
-+ phylink_stop(mac->phylink);
-+
- if (mac->serdes_phy)
- phy_power_off(mac->serdes_phy);
- }
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-@@ -703,10 +703,8 @@ static int dpaa2_switch_port_open(struct
-
- dpaa2_switch_enable_ctrl_if_napi(ethsw);
-
-- if (dpaa2_switch_port_is_type_phy(port_priv)) {
-+ if (dpaa2_switch_port_is_type_phy(port_priv))
- dpaa2_mac_start(port_priv->mac);
-- phylink_start(port_priv->mac->phylink);
-- }
-
- return 0;
- }
-@@ -718,7 +716,6 @@ static int dpaa2_switch_port_stop(struct
- int err;
-
- if (dpaa2_switch_port_is_type_phy(port_priv)) {
-- phylink_stop(port_priv->mac->phylink);
- dpaa2_mac_stop(port_priv->mac);
- } else {
- netif_tx_stop_all_queues(netdev);
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0004-net-dpaa2-mac-remove-defensive-check-in-dpaa2_mac_di.patch b/target/linux/armsr/patches-6.1/701-v6.2-0004-net-dpaa2-mac-remove-defensive-check-in-dpaa2_mac_di.patch
deleted file mode 100644
index c3028357fe..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0004-net-dpaa2-mac-remove-defensive-check-in-dpaa2_mac_di.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 095ef388f714d622aa503fcccf20dc4095b72762 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:13 +0200
-Subject: [PATCH 06/14] net: dpaa2-mac: remove defensive check in
- dpaa2_mac_disconnect()
-
-dpaa2_mac_disconnect() will only be called with a NULL mac->phylink if
-dpaa2_mac_connect() failed, or was never called.
-
-The callers are these:
-
-dpaa2_eth_disconnect_mac():
-
- if (dpaa2_eth_is_type_phy(priv))
- dpaa2_mac_disconnect(priv->mac);
-
-dpaa2_switch_port_disconnect_mac():
-
- if (dpaa2_switch_port_is_type_phy(port_priv))
- dpaa2_mac_disconnect(port_priv->mac);
-
-priv->mac can be NULL, but in that case, dpaa2_eth_is_type_phy() returns
-false, and dpaa2_mac_disconnect() is never called. Similar for
-dpaa2-switch.
-
-When priv->mac is non-NULL, it means that dpaa2_mac_connect() returned
-zero (success), and therefore, priv->mac->phylink is also a valid
-pointer.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -446,9 +446,6 @@ err_pcs_destroy:
-
- void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
- {
-- if (!mac->phylink)
-- return;
--
- phylink_disconnect_phy(mac->phylink);
- phylink_destroy(mac->phylink);
- dpaa2_pcs_destroy(mac);
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0005-net-dpaa2-eth-assign-priv-mac-after-dpaa2_mac_connec.patch b/target/linux/armsr/patches-6.1/701-v6.2-0005-net-dpaa2-eth-assign-priv-mac-after-dpaa2_mac_connec.patch
deleted file mode 100644
index bd27c8be20..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0005-net-dpaa2-eth-assign-priv-mac-after-dpaa2_mac_connec.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 06efc9b8a1360cad83cae6e71558e5458cc1fbf3 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:14 +0200
-Subject: [PATCH 07/14] net: dpaa2-eth: assign priv->mac after
- dpaa2_mac_connect() call
-
-There are 2 requirements for correct code:
-
-- Any time the driver accesses the priv->mac pointer at runtime, it
- either holds NULL to indicate a DPNI-DPNI connection (or unconnected
- DPNI), or a struct dpaa2_mac whose phylink instance was fully
- initialized (created and connected to the PHY). No changes are made to
- priv->mac while it is being used. Currently, rtnl_lock() watches over
- the call to dpaa2_eth_connect_mac(), so it serves the purpose of
- serializing this with all readers of priv->mac.
-
-- dpaa2_mac_connect() should run unlocked, because inside it are 2
- phylink calls with incompatible locking requirements: phylink_create()
- requires that the rtnl_mutex isn't held, and phylink_fwnode_phy_connect()
- requires that the rtnl_mutex is held. The only way to solve those
- contradictory requirements is to let dpaa2_mac_connect() take
- rtnl_lock() when it needs to.
-
-To solve both requirements, we need to identify the writer side of the
-priv->mac pointer, which can be wrapped in a mutex private to the driver
-in a future patch. The dpaa2_mac_connect() cannot be part of the writer
-side critical section, because of an AB/BA deadlock with rtnl_lock().
-
-So the strategy needs to be that where we prepare the DPMAC by calling
-dpaa2_mac_connect(), and only make priv->mac point to it once it's fully
-prepared. This ensures that the writer side critical section has the
-absolute minimum surface it can.
-
-The reverse strategy is adopted in the dpaa2_eth_disconnect_mac() code
-path. This makes sure that priv->mac is NULL when we start tearing down
-the DPMAC that we disconnected from, and concurrent code will simply not
-see it.
-
-No locking changes in this patch (concurrent code is still blocked by
-the rtnl_mutex).
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 21 +++++++++++--------
- 1 file changed, 12 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -4448,9 +4448,8 @@ static int dpaa2_eth_connect_mac(struct
- err = dpaa2_mac_open(mac);
- if (err)
- goto err_free_mac;
-- priv->mac = mac;
-
-- if (dpaa2_eth_is_type_phy(priv)) {
-+ if (dpaa2_mac_is_type_phy(mac)) {
- err = dpaa2_mac_connect(mac);
- if (err && err != -EPROBE_DEFER)
- netdev_err(priv->net_dev, "Error connecting to the MAC endpoint: %pe",
-@@ -4459,11 +4458,12 @@ static int dpaa2_eth_connect_mac(struct
- goto err_close_mac;
- }
-
-+ priv->mac = mac;
-+
- return 0;
-
- err_close_mac:
- dpaa2_mac_close(mac);
-- priv->mac = NULL;
- err_free_mac:
- kfree(mac);
- return err;
-@@ -4471,15 +4471,18 @@ err_free_mac:
-
- static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv)
- {
-- if (dpaa2_eth_is_type_phy(priv))
-- dpaa2_mac_disconnect(priv->mac);
-+ struct dpaa2_mac *mac = priv->mac;
-+
-+ priv->mac = NULL;
-
-- if (!dpaa2_eth_has_mac(priv))
-+ if (!mac)
- return;
-
-- dpaa2_mac_close(priv->mac);
-- kfree(priv->mac);
-- priv->mac = NULL;
-+ if (dpaa2_mac_is_type_phy(mac))
-+ dpaa2_mac_disconnect(mac);
-+
-+ dpaa2_mac_close(mac);
-+ kfree(mac);
- }
-
- static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg)
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0006-net-dpaa2-switch-assign-port_priv-mac-after-dpaa2_ma.patch b/target/linux/armsr/patches-6.1/701-v6.2-0006-net-dpaa2-switch-assign-port_priv-mac-after-dpaa2_ma.patch
deleted file mode 100644
index e63654984a..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0006-net-dpaa2-switch-assign-port_priv-mac-after-dpaa2_ma.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From a5e7f7e277bd4403c45c1c7922d56d0eb08dbc7c Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:15 +0200
-Subject: [PATCH 08/14] net: dpaa2-switch: assign port_priv->mac after
- dpaa2_mac_connect() call
-
-The dpaa2-switch has the exact same locking requirements when connected
-to a DPMAC, so it needs port_priv->mac to always point either to NULL,
-or to a DPMAC with a fully initialized phylink instance.
-
-Make the same preparatory change in the dpaa2-switch driver as in the
-dpaa2-eth one.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- .../ethernet/freescale/dpaa2/dpaa2-switch.c | 21 +++++++++++--------
- 1 file changed, 12 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-@@ -1450,9 +1450,8 @@ static int dpaa2_switch_port_connect_mac
- err = dpaa2_mac_open(mac);
- if (err)
- goto err_free_mac;
-- port_priv->mac = mac;
-
-- if (dpaa2_switch_port_is_type_phy(port_priv)) {
-+ if (dpaa2_mac_is_type_phy(mac)) {
- err = dpaa2_mac_connect(mac);
- if (err) {
- netdev_err(port_priv->netdev,
-@@ -1462,11 +1461,12 @@ static int dpaa2_switch_port_connect_mac
- }
- }
-
-+ port_priv->mac = mac;
-+
- return 0;
-
- err_close_mac:
- dpaa2_mac_close(mac);
-- port_priv->mac = NULL;
- err_free_mac:
- kfree(mac);
- return err;
-@@ -1474,15 +1474,18 @@ err_free_mac:
-
- static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv)
- {
-- if (dpaa2_switch_port_is_type_phy(port_priv))
-- dpaa2_mac_disconnect(port_priv->mac);
-+ struct dpaa2_mac *mac = port_priv->mac;
-+
-+ port_priv->mac = NULL;
-
-- if (!dpaa2_switch_port_has_mac(port_priv))
-+ if (!mac)
- return;
-
-- dpaa2_mac_close(port_priv->mac);
-- kfree(port_priv->mac);
-- port_priv->mac = NULL;
-+ if (dpaa2_mac_is_type_phy(mac))
-+ dpaa2_mac_disconnect(mac);
-+
-+ dpaa2_mac_close(mac);
-+ kfree(mac);
- }
-
- static irqreturn_t dpaa2_switch_irq0_handler_thread(int irq_num, void *arg)
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0007-net-dpaa2-publish-MAC-stringset-to-ethtool-S-even-if.patch b/target/linux/armsr/patches-6.1/701-v6.2-0007-net-dpaa2-publish-MAC-stringset-to-ethtool-S-even-if.patch
deleted file mode 100644
index c790ba1bd5..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0007-net-dpaa2-publish-MAC-stringset-to-ethtool-S-even-if.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From ce44b6ed9ee65efa9b3025552c513842eabcab88 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:16 +0200
-Subject: [PATCH 09/14] net: dpaa2: publish MAC stringset to ethtool -S even if
- MAC is missing
-
-DPNIs and DPSW objects can connect and disconnect at runtime from DPMAC
-objects on the same fsl-mc bus. The DPMAC object also holds "ethtool -S"
-unstructured counters. Those counters are only shown for the entity
-owning the netdev (DPNI, DPSW) if it's connected to a DPMAC.
-
-The ethtool stringset code path is split into multiple callbacks, but
-currently, connecting and disconnecting the DPMAC takes the rtnl_lock().
-This blocks the entire ethtool code path from running, see
-ethnl_default_doit() -> rtnl_lock() -> ops->prepare_data() ->
-strset_prepare_data().
-
-This is going to be a problem if we are going to no longer require
-rtnl_lock() when connecting/disconnecting the DPMAC, because the DPMAC
-could appear between ops->get_sset_count() and ops->get_strings().
-If it appears out of the blue, we will provide a stringset into an array
-that was dimensioned thinking the DPMAC wouldn't be there => array
-accessed out of bounds.
-
-There isn't really a good way to work around that, and I don't want to
-put too much pressure on the ethtool framework by playing locking games.
-Just make the DPMAC counters be always available. They'll be zeroes if
-the DPNI or DPSW isn't connected to a DPMAC.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 12 +++---------
- .../ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c | 11 ++---------
- 2 files changed, 5 insertions(+), 18 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -186,7 +186,6 @@ static int dpaa2_eth_set_pauseparam(stru
- static void dpaa2_eth_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
- {
-- struct dpaa2_eth_priv *priv = netdev_priv(netdev);
- u8 *p = data;
- int i;
-
-@@ -200,22 +199,17 @@ static void dpaa2_eth_get_strings(struct
- strscpy(p, dpaa2_ethtool_extras[i], ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
-- if (dpaa2_eth_has_mac(priv))
-- dpaa2_mac_get_strings(p);
-+ dpaa2_mac_get_strings(p);
- break;
- }
- }
-
- static int dpaa2_eth_get_sset_count(struct net_device *net_dev, int sset)
- {
-- int num_ss_stats = DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS;
-- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
--
- switch (sset) {
- case ETH_SS_STATS: /* ethtool_get_stats(), ethtool_get_drvinfo() */
-- if (dpaa2_eth_has_mac(priv))
-- num_ss_stats += dpaa2_mac_get_sset_count();
-- return num_ss_stats;
-+ return DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS +
-+ dpaa2_mac_get_sset_count();
- default:
- return -EOPNOTSUPP;
- }
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-@@ -145,14 +145,9 @@ dpaa2_switch_set_link_ksettings(struct n
- static int
- dpaa2_switch_ethtool_get_sset_count(struct net_device *netdev, int sset)
- {
-- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
-- int num_ss_stats = DPAA2_SWITCH_NUM_COUNTERS;
--
- switch (sset) {
- case ETH_SS_STATS:
-- if (port_priv->mac)
-- num_ss_stats += dpaa2_mac_get_sset_count();
-- return num_ss_stats;
-+ return DPAA2_SWITCH_NUM_COUNTERS + dpaa2_mac_get_sset_count();
- default:
- return -EOPNOTSUPP;
- }
-@@ -161,7 +156,6 @@ dpaa2_switch_ethtool_get_sset_count(stru
- static void dpaa2_switch_ethtool_get_strings(struct net_device *netdev,
- u32 stringset, u8 *data)
- {
-- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
- u8 *p = data;
- int i;
-
-@@ -172,8 +166,7 @@ static void dpaa2_switch_ethtool_get_str
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
-- if (port_priv->mac)
-- dpaa2_mac_get_strings(p);
-+ dpaa2_mac_get_strings(p);
- break;
- }
- }
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0008-net-dpaa2-switch-replace-direct-MAC-access-with-dpaa.patch b/target/linux/armsr/patches-6.1/701-v6.2-0008-net-dpaa2-switch-replace-direct-MAC-access-with-dpaa.patch
deleted file mode 100644
index 0663bf6fb1..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0008-net-dpaa2-switch-replace-direct-MAC-access-with-dpaa.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From c838d9fd7e6ba9ddd6006bf0a296396266e9f121 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:17 +0200
-Subject: [PATCH 10/14] net: dpaa2-switch replace direct MAC access with
- dpaa2_switch_port_has_mac()
-
-The helper function will gain a lockdep annotation in a future patch.
-Make sure to benefit from it.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-@@ -189,7 +189,7 @@ static void dpaa2_switch_ethtool_get_sta
- dpaa2_switch_ethtool_counters[i].name, err);
- }
-
-- if (port_priv->mac)
-+ if (dpaa2_switch_port_has_mac(port_priv))
- dpaa2_mac_get_ethtool_stats(port_priv->mac, data + i);
- }
-
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0009-net-dpaa2-eth-connect-to-MAC-before-requesting-the-e.patch b/target/linux/armsr/patches-6.1/701-v6.2-0009-net-dpaa2-eth-connect-to-MAC-before-requesting-the-e.patch
deleted file mode 100644
index 246cd633ba..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0009-net-dpaa2-eth-connect-to-MAC-before-requesting-the-e.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From e0ea63162cb5f1ca7f844d6ef5fc4079448ee2d5 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:18 +0200
-Subject: [PATCH 11/14] net: dpaa2-eth: connect to MAC before requesting the
- "endpoint changed" IRQ
-
-dpaa2_eth_connect_mac() is called both from dpaa2_eth_probe() and from
-dpni_irq0_handler_thread().
-
-It could happen that the DPNI gets connected to a DPMAC on the fsl-mc
-bus exactly during probe, as soon as the "endpoint change" interrupt is
-requested in dpaa2_eth_setup_irqs(). This will cause the
-dpni_irq0_handler_thread() to register a phylink instance for that DPMAC.
-
-Then, the probing function will also try to register a phylink instance
-for the same DPMAC, operation which should fail (and this will fail the
-probing of the driver).
-
-Reorder dpaa2_eth_setup_irqs() and dpaa2_eth_connect_mac(), such that
-dpni_irq0_handler_thread() never races with the DPMAC-related portion of
-the probing path.
-
-Also reorder dpaa2_eth_disconnect_mac() to be in the mirror position of
-dpaa2_eth_connect_mac() in the teardown path.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -4715,6 +4715,10 @@ static int dpaa2_eth_probe(struct fsl_mc
- }
- #endif
-
-+ err = dpaa2_eth_connect_mac(priv);
-+ if (err)
-+ goto err_connect_mac;
-+
- err = dpaa2_eth_setup_irqs(dpni_dev);
- if (err) {
- netdev_warn(net_dev, "Failed to set link interrupt, fall back to polling\n");
-@@ -4727,10 +4731,6 @@ static int dpaa2_eth_probe(struct fsl_mc
- priv->do_link_poll = true;
- }
-
-- err = dpaa2_eth_connect_mac(priv);
-- if (err)
-- goto err_connect_mac;
--
- err = dpaa2_eth_dl_alloc(priv);
- if (err)
- goto err_dl_register;
-@@ -4766,13 +4766,13 @@ err_dl_port_add:
- err_dl_trap_register:
- dpaa2_eth_dl_free(priv);
- err_dl_register:
-- dpaa2_eth_disconnect_mac(priv);
--err_connect_mac:
- if (priv->do_link_poll)
- kthread_stop(priv->poll_thread);
- else
- fsl_mc_free_irqs(dpni_dev);
- err_poll_thread:
-+ dpaa2_eth_disconnect_mac(priv);
-+err_connect_mac:
- dpaa2_eth_free_rings(priv);
- err_alloc_rings:
- err_csum:
-@@ -4820,9 +4820,6 @@ static int dpaa2_eth_remove(struct fsl_m
- #endif
-
- unregister_netdev(net_dev);
-- rtnl_lock();
-- dpaa2_eth_disconnect_mac(priv);
-- rtnl_unlock();
-
- dpaa2_eth_dl_port_del(priv);
- dpaa2_eth_dl_traps_unregister(priv);
-@@ -4833,6 +4830,9 @@ static int dpaa2_eth_remove(struct fsl_m
- else
- fsl_mc_free_irqs(ls_dev);
-
-+ rtnl_lock();
-+ dpaa2_eth_disconnect_mac(priv);
-+ rtnl_unlock();
- dpaa2_eth_free_rings(priv);
- free_percpu(priv->fd);
- free_percpu(priv->sgt_cache);
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0010-net-dpaa2-eth-serialize-changes-to-priv-mac-with-a-m.patch b/target/linux/armsr/patches-6.1/701-v6.2-0010-net-dpaa2-eth-serialize-changes-to-priv-mac-with-a-m.patch
deleted file mode 100644
index 553870d8ec..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0010-net-dpaa2-eth-serialize-changes-to-priv-mac-with-a-m.patch
+++ /dev/null
@@ -1,320 +0,0 @@
-From 5e448a17dfa2e95166534df7f677a3694ef6187d Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:19 +0200
-Subject: [PATCH 12/14] net: dpaa2-eth: serialize changes to priv->mac with a
- mutex
-
-The dpaa2 architecture permits dynamic connections between objects on
-the fsl-mc bus, specifically between a DPNI object (represented by a
-struct net_device) and a DPMAC object (represented by a struct phylink).
-
-The DPNI driver is notified when those connections are created/broken
-through the dpni_irq0_handler_thread() method. To ensure that ethtool
-operations, as well as netdev up/down operations serialize with the
-connection/disconnection of the DPNI with a DPMAC,
-dpni_irq0_handler_thread() takes the rtnl_lock() to block those other
-operations from taking place.
-
-There is code called by dpaa2_mac_connect() which wants to acquire the
-rtnl_mutex once again, see phylink_create() -> phylink_register_sfp() ->
-sfp_bus_add_upstream() -> rtnl_lock(). So the strategy doesn't quite
-work out, even though it's fairly simple.
-
-Create a different strategy, where all code paths in the dpaa2-eth
-driver access priv->mac only while they are holding priv->mac_lock.
-The phylink instance is not created or connected to the PHY under the
-priv->mac_lock, but only assigned to priv->mac then. This will eliminate
-the reliance on the rtnl_mutex.
-
-Add lockdep annotations and put comments where holding the lock is not
-necessary, and priv->mac can be dereferenced freely.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 43 ++++++++++++--
- .../net/ethernet/freescale/dpaa2/dpaa2-eth.h | 6 ++
- .../ethernet/freescale/dpaa2/dpaa2-ethtool.c | 58 +++++++++++++++----
- 3 files changed, 91 insertions(+), 16 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -2021,8 +2021,11 @@ static int dpaa2_eth_link_state_update(s
-
- /* When we manage the MAC/PHY using phylink there is no need
- * to manually update the netif_carrier.
-+ * We can avoid locking because we are called from the "link changed"
-+ * IRQ handler, which is the same as the "endpoint changed" IRQ handler
-+ * (the writer to priv->mac), so we cannot race with it.
- */
-- if (dpaa2_eth_is_type_phy(priv))
-+ if (dpaa2_mac_is_type_phy(priv->mac))
- goto out;
-
- /* Chech link state; speed / duplex changes are not treated yet */
-@@ -2061,6 +2064,8 @@ static int dpaa2_eth_open(struct net_dev
- priv->dpbp_dev->obj_desc.id, priv->bpid);
- }
-
-+ mutex_lock(&priv->mac_lock);
-+
- if (!dpaa2_eth_is_type_phy(priv)) {
- /* We'll only start the txqs when the link is actually ready;
- * make sure we don't race against the link up notification,
-@@ -2079,6 +2084,7 @@ static int dpaa2_eth_open(struct net_dev
-
- err = dpni_enable(priv->mc_io, 0, priv->mc_token);
- if (err < 0) {
-+ mutex_unlock(&priv->mac_lock);
- netdev_err(net_dev, "dpni_enable() failed\n");
- goto enable_err;
- }
-@@ -2086,6 +2092,8 @@ static int dpaa2_eth_open(struct net_dev
- if (dpaa2_eth_is_type_phy(priv))
- dpaa2_mac_start(priv->mac);
-
-+ mutex_unlock(&priv->mac_lock);
-+
- return 0;
-
- enable_err:
-@@ -2157,6 +2165,8 @@ static int dpaa2_eth_stop(struct net_dev
- int dpni_enabled = 0;
- int retries = 10;
-
-+ mutex_lock(&priv->mac_lock);
-+
- if (dpaa2_eth_is_type_phy(priv)) {
- dpaa2_mac_stop(priv->mac);
- } else {
-@@ -2164,6 +2174,8 @@ static int dpaa2_eth_stop(struct net_dev
- netif_carrier_off(net_dev);
- }
-
-+ mutex_unlock(&priv->mac_lock);
-+
- /* On dpni_disable(), the MC firmware will:
- * - stop MAC Rx and wait for all Rx frames to be enqueued to software
- * - cut off WRIOP dequeues from egress FQs and wait until transmission
-@@ -2489,12 +2501,20 @@ static int dpaa2_eth_ts_ioctl(struct net
- static int dpaa2_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- struct dpaa2_eth_priv *priv = netdev_priv(dev);
-+ int err;
-
- if (cmd == SIOCSHWTSTAMP)
- return dpaa2_eth_ts_ioctl(dev, rq, cmd);
-
-- if (dpaa2_eth_is_type_phy(priv))
-- return phylink_mii_ioctl(priv->mac->phylink, rq, cmd);
-+ mutex_lock(&priv->mac_lock);
-+
-+ if (dpaa2_eth_is_type_phy(priv)) {
-+ err = phylink_mii_ioctl(priv->mac->phylink, rq, cmd);
-+ mutex_unlock(&priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&priv->mac_lock);
-
- return -EOPNOTSUPP;
- }
-@@ -4458,7 +4478,9 @@ static int dpaa2_eth_connect_mac(struct
- goto err_close_mac;
- }
-
-+ mutex_lock(&priv->mac_lock);
- priv->mac = mac;
-+ mutex_unlock(&priv->mac_lock);
-
- return 0;
-
-@@ -4471,9 +4493,12 @@ err_free_mac:
-
- static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv)
- {
-- struct dpaa2_mac *mac = priv->mac;
-+ struct dpaa2_mac *mac;
-
-+ mutex_lock(&priv->mac_lock);
-+ mac = priv->mac;
- priv->mac = NULL;
-+ mutex_unlock(&priv->mac_lock);
-
- if (!mac)
- return;
-@@ -4492,6 +4517,7 @@ static irqreturn_t dpni_irq0_handler_thr
- struct fsl_mc_device *dpni_dev = to_fsl_mc_device(dev);
- struct net_device *net_dev = dev_get_drvdata(dev);
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+ bool had_mac;
- int err;
-
- err = dpni_get_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle,
-@@ -4509,7 +4535,12 @@ static irqreturn_t dpni_irq0_handler_thr
- dpaa2_eth_update_tx_fqids(priv);
-
- rtnl_lock();
-- if (dpaa2_eth_has_mac(priv))
-+ /* We can avoid locking because the "endpoint changed" IRQ
-+ * handler is the only one who changes priv->mac at runtime,
-+ * so we are not racing with anyone.
-+ */
-+ had_mac = !!priv->mac;
-+ if (had_mac)
- dpaa2_eth_disconnect_mac(priv);
- else
- dpaa2_eth_connect_mac(priv);
-@@ -4610,6 +4641,8 @@ static int dpaa2_eth_probe(struct fsl_mc
- priv = netdev_priv(net_dev);
- priv->net_dev = net_dev;
-
-+ mutex_init(&priv->mac_lock);
-+
- priv->iommu_domain = iommu_get_domain_for_dev(dev);
-
- priv->tx_tstamp_type = HWTSTAMP_TX_OFF;
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -580,6 +580,8 @@ struct dpaa2_eth_priv {
- #endif
-
- struct dpaa2_mac *mac;
-+ /* Serializes changes to priv->mac */
-+ struct mutex mac_lock;
- struct workqueue_struct *dpaa2_ptp_wq;
- struct work_struct tx_onestep_tstamp;
- struct sk_buff_head tx_skbs;
-@@ -733,11 +735,15 @@ static inline unsigned int dpaa2_eth_rx_
-
- static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
- {
-+ lockdep_assert_held(&priv->mac_lock);
-+
- return dpaa2_mac_is_type_phy(priv->mac);
- }
-
- static inline bool dpaa2_eth_has_mac(struct dpaa2_eth_priv *priv)
- {
-+ lockdep_assert_held(&priv->mac_lock);
-+
- return priv->mac ? true : false;
- }
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -86,11 +86,16 @@ static void dpaa2_eth_get_drvinfo(struct
- static int dpaa2_eth_nway_reset(struct net_device *net_dev)
- {
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+ int err = -EOPNOTSUPP;
-+
-+ mutex_lock(&priv->mac_lock);
-
- if (dpaa2_eth_is_type_phy(priv))
-- return phylink_ethtool_nway_reset(priv->mac->phylink);
-+ err = phylink_ethtool_nway_reset(priv->mac->phylink);
-+
-+ mutex_unlock(&priv->mac_lock);
-
-- return -EOPNOTSUPP;
-+ return err;
- }
-
- static int
-@@ -98,10 +103,18 @@ dpaa2_eth_get_link_ksettings(struct net_
- struct ethtool_link_ksettings *link_settings)
- {
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+ int err;
-
-- if (dpaa2_eth_is_type_phy(priv))
-- return phylink_ethtool_ksettings_get(priv->mac->phylink,
-- link_settings);
-+ mutex_lock(&priv->mac_lock);
-+
-+ if (dpaa2_eth_is_type_phy(priv)) {
-+ err = phylink_ethtool_ksettings_get(priv->mac->phylink,
-+ link_settings);
-+ mutex_unlock(&priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&priv->mac_lock);
-
- link_settings->base.autoneg = AUTONEG_DISABLE;
- if (!(priv->link_state.options & DPNI_LINK_OPT_HALF_DUPLEX))
-@@ -116,11 +129,17 @@ dpaa2_eth_set_link_ksettings(struct net_
- const struct ethtool_link_ksettings *link_settings)
- {
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+ int err = -EOPNOTSUPP;
-
-- if (!dpaa2_eth_is_type_phy(priv))
-- return -EOPNOTSUPP;
-+ mutex_lock(&priv->mac_lock);
-+
-+ if (dpaa2_eth_is_type_phy(priv))
-+ err = phylink_ethtool_ksettings_set(priv->mac->phylink,
-+ link_settings);
-
-- return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings);
-+ mutex_unlock(&priv->mac_lock);
-+
-+ return err;
- }
-
- static void dpaa2_eth_get_pauseparam(struct net_device *net_dev,
-@@ -129,11 +148,16 @@ static void dpaa2_eth_get_pauseparam(str
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
- u64 link_options = priv->link_state.options;
-
-+ mutex_lock(&priv->mac_lock);
-+
- if (dpaa2_eth_is_type_phy(priv)) {
- phylink_ethtool_get_pauseparam(priv->mac->phylink, pause);
-+ mutex_unlock(&priv->mac_lock);
- return;
- }
-
-+ mutex_unlock(&priv->mac_lock);
-+
- pause->rx_pause = dpaa2_eth_rx_pause_enabled(link_options);
- pause->tx_pause = dpaa2_eth_tx_pause_enabled(link_options);
- pause->autoneg = AUTONEG_DISABLE;
-@@ -152,9 +176,17 @@ static int dpaa2_eth_set_pauseparam(stru
- return -EOPNOTSUPP;
- }
-
-- if (dpaa2_eth_is_type_phy(priv))
-- return phylink_ethtool_set_pauseparam(priv->mac->phylink,
-- pause);
-+ mutex_lock(&priv->mac_lock);
-+
-+ if (dpaa2_eth_is_type_phy(priv)) {
-+ err = phylink_ethtool_set_pauseparam(priv->mac->phylink,
-+ pause);
-+ mutex_unlock(&priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&priv->mac_lock);
-+
- if (pause->autoneg)
- return -EOPNOTSUPP;
-
-@@ -307,8 +339,12 @@ static void dpaa2_eth_get_ethtool_stats(
- }
- *(data + i++) = buf_cnt;
-
-+ mutex_lock(&priv->mac_lock);
-+
- if (dpaa2_eth_has_mac(priv))
- dpaa2_mac_get_ethtool_stats(priv->mac, data + i);
-+
-+ mutex_unlock(&priv->mac_lock);
- }
-
- static int dpaa2_eth_prep_eth_rule(struct ethhdr *eth_value, struct ethhdr *eth_mask,
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0011-net-dpaa2-switch-serialize-changes-to-priv-mac-with.patch b/target/linux/armsr/patches-6.1/701-v6.2-0011-net-dpaa2-switch-serialize-changes-to-priv-mac-with.patch
deleted file mode 100644
index abf127b155..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0011-net-dpaa2-switch-serialize-changes-to-priv-mac-with.patch
+++ /dev/null
@@ -1,203 +0,0 @@
-From 80d12452a5f160c39d63efc1be07df36f9d07133 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:20 +0200
-Subject: [PATCH 13/14] net: dpaa2-switch: serialize changes to priv->mac with
- a mutex
-
-The dpaa2-switch driver uses a DPMAC in the same way as the dpaa2-eth
-driver, so we need to duplicate the locking solution established by the
-previous change to the switch driver as well.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- .../freescale/dpaa2/dpaa2-switch-ethtool.c | 32 +++++++++++++++----
- .../ethernet/freescale/dpaa2/dpaa2-switch.c | 31 ++++++++++++++++--
- .../ethernet/freescale/dpaa2/dpaa2-switch.h | 2 ++
- 3 files changed, 55 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-@@ -60,11 +60,18 @@ dpaa2_switch_get_link_ksettings(struct n
- {
- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
- struct dpsw_link_state state = {0};
-- int err = 0;
-+ int err;
-
-- if (dpaa2_switch_port_is_type_phy(port_priv))
-- return phylink_ethtool_ksettings_get(port_priv->mac->phylink,
-- link_ksettings);
-+ mutex_lock(&port_priv->mac_lock);
-+
-+ if (dpaa2_switch_port_is_type_phy(port_priv)) {
-+ err = phylink_ethtool_ksettings_get(port_priv->mac->phylink,
-+ link_ksettings);
-+ mutex_unlock(&port_priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&port_priv->mac_lock);
-
- err = dpsw_if_get_link_state(port_priv->ethsw_data->mc_io, 0,
- port_priv->ethsw_data->dpsw_handle,
-@@ -99,9 +106,16 @@ dpaa2_switch_set_link_ksettings(struct n
- bool if_running;
- int err = 0, ret;
-
-- if (dpaa2_switch_port_is_type_phy(port_priv))
-- return phylink_ethtool_ksettings_set(port_priv->mac->phylink,
-- link_ksettings);
-+ mutex_lock(&port_priv->mac_lock);
-+
-+ if (dpaa2_switch_port_is_type_phy(port_priv)) {
-+ err = phylink_ethtool_ksettings_set(port_priv->mac->phylink,
-+ link_ksettings);
-+ mutex_unlock(&port_priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&port_priv->mac_lock);
-
- /* Interface needs to be down to change link settings */
- if_running = netif_running(netdev);
-@@ -189,8 +203,12 @@ static void dpaa2_switch_ethtool_get_sta
- dpaa2_switch_ethtool_counters[i].name, err);
- }
-
-+ mutex_lock(&port_priv->mac_lock);
-+
- if (dpaa2_switch_port_has_mac(port_priv))
- dpaa2_mac_get_ethtool_stats(port_priv->mac, data + i);
-+
-+ mutex_unlock(&port_priv->mac_lock);
- }
-
- const struct ethtool_ops dpaa2_switch_port_ethtool_ops = {
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-@@ -603,8 +603,11 @@ static int dpaa2_switch_port_link_state_
-
- /* When we manage the MAC/PHY using phylink there is no need
- * to manually update the netif_carrier.
