[openwrt/openwrt] uboot-mediatek: add build for BPi-R4
LEDE Commits
lede-commits at lists.infradead.org
Thu Feb 15 11:35:05 PST 2024
dangole pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/54f99ebe5cceccafcc85bc0486a4b06c78bc9dd0
commit 54f99ebe5cceccafcc85bc0486a4b06c78bc9dd0
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Tue Jul 25 02:56:01 2023 +0100
uboot-mediatek: add build for BPi-R4
Add build for the BananaPi R4 board which can boot from micro SD,
SPI-NAND or eMMC.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
package/boot/uboot-mediatek/Makefile | 39 +
.../uboot-mediatek/patches/450-add-bpi-r4.patch | 998 +++++++++++++++++++++
2 files changed, 1037 insertions(+)
diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile
index de19b10207..9b421d2999 100644
--- a/package/boot/uboot-mediatek/Makefile
+++ b/package/boot/uboot-mediatek/Makefile
@@ -500,6 +500,42 @@ define U-Boot/mt7986_zyxel_ex5601-t0
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-4k-ddr4
endef
+define U-Boot/mt7988_bananapi_bpi-r4-emmc
+ NAME:=BananaPi BPi-R4
+ BUILD_SUBTARGET:=filogic
+ BUILD_DEVICES:=bananapi_bpi-r4
+ UBOOT_CONFIG:=mt7988a_bananapi_bpi-r4-emmc
+ UBOOT_IMAGE:=u-boot.fip
+ BL2_BOOTDEV:=emmc
+ BL2_SOC:=mt7988
+ BL2_DDRTYPE:=comb
+ DEPENDS:=+trusted-firmware-a-mt7988-emmc-comb
+endef
+
+define U-Boot/mt7988_bananapi_bpi-r4-sdmmc
+ NAME:=BananaPi BPi-R4
+ BUILD_SUBTARGET:=filogic
+ BUILD_DEVICES:=bananapi_bpi-r4
+ UBOOT_CONFIG:=mt7988a_bananapi_bpi-r4-sdmmc
+ UBOOT_IMAGE:=u-boot.fip
+ BL2_BOOTDEV:=sdmmc
+ BL2_SOC:=mt7988
+ BL2_DDRTYPE:=comb
+ DEPENDS:=+trusted-firmware-a-mt7988-sdmmc-comb
+endef
+
+define U-Boot/mt7988_bananapi_bpi-r4-snand
+ NAME:=BananaPi BPi-R4
+ BUILD_SUBTARGET:=filogic
+ BUILD_DEVICES:=bananapi_bpi-r4
+ UBOOT_CONFIG:=mt7988a_bananapi_bpi-r4-snand
+ UBOOT_IMAGE:=u-boot.fip
+ BL2_BOOTDEV:=spim-nand-ubi
+ BL2_SOC:=mt7988
+ BL2_DDRTYPE:=comb
+ DEPENDS:=+trusted-firmware-a-mt7988-spim-nand-ubi-comb
+endef
+
define U-Boot/mt7988_rfb-spim-nand
NAME:=MT7988 Reference Board
BUILD_SUBTARGET:=filogic
@@ -604,6 +640,9 @@ UBOOT_TARGETS := \
mt7986_xiaomi_redmi-router-ax6000 \
mt7986_zyxel_ex5601-t0 \
mt7986_rfb \
+ mt7988_bananapi_bpi-r4-emmc \
+ mt7988_bananapi_bpi-r4-sdmmc \
+ mt7988_bananapi_bpi-r4-snand \
mt7988_rfb-spim-nand \
mt7988_rfb-snand \
mt7988_rfb-nor \
diff --git a/package/boot/uboot-mediatek/patches/450-add-bpi-r4.patch b/package/boot/uboot-mediatek/patches/450-add-bpi-r4.patch
new file mode 100644
index 0000000000..0f08c03294
--- /dev/null
+++ b/package/boot/uboot-mediatek/patches/450-add-bpi-r4.patch
@@ -0,0 +1,998 @@
+--- /dev/null
++++ b/configs/mt7988a_bananapi_bpi-r4-emmc_defconfig
+@@ -0,0 +1,180 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_SYS_PROMPT="MT7988> "
++CONFIG_TARGET_MT7988=y
++CONFIG_DEBUG_UART_BASE=0x11000000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x50000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_DEFAULT_DEVICE_TREE="mt7988a-bananapi-bpi-r4-emmc"
++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r4_emmc_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7988a-bpi-r4-emmc.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_OF_SYSTEM_SETUP=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MMC=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MMC=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_MTK_AHCI=y
++CONFIG_PCI=y
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_MMC=y
++CONFIG_MMC_DEFAULT_DEV=1
++CONFIG_MMC_SUPPORTS_TUNING=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_ENV_OFFSET_REDUND=0x440000
++CONFIG_ENV_SIZE=0x40000
++CONFIG_ENV_SIZE_REDUND=0x40000
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7988=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++#CONFIG_MTK_SNOR=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_SPI_FLASH_WINBOND=y
++# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
++CONFIG_CMD_SF=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/configs/mt7988a_bananapi_bpi-r4-sdmmc_defconfig
+@@ -0,0 +1,180 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_SYS_PROMPT="MT7988> "
++CONFIG_TARGET_MT7988=y
++CONFIG_DEBUG_UART_BASE=0x11000000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x50000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_DEFAULT_DEVICE_TREE="mt7988a-bananapi-bpi-r4-sd"
++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r4_sdmmc_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7988a-bpi-r4-sd.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_OF_SYSTEM_SETUP=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MMC=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MMC=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_MTK_AHCI=y
++CONFIG_PCI=y
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_MMC=y
++CONFIG_MMC_DEFAULT_DEV=1
++CONFIG_MMC_SUPPORTS_TUNING=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_ENV_OFFSET_REDUND=0x440000
++CONFIG_ENV_SIZE=0x40000
++CONFIG_ENV_SIZE_REDUND=0x40000
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7988=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++#CONFIG_MTK_SNOR=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_SPI_FLASH_WINBOND=y
++# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
++CONFIG_CMD_SF=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/configs/mt7988a_bananapