[openwrt/openwrt] ramips: add support for Rostelecom RT-FE-1A
LEDE Commits
lede-commits at lists.infradead.org
Thu Jan 4 12:47:06 PST 2024
hauke pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/18d7962f7b130ac9b873d6bb2c00c3ea6e2fa95f
commit 18d7962f7b130ac9b873d6bb2c00c3ea6e2fa95f
Author: Mikhail Zhilkin <csharper2005 at gmail.com>
AuthorDate: Sat Nov 25 12:14:57 2023 +0000
ramips: add support for Rostelecom RT-FE-1A
Rostelecom RT-FE-1A is a wireless WiFi 5 router manufactured by Sercomm
company.
Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB
Flash: 128 MiB
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615E): a/n/ac, 4x4
Ethernet: 5x GbE (WAN, LAN1, LAN2, LAN3, LAN4)
USB ports: No
Button: 2 buttons (Reset & WPS)
LEDs:
- 1x Power (green, unmanaged)
- 1x Status (green, gpio)
- 1x 2.4G (green, hardware, mt76-phy0)
- 1x 2.4G (blue, gpio)
- 1x 5G (green, hardware, mt76-phy1)
- 1x 5G (blue, gpio)
- 5x Ethernet (green, hardware, 4x LAN & WAN)
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot
Installation
-----------------
1. Login to the router web interface (default http://192.168.0.1/)
under "admin" account
2. Navigate to Settings -> Configuration -> Save to Computer
3. Decode the configuration. For example, using cfgtool.py tool (see
related section):
cfgtool.py -u configurationBackup.cfg
4. Open configurationBackup.xml and find the following block:
<OBJECT name="User." type="object" writable="1" encryption="0" >
<OBJECT name="1." type="object" writable="1" encryption="0" >
<PARAMETER name="Password" type="string" value="<some value>" writable="1" encryption="1" password="1" />
</OBJECT>
5. Replace <some value> by a new superadmin password and add a line
which enabling superadmin login after. For example, the block after
the changes:
<OBJECT name="User." type="object" writable="1" encryption="0" >
<OBJECT name="1." type="object" writable="1" encryption="0" >
<PARAMETER name="Password" type="string" value="s0meP at ss" writable="1" encryption="1" password="1" />
<PARAMETER name="Enable" type="boolean" value="1" writable="1" encryption="0"/>
</OBJECT>
6. Encode the configuration. For example, using cfgtool.py tool:
cfgtool.py -p configurationBackup.xml
7. Upload the changed configuration (configurationBackup_changed.cfg) to
the router
8. Login to the router web interface (superadmin:xxxxxxxxxx, where
xxxxxxxxxx is a new password from the p.5)
9. Enable SSH access to the router (Settings -> Access control -> SSH)
10. Connect to the router using SSH shell using superadmin account
11. Run in SSH shell:
sh
12. Make a mtd backup (optional, see related section)
13. Change bootflag to Sercomm1 and reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
reboot
14. Login to the router web interface under admin account
15. Remove dots from the OpenWrt factory image filename
16. Update firmware via web using OpenWrt factory image
Revert to stock
---------------
Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
cd /tmp
for i in 0 1 2 3 4 5 6 7 8 9; do nanddump -f mtd$i /dev/mtd$i; \
tftp -l mtd$i -p 192.168.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
tftp -l mtd.md5 -p 192.168.0.2
MAC Addresses
-------------
+-----+------------+---------+
| use | address | example |
+-----+------------+---------+
| LAN | label | f4:*:66 |
| WAN | label + 11 | f4:*:71 |
| 2g | label + 2 | f4:*:68 |
| 5g | label + 3 | f4:*:69 |
+-----+------------+---------+
The label MAC address was found in Factory, 0x21000
cfgtool.py
----------
A tool for decoding and encoding Sercomm configs.
Link: https://github.com/r3d5ky/sercomm_cfg_unpacker
Signed-off-by: Mikhail Zhilkin <csharper2005 at gmail.com>
(cherry picked from commit f3cdc9f9881796794c06f784a2e4790f5ed75d1f)
---
package/boot/uboot-envtools/files/ramips | 1 +
.../ramips/dts/mt7621_rostelecom_rt-fe-1a.dts | 266 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 14 ++
.../mt7621/base-files/lib/upgrade/platform.sh | 1 +
4 files changed, 282 insertions(+)
diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 83b54388e3..1df42c22ef 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -43,6 +43,7 @@ beeline,smartbox-giga|\
beeline,smartbox-turbo|\
beeline,smartbox-turbo-plus|\
etisalat,s3|\
+rostelecom,rt-fe-1a|\
rostelecom,rt-sf-1)
ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"
;;
diff --git a/target/linux/ramips/dts/mt7621_rostelecom_rt-fe-1a.dts b/target/linux/ramips/dts/mt7621_rostelecom_rt-fe-1a.dts
new file mode 100644
index 0000000000..8afe5f5485
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_rostelecom_rt-fe-1a.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "rostelecom,rt-fe-1a", "mediatek,mt7621-soc";
+ model = "Rostelecom RT-FE-1A";
+
+ aliases {
+ label-mac-device = &gmac0;
+
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <50>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <24>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_status_green: led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ button-0 {
+ label = "wps";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ button-1 {
+ label = "reset";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ ubi-concat {
+ compatible = "mtd-concat";
+ devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 \
+ &ubiconcat3>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "ubi";
+ reg = <0x0 0x5420000>;
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "sercomm,sc-partitions", "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ sercomm,scpart-id = <0>;
+ read-only;
+ };
+
+ partition at 100000 {
+ label = "dynamic partition map";
+ reg = <0x100000 0x100000>;
+ sercomm,scpart-id = <1>;
+ read-only;
+ };
+
+ partition at 200000 {
+ label = "Factory";
+ reg = <0x200000 0x100000>;
+ sercomm,scpart-id = <2>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_2g: eeprom at 0 {
+ reg = <0x0 0x400>;
+ };
+
+ eeprom_5g: eeprom at 8000 {
+ reg = <0x8000 0x4da8>;
+ };
+
+ macaddr_label: macaddr at 21000 {
+ compatible = "mac-base";
+ reg = <0x21000 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition at 300000 {
+ label = "Boot Flag";
+ reg = <0x300000 0x100000>;
+ sercomm,scpart-id = <3>;
+ };
+
+ partition at 400000 {
+ label = "kernel";
+ reg = <0x400000 0x600000>;
+ sercomm,scpart-id = <4>;
+ };
+
+ partition at a00000 {
+ label = "Kernel 2";
+ reg = <0xa00000 0x600000>;
+ sercomm,scpart-id = <5>;
+ read-only;
+ };
+
+ ubiconcat0: partition at 1000000 {
+ label = "File System 1";
+ reg = <0x1000000 0x1800000>;
+ sercomm,scpart-id = <6>;
+ };
+
+ partition at 2800000 {
+ label = "File System 2";
+ reg = <0x2800000 0x1800000>;
+ sercomm,scpart-id = <7>;
+ read-only;
+ };
+
+ ubiconcat1: partition at 4000000 {
+ label = "Configuration/log";
+ reg = <0x4000000 0x800000>;
+ sercomm,scpart-id = <8>;
+ };
+
+ ubiconcat2: partition at 4800000 {
+ label = "application tmp buffer (Ftool)";
+ reg = <0x4800000 0xc00000>;
+ sercomm,scpart-id = <9>;
+ };
+
+ ubiconcat3: partition at 5400000 {
+ label = "free space (in stock firmware)";
+ reg = <0x5400000 0x2820000>;
+ sercomm,scpart-id = <10>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ nvmem-cells = <&eeprom_5g>, <&macaddr_label 3>;
+ nvmem-cell-names = "eeprom", "mac-address";
+
+ led {
+ led-active-low;
+ };
+ };
+};
+
+&pcie1 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <2400000 2500000>;
+
+ nvmem-cells = <&eeprom_2g>, <&macaddr_label 2>;
+ nvmem-cell-names = "eeprom", "mac-address";
+
+ led {
+ led-active-low;
+ };
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_label 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy0>;
+
+ nvmem-cells = <&macaddr_label 11>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ ethphy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
+&switch0 {
+ ports {
+ port at 1 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port at 2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port at 3 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port at 4 {
+ status = "okay";
+ label = "lan4";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "uart2", "uart3", "wdt";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index e20a3e99aa..52968b482f 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1947,6 +1947,20 @@ define Device/renkforce_ws-wn530hp3-a
endef
TARGET_DEVICES += renkforce_ws-wn530hp3-a
+define Device/rostelecom_rt-fe-1a
+ $(Device/sercomm_dxx)
+ IMAGE_SIZE := 24576k
+ SERCOMM_HWID := CX4
+ SERCOMM_HWVER := 11300
+ SERCOMM_SWVER := 2010
+ DEVICE_VENDOR := Rostelecom
+ DEVICE_MODEL := RT-FE-1A
+ DEVICE_ALT0_VENDOR := Sercomm
+ DEVICE_ALT0_MODEL := RT-FE-1A
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware
+endef
+TARGET_DEVICES += rostelecom_rt-fe-1a
+
define Device/rostelecom_rt-sf-1
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 5d8305b788..e212c688ec 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -102,6 +102,7 @@ platform_do_upgrade() {
netgear,wax202|\
netis,wf2881|\
raisecom,msg1500-x-00|\
+ rostelecom,rt-fe-1a|\
rostelecom,rt-sf-1|\
sercomm,na502|\
sercomm,na502s|\
More information about the lede-commits
mailing list