-+ * We can avoid locking because we are called from the "link changed"
-+ * IRQ handler, which is the same as the "endpoint changed" IRQ handler
-+ * (the writer to port_priv->mac), so we cannot race with it.
- */
-- if (dpaa2_switch_port_is_type_phy(port_priv))
-+ if (dpaa2_mac_is_type_phy(port_priv->mac))
- return 0;
-
- /* Interrupts are received even though no one issued an 'ifconfig up'
-@@ -684,6 +687,8 @@ static int dpaa2_switch_port_open(struct
- struct ethsw_core *ethsw = port_priv->ethsw_data;
- int err;
-
-+ mutex_lock(&port_priv->mac_lock);
-+
- if (!dpaa2_switch_port_is_type_phy(port_priv)) {
- /* Explicitly set carrier off, otherwise
- * netif_carrier_ok() will return true and cause 'ip link show'
-@@ -697,6 +702,7 @@ static int dpaa2_switch_port_open(struct
- port_priv->ethsw_data->dpsw_handle,
- port_priv->idx);
- if (err) {
-+ mutex_unlock(&port_priv->mac_lock);
- netdev_err(netdev, "dpsw_if_enable err %d\n", err);
- return err;
- }
-@@ -706,6 +712,8 @@ static int dpaa2_switch_port_open(struct
- if (dpaa2_switch_port_is_type_phy(port_priv))
- dpaa2_mac_start(port_priv->mac);
-
-+ mutex_unlock(&port_priv->mac_lock);
-+
- return 0;
- }
-
-@@ -715,6 +723,8 @@ static int dpaa2_switch_port_stop(struct
- struct ethsw_core *ethsw = port_priv->ethsw_data;
- int err;
-
-+ mutex_lock(&port_priv->mac_lock);
-+
- if (dpaa2_switch_port_is_type_phy(port_priv)) {
- dpaa2_mac_stop(port_priv->mac);
- } else {
-@@ -722,6 +732,8 @@ static int dpaa2_switch_port_stop(struct
- netif_carrier_off(netdev);
- }
-
-+ mutex_unlock(&port_priv->mac_lock);
-+
- err = dpsw_if_disable(port_priv->ethsw_data->mc_io, 0,
- port_priv->ethsw_data->dpsw_handle,
- port_priv->idx);
-@@ -1461,7 +1473,9 @@ static int dpaa2_switch_port_connect_mac
- }
- }
-
-+ mutex_lock(&port_priv->mac_lock);
- port_priv->mac = mac;
-+ mutex_unlock(&port_priv->mac_lock);
-
- return 0;
-
-@@ -1474,9 +1488,12 @@ err_free_mac:
-
- static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv)
- {
-- struct dpaa2_mac *mac = port_priv->mac;
-+ struct dpaa2_mac *mac;
-
-+ mutex_lock(&port_priv->mac_lock);
-+ mac = port_priv->mac;
- port_priv->mac = NULL;
-+ mutex_unlock(&port_priv->mac_lock);
-
- if (!mac)
- return;
-@@ -1495,6 +1512,7 @@ static irqreturn_t dpaa2_switch_irq0_han
- struct ethsw_port_priv *port_priv;
- u32 status = ~0;
- int err, if_id;
-+ bool had_mac;
-
- err = dpsw_get_irq_status(ethsw->mc_io, 0, ethsw->dpsw_handle,
- DPSW_IRQ_INDEX_IF, &status);
-@@ -1513,7 +1531,12 @@ static irqreturn_t dpaa2_switch_irq0_han
-
- if (status & DPSW_IRQ_EVENT_ENDPOINT_CHANGED) {
- rtnl_lock();
-- if (dpaa2_switch_port_has_mac(port_priv))
-+ /* We can avoid locking because the "endpoint changed" IRQ
-+ * handler is the only one who changes priv->mac at runtime,
-+ * so we are not racing with anyone.
-+ */
-+ had_mac = !!port_priv->mac;
-+ if (had_mac)
- dpaa2_switch_port_disconnect_mac(port_priv);
- else
- dpaa2_switch_port_connect_mac(port_priv);
-@@ -3250,6 +3273,8 @@ static int dpaa2_switch_probe_port(struc
- port_priv->netdev = port_netdev;
- port_priv->ethsw_data = ethsw;
-
-+ mutex_init(&port_priv->mac_lock);
-+
- port_priv->idx = port_idx;
- port_priv->stp_state = BR_STATE_FORWARDING;
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
-@@ -161,6 +161,8 @@ struct ethsw_port_priv {
-
- struct dpaa2_switch_filter_block *filter_block;
- struct dpaa2_mac *mac;
-+ /* Protects against changes to port_priv->mac */
-+ struct mutex mac_lock;
- };
-
- /* Switch data */
diff --git a/target/linux/armsr/patches-6.1/701-v6.2-0012-net-dpaa2-mac-move-rtnl_lock-only-around-phylink.patch b/target/linux/armsr/patches-6.1/701-v6.2-0012-net-dpaa2-mac-move-rtnl_lock-only-around-phylink.patch
deleted file mode 100644
index d71b85b452..0000000000
--- a/target/linux/armsr/patches-6.1/701-v6.2-0012-net-dpaa2-mac-move-rtnl_lock-only-around-phylink.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From 4ea2faf5bb13d9ba9f07e996d495c4cbe34a4236 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean at nxp.com>
-Date: Tue, 29 Nov 2022 16:12:21 +0200
-Subject: [PATCH 14/14] net: dpaa2-mac: move rtnl_lock() only around
- phylink_{,dis}connect_phy()
-
-After the introduction of a private mac_lock that serializes access to
-priv->mac (and port_priv->mac in the switch), the only remaining purpose
-of rtnl_lock() is to satisfy the locking requirements of
-phylink_fwnode_phy_connect() and phylink_disconnect_phy().
-
-But the functions these live in, dpaa2_mac_connect() and
-dpaa2_mac_disconnect(), have contradictory locking requirements.
-While phylink_fwnode_phy_connect() wants rtnl_lock() to be held,
-phylink_create() wants it to not be held.
-
-Move the rtnl_lock() from top-level (in the dpaa2-eth and dpaa2-switch
-drivers) to only surround the phylink calls that require it, in the
-dpaa2-mac library code.
-
-This is possible because dpaa2_mac_connect() and dpaa2_mac_disconnect()
-run unlocked, and there isn't any danger of an AB/BA deadlock between
-the rtnl_mutex and other private locks.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei at nxp.com>
-Signed-off-by: Paolo Abeni <pabeni at redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 4 ----
- 3 files changed, 5 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -4534,7 +4534,6 @@ static irqreturn_t dpni_irq0_handler_thr
- dpaa2_eth_set_mac_addr(netdev_priv(net_dev));
- dpaa2_eth_update_tx_fqids(priv);
-
-- rtnl_lock();
- /* We can avoid locking because the "endpoint changed" IRQ
- * handler is the only one who changes priv->mac at runtime,
- * so we are not racing with anyone.
-@@ -4544,7 +4543,6 @@ static irqreturn_t dpni_irq0_handler_thr
- dpaa2_eth_disconnect_mac(priv);
- else
- dpaa2_eth_connect_mac(priv);
-- rtnl_unlock();
- }
-
- return IRQ_HANDLED;
-@@ -4863,9 +4861,7 @@ static int dpaa2_eth_remove(struct fsl_m
- else
- fsl_mc_free_irqs(ls_dev);
-
-- rtnl_lock();
- dpaa2_eth_disconnect_mac(priv);
-- rtnl_unlock();
- dpaa2_eth_free_rings(priv);
- free_percpu(priv->fd);
- free_percpu(priv->sgt_cache);
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -428,7 +428,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *
- }
- mac->phylink = phylink;
-
-+ rtnl_lock();
- err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
-+ rtnl_unlock();
- if (err) {
- netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
- goto err_phylink_destroy;
-@@ -446,7 +448,10 @@ err_pcs_destroy:
-
- void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
- {
-+ rtnl_lock();
- phylink_disconnect_phy(mac->phylink);
-+ rtnl_unlock();
-+
- phylink_destroy(mac->phylink);
- dpaa2_pcs_destroy(mac);
- of_phy_put(mac->serdes_phy);
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-@@ -1530,7 +1530,6 @@ static irqreturn_t dpaa2_switch_irq0_han
- }
-
- if (status & DPSW_IRQ_EVENT_ENDPOINT_CHANGED) {
-- rtnl_lock();
- /* We can avoid locking because the "endpoint changed" IRQ
- * handler is the only one who changes priv->mac at runtime,
- * so we are not racing with anyone.
-@@ -1540,7 +1539,6 @@ static irqreturn_t dpaa2_switch_irq0_han
- dpaa2_switch_port_disconnect_mac(port_priv);
- else
- dpaa2_switch_port_connect_mac(port_priv);
-- rtnl_unlock();
- }
-
- out:
-@@ -2952,9 +2950,7 @@ static void dpaa2_switch_remove_port(str
- {
- struct ethsw_port_priv *port_priv = ethsw->ports[port_idx];
-
-- rtnl_lock();
- dpaa2_switch_port_disconnect_mac(port_priv);
-- rtnl_unlock();
- free_netdev(port_priv->netdev);
- ethsw->ports[port_idx] = NULL;
- }
More information about the lede-commits
mailing list