[openwrt/openwrt] kirkwood: remove left-over files-6.1 folder
LEDE Commits
lede-commits at lists.infradead.org
Fri Sep 20 10:58:12 PDT 2024
dangole pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/97e1a223fd2349582ca1c043e55ee1175bd968a9
commit 97e1a223fd2349582ca1c043e55ee1175bd968a9
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Fri Sep 20 18:53:46 2024 +0100
kirkwood: remove left-over files-6.1 folder
Remove folder with DTS files for Linux 6.1 which has already been
dropped.
Fixes: f142ce87d9 ("kirkwood: remove 6.1 support")
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
.../arch/arm/boot/dts/kirkwood-dns320l.dts | 202 -----------------
.../arch/arm/boot/dts/kirkwood-e4200-v2.dts | 8 -
.../arch/arm/boot/dts/kirkwood-ea3500.dts | 243 ---------------------
.../arch/arm/boot/dts/kirkwood-ea4500.dts | 8 -
.../arch/arm/boot/dts/kirkwood-goflexhome.dts | 135 ------------
.../arch/arm/boot/dts/kirkwood-ix4-200d.dts | 199 -----------------
.../files-6.1/arch/arm/boot/dts/kirkwood-nas1.dts | 234 --------------------
.../arch/arm/boot/dts/kirkwood-nsa310b.dts | 144 ------------
.../files-6.1/arch/arm/boot/dts/kirkwood-on100.dts | 165 --------------
.../files-6.1/arch/arm/boot/dts/kirkwood-stora.dts | 227 -------------------
10 files changed, 1565 deletions(-)
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts
deleted file mode 100644
index afeb76d5ff..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts
+++ /dev/null
@@ -1,202 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Device Tree file for DLINK DNS-320L
- *
- * Copyright (C) 2024, Zoltan HERPAI <wigyori at uid0.hu>
- * Copyright (C) 2015, Sunke Schlüters <sunke-dev at schlueters.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * This file is based on the works of:
- * - Sunke Schlüters <sunke-dev at schlueters.de>
- * - https://github.com/scus1/dns320l/blob/master/kernel/dts/kirkwood-dns320l.dts
- * - Andreas Böhler <dev at aboehler.at>:
- * - http://www.aboehler.at/doku/doku.php/projects:dns320l
- * - http://www.aboehler.at/hg/linux-dns320l/file/ba7a60ad7687/linux-3.12/kirkwood-dns320l.dts
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "D-Link DNS-320L";
- compatible = "dlink,dns320l", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- button at 1 {
- label = "Reset push button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 28 1>;
- };
-
- button at 2 {
- label = "USB unmount button";
- linux,code = <KEY_EJECTCD>;
- gpios = <&gpio0 27 1>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_leds>;
- pinctrl-names = "default";
-
- blue-usb {
- label = "dns320l:usb:blue";
- gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbport";
- };
-
- orange-usb {
- label = "dns320l:usb:orange";
- gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- };
-
- orange-l-hdd {
- label = "dns320l:orange:l_hdd";
- gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- };
-
- orange-r-hdd {
- label = "dns320l:orange:r_hdd";
- gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- };
- };
-
- ocp at f1000000 {
- sata at 80000 {
- status = "okay";
- nr-ports = <2>;
- };
-
- serial at 12000 {
- status = "okay";
- };
-
- serial at 12100 {
- pinctrl-0 = <&pmx_uart1>;
- pinctrl-names = "default";
- status = "okay";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_sata>;
- pinctrl-names = "default";
-
- sata_power: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "SATA Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpios = <&gpio0 24 0>;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
- chip-delay = <40>;
- status = "okay";
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- };
-
- partition at 100000 {
- label = "ubootenv";
- reg = <0x100000 0x20000>;
- };
-
- partition at 120000 {
- label = "ubi";
- reg = <0x120000 0x6de0000>;
- };
-
- partition at 6f00000 {
- label = "mini firmware";
- reg = <0x6f00000 0xa00000>;
- };
-
- partition at 7900000 {
- label = "config";
- reg = <0x7900000 0x500000>;
- };
-
- partition at 7e00000 {
- label = "my-dlink";
- reg = <0x7e00000 0x200000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy at 0 {
- reg = <0>;
- };
-};
-
-&pinctrl {
- pmx_sata1: pmx-sata1 {
- marvell,pins = "mpp20";
- marvell,function = "sata1";
- };
-
- pmx_sata0: pmx-sata0 {
- marvell,pins = "mpp21";
- marvell,function = "sata0";
- };
-
- pmx_power_sata: pmx-power-sata {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- pmx_leds: pmx-leds {
- marvell,pins = "mpp22", "mpp23", "mpp25", "mpp26";
- marvell,function = "gpio";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp27", "mpp28", "mpp29";
- marvell,function = "gpio";
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port at 0 {
- phy-handle = <ðphy0>;
- };
-};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-e4200-v2.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-e4200-v2.dts
deleted file mode 100644
index bfd708a677..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-e4200-v2.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "kirkwood-linksys-viper.dts"
-
-/ {
- model = "Linksys E4200 v2 (Viper)";
- compatible = "linksys,e4200-v2", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ea3500.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ea3500.dts
deleted file mode 100644
index e9f9e30bb4..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ea3500.dts
+++ /dev/null
@@ -1,243 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
- *
- * (c) 2013 Jonas Gorski <jogo at openwrt.org>
- * (c) 2013 Deutsche Telekom Innovation Laboratories
- * (c) 2014 Luka Perkov <luka at openwrt.org>
- * (c) 2014 Dan Walters <dan at walters.io>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
- model = "Linksys EA3500 (Audi)";
- compatible = "linksys,ea3500", "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
- memory at 0 {
- device_type = "memory";
- reg = <0x00000000 0x4000000>;
- };
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>;
- pinctrl-names = "default";
-
- wps {
- label = "WPS Button";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&pmx_led_green_power>;
- pinctrl-names = "default";
-
- led_power: power {
- label = "audi:green:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-};
-
-&pinctrl {
- pmx_led_green_power: pmx-led-green-power {
- marvell,pins = "mpp7";
- marvell,function = "gpo";
- };
-
- pmx_btn_wps: pmx-btn-wps {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
-
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
-};
-
-&mdio {
- status = "okay";
-
- switch at 10 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <16>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- label = "ethernet1";
- };
-
- port at 1 {
- reg = <1>;
- label = "ethernet2";
- };
-
- port at 2 {
- reg = <2>;
- label = "ethernet3";
- };
-
- port at 3 {
- reg = <3>;
- label = "ethernet4";
- };
-
- port at 4 {
- reg = <4>;
- label = "internet";
- };
-
- port at 5 {
- reg = <5>;
- phy-mode = "rgmii-id";
- ethernet = <ð0port>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition at 80000 {
- label = "u_env";
- reg = <0x80000 0x4000>;
- };
-
- partition at 84000 {
- label = "s_env";
- reg = <0x84000 0x4000>;
- };
-
- partition at 200000 {
- label = "kernel1";
- reg = <0x200000 0x1400000>;
- };
-
- partition at 600000 {
- label = "rootfs1";
- reg = <0x600000 0x1000000>;
- };
-
- partition at 1600000 {
- label = "kernel2";
- reg = <0x1600000 0x1400000>;
- };
-
- partition at 1a00000 {
- label = "rootfs2";
- reg = <0x1a00000 0x1000000>;
- };
-
- partition at 2a00000 {
- label = "syscfg";
- reg = <0x2a00000 0x1600000>;
- };
-
- partition at 88000 {
- label = "unused";
- reg = <0x88000 0x178000>;
- };
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
- * fixed speed and duplex.
- */
-ð0 {
- status = "okay";
-
- ethernet0-port at 0 {
- speed = <1000>;
- duplex = <1>;
- phy-mode = "rgmii";
- };
-};
-
-/* eth1 is connected to the switch at port 6. However DSA only supports a
- * single CPU port. This port is disabled to avoid confusion.
- */
-ð1 {
- status = "disabled";
-};
-
-/* There is no battery on the board, so the RTC does not keep
- * time when there is no power, making it useless.
- */
-&rtc {
- status = "disabled";
-};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ea4500.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ea4500.dts
deleted file mode 100644
index 495cff34a4..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ea4500.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "kirkwood-linksys-viper.dts"
-
-/ {
- model = "Linksys EA4500 (Viper)";
- compatible = "linksys,ea4500", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-goflexhome.dts
deleted file mode 100644
index 2f4109fe63..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-goflexhome.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Seagate GoFlex Home";
- compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_health;
- led-failsafe = &led_fault;
- led-running = &led_health;
- led-upgrade = &led_fault;
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
- stdout-path = &uart0;
- };
-
- ocp at f1000000 {
- pinctrl: pin-controller at 10000 {
- pmx_usb_power_enable: pmx-usb-power-enable {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_white: pmx-led-white {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
- pmx_led_green: pmx-led_green {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
-
- pmx_led_orange: pmx-led-orange {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- };
-
- serial at 12000 {
- status = "okay";
- };
-
- sata at 80000 {
- status = "okay";
- nr-ports = <2>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- led_health: health {
- label = "status:green:health";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- led_fault: fault {
- label = "status:orange:fault";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- misc {
- label = "status:white:misc";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "disk-activity";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-0 = <&pmx_usb_power_enable>;
- pinctrl-names = "default";
-
- usb_power: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- chip-delay = <40>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0000000 0x0100000>;
- read-only;
- };
-
- partition at 100000 {
- label = "ubi";
- reg = <0x0100000 0xff00000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy at 0 {
- reg = <0>;
- };
-};
-
-ð0 {
- status = "okay";
-
- ethernet0-port at 0 {
- phy-handle = <ðphy0>;
- };
-};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ix4-200d.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ix4-200d.dts
deleted file mode 100644
index 6220fbf137..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ix4-200d.dts
+++ /dev/null
@@ -1,199 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Iomega ix4-200d";
- compatible = "iom,ix4-200d", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_status_white;
- led-failsafe = &led_status_red;
- led-running = &led_power_white;
- led-upgrade = &led_status_red;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- ocp at f1000000 {
- i2c at 11000 {
- status = "okay";
-
- adt7473 at 2e {
- compatible = "adi,adt7473";
- reg = <0x2e>;
- };
- };
-
- pinctrl: pin-controller at 10000 {
- pmx_spi: pmx-spi {
- marvell,pins = "mpp12", "mpp13", "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_keys: pmx-keys {
- marvell,pins = "mpp16", "mpp29", "mpp47", "mpp49";
- marvell,function = "gpio";
- };
- };
-
- sata at 80000 {
- status = "okay";
- nr-ports = <2>;
- };
-
- serial at 12000 {
- status = "okay";
- };
-
- spi3 {
- compatible = "spi-gpio";
- #address-cells = <0x1>;
- ranges;
- status = "okay";
- sck-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- mosi-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- cs-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- num-chipselects = <1>;
- #size-cells = <0>;
-
- gpio_spi: gpio_spi at 0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- spi-max-frequency = <100000>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_keys>;
- pinctrl-names = "default";
-
- button-0 {
- label = "Next Button";
- linux,code = <BTN_0>;
- gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- };
-
- button-1 {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
- button-2 {
- label = "Cancel Button";
- linux,code = <BTN_1>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- button-3 {
- label = "Power Button";
- linux,code = <KEY_POWER2>;
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- led_status_white: led-0 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&gpio_spi 4 GPIO_ACTIVE_LOW>;
- };
-
- led_status_red: led-1 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
- };
-
- led_power_white: led-2 {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&gpio_spi 7 GPIO_ACTIVE_HIGH>;
- };
- };
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port at 0 {
- phy-handle = <ðphy0>;
- };
-};
-
-ð1 {
- status = "okay";
- ethernet1-port at 0 {
- phy-handle = <ðphy1>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy at 8 {
- reg = <8>;
- };
-
- ethphy1: ethernet-phy at 9 {
- reg = <9>;
- };
-};
-
-&nand {
- status = "okay";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
- };
-
- partition at a0000 {
- label = "u-boot environment";
- reg = <0xa0000 0x20000>;
- read-only;
- };
-
- partition at 100000 {
- label = "kernel";
- reg = <0x100000 0x400000>;
- };
-
- partition at 500000 {
- label = "ubi";
- reg = <0x500000 0x1B00000>;
- };
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nas1.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nas1.dts
deleted file mode 100644
index 0ceddb0d64..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nas1.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "ipTIME NAS1";
- compatible = "iptime,nas1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- aliases {
- serial0 = &uart0;
- led-boot = &led_ready;
- led-failsafe = &led_ready;
- led-running = &led_ready;
- led-upgrade = &led_ready;
- };
-
- chosen {
- /*
- * "root" argument from the stock bootloader should be ignored
- * as it'll prevent the kernel from finding the correct rootfs.
- */
- bootargs-append = " console=ttyS0,115200 root=";
- stdout-path = "serial0:115200n8";
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&pmx_led>;
- pinctrl-names = "default";
-
- hdd {
- label = "blue:hdd";
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- };
-
- usb {
- function = LED_FUNCTION_USB;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- led_ready: ready {
- label = "blue:ready";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&pmx_button>;
- pinctrl-names = "default";
-
- reset-copy {
- label = "Reset/Copy Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio-fan {
- compatible = "gpio-fan";
-
- pinctrl-0 = <&pmx_fan>;
- pinctrl-names = "default";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>,
- <&gpio1 10 GPIO_ACTIVE_HIGH>;
- /* We don't know the exact rpm, just use dummy values here. */
- gpio-fan,speed-map = <0 0>, <1 1>, <2 2>;
- #cooling-cells = <2>;
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- gpios = <&pca9536 0 GPIO_ACTIVE_LOW>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-0 = <&pmx_usb_vbus>;
- pinctrl-names = "default";
-
- regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinctrl {
- pmx_led: pmx-led {
- marvell,pins = "mpp35", "mpp45", "mpp46";
- marvell,function = "gpio";
- };
-
- pmx_fan: pmx-fan {
- marvell,pins = "mpp41", "mpp42";
- marvell,function = "gpio";
- };
-
- pmx_usb_vbus: pmx-usb-vbus {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
-
- pmx_button: pmx-button {
- marvell,pins = "mpp44", "mpp48";
- marvell,function = "gpio";
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash at 0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition at 40000 {
- compatible = "openwrt,uimage", "denx,uimage";
- openwrt,offset = <0x400>;
- label = "firmware";
- reg = <0x40000 0xf80000>;
- };
-
- partition at fc0000 {
- label = "config";
- reg = <0xfc0000 0x40000>;
- read-only;
- };
- };
- };
-};
-
-&rtc {
- status = "disabled";
-};
-
-&i2c0 {
- status = "okay";
-
- pca9536: gpio at 41 {
- compatible = "nxp,pca9536";
- reg = <0x41>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ehci_port1: port at 1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphyb: ethernet-phy at b {
- reg = <0x0b>;
- };
-};
-
-ð1 {
- status = "okay";
-};
-
-ð1port {
- phy-handle = <ðphyb>;
- phy-connection-type = "rgmii-id";
-};
-
-&sata {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
- nr-ports = <1>;
-
- sata-port at 0 {
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nsa310b.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nsa310b.dts
deleted file mode 100644
index 594be97929..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nsa310b.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/*
- * There are at least two different NSA310 designs. This variant has
- * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
- */
-
-/ {
- model = "Zyxel NSA310b";
- compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_green_sys;
- led-failsafe = &led_red_sys;
- led-running = &led_green_sys;
- led-upgrade = &led_red_sys;
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
- };
-
- ocp at f1000000 {
- pinctrl: pin-controller at 10000 {
- pinctrl-names = "default";
-
- pmx_led_esata_green: pmx-led-esata-green {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_led_esata_red: pmx-led-esata-red {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_led_usb_green: pmx-led-usb-green {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_led_usb_red: pmx-led-usb-red {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_green: pmx-led-sys-green {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_red: pmx-led-sys-red {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd_green: pmx-led-hdd-green {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd_red: pmx-led-hdd-red {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
-
- };
-
- i2c at 11000 {
- status = "okay";
-
- lm85: lm85 at 2e {
- compatible = "national,lm85";
- reg = <0x2e>;
- };
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- led_green_sys: green-sys {
- label = "nsa310:green:sys";
- gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- led_red_sys: red-sys {
- label = "nsa310:red:sys";
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
- green-hdd {
- label = "nsa310:green:hdd";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- };
-
- red-hdd {
- label = "nsa310:red:hdd";
- gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- };
-
- green-esata {
- label = "nsa310:green:esata";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata2";
- };
-
- red-esata {
- label = "nsa310:red:esata";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- green-usb {
- label = "nsa310:green:usb";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usb-host";
- };
-
- red-usb {
- label = "nsa310:red:usb";
- gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- };
-
- green-copy {
- label = "nsa310:green:copy";
- gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- };
-
- red-copy {
- label = "nsa310:red:copy";
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- };
- };
-};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-on100.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-on100.dts
deleted file mode 100644
index 5ae66ede2f..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-on100.dts
+++ /dev/null
@@ -1,165 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
- model = "Cisco Systems ON100";
- compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
- memory at 0 {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- aliases {
- led-boot = &led_health_green;
- led-failsafe = &led_health_red;
- led-running = &led_health_green;
- led-upgrade = &led_health_red;
- serial0 = &uart0;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&pmx_btn_reset>;
- pinctrl-names = "default";
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&pmx_led_health_red &pmx_led_health_green>;
- pinctrl-names = "default";
-
- led_health_green: health-green {
- label = "on100:green:health";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- led_health_red: health-red {
- label = "on100:red:health";
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- };
-
- health2-green {
- label = "on100:green:health2";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- health2-red {
- label = "on100:red:health2";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- ethernet0-port at 0 {
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
- };
-};
-
-ð1 {
- status = "okay";
-
- ethernet1-port at 0 {
- phy-handle = <ðphy1>;
- phy-connection-type = "rgmii-id";
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy at 0 {
- /* Marvell 88E1121R */
- compatible = "ethernet-phy-id0141.0cb0",
- "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- ethphy1: ethernet-phy at 1 {
- /* Marvell 88E1121R */
- compatible = "ethernet-phy-id0141.0cb0",
- "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
-&nand {
- status = "okay";
-
- partition at 0 {
- label = "u-boot";
- reg = <0x00000000 0x000a0000>;
- read-only;
- };
-
- partition at a0000 {
- label = "u-boot environment";
- reg = <0x000a0000 0x00020000>;
- read-only;
- };
-
- partition at c0000 {
- label = "kernel";
- reg = <0x000c0000 0x00540000>;
- };
-
- partition at 600000 {
- label = "ubi";
- reg = <0x00600000 0x1fa00000>;
- };
-};
-
-&pinctrl {
- pmx_led_health_red: pmx-led-health-red {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
-
- pmx_led_health_green: pmx-led-health-green {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- pmx_led_health2_red: pmx-led-health2-red {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
-
- pmx_led_health2_green: pmx-led-health2-green {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
-
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp31";
- marvell,function = "gpio";
- };
-};
-
-&sdio {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-stora.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-stora.dts
deleted file mode 100644
index 577c009144..0000000000
--- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-stora.dts
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Device Tree file for NETGEAR Stora (MS2000/2110)
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno at natisbad.org>
- * Copyright (C) 2021, Zoltan HERPAI <wigyori at uid0.hu>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "NETGEAR Stora (MS2000/2110)";
- compatible = "netgear,stora", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory { /* 128 MB */
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- ocp at f1000000 {
- pinctrl: pin-controller at 10000 {
- pmx_button_power: pmx-button-power {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
-
- pmx_button_reset: pmx-button-reset {
- marvell,pins = "mpp38";
- marvell,function = "gpio";
- };
-
- pmx_led_blue_power: pmx-led-blue-power {
- marvell,pins = "mpp31";
- marvell,function = "gpio";
- };
-
- pmx_led_green_disk1: pmx-led-green-disk1 {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_led_green_disk2: pmx-led-green-disk2 {
- marvell,pins = "mpp20";
- marvell,function = "gpio";
- };
-
- pmx_led_red_disk1: pmx-led-red-disk1 {
- marvell,pins = "mpp23";
- marvell,function = "gpio";
- };
-
- pmx_led_red_disk2: pmx-led-red-disk2 {
- marvell,pins = "mpp22";
- marvell,function = "gpio";
- };
-
- pmx_poweroff: pmx-poweroff {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
- pmx_fan_tacho: pmx-fan-tacho {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
- };
-
- clocks {
- pcf8563_clk: pcf8563-oscillator {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <2048>;
- };
- };
-
- i2c at 11000 {
- status = "okay";
-
- tc654 at 1b {
- compatible = "microchip,tc654";
- reg = <0x1b>;
- };
-
- lm75 at 48 {
- compatible = "national,lm75";
- reg = <0x48>;
- };
-
- pcf8563 at 51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- };
-
- serial at 12000 {
- status = "okay";
- };
-
- sata at 80000 {
- status = "okay";
- phy-names = "port0", "port1";
- nr-ports = <2>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = < &pmx_led_blue_power
- &pmx_led_green_disk1 &pmx_led_green_disk2
- &pmx_led_red_disk1 &pmx_led_red_disk2 >;
- pinctrl-names = "default";
-
- led_power: power {
- label = "blue:power";
- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
- disk1 {
- label = "green:disk1";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata1";
- };
-
- disk2 {
- label = "green:disk2";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata2";
- };
-
- disk1_fail {
- label = "red:disk1_fail";
- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
- };
-
- disk2_fail {
- label = "red:disk2_fail";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_button_power &pmx_button_reset >;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_poweroff>;
- pinctrl-names = "default";
- gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <40>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0000000 0x0e0000>;
- read-only;
- };
-
- partition at e0000 {
- label = "u-boot-env";
- reg = <0x0e00000 0x020000>;
- };
-
- partition at 100000 {
- label = "ubi";
- reg = <0x0100000 0xff00000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy at 0 { /* Marvell 88E1318 */
- compatible = "marvell,88e1116";
- reg = <8>;
- };
-};
-
-ð0 {
- status = "okay";
-
- ethernet0-port at 0 {
- phy-handle = <ðphy0>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
More information about the lede-commits
mailing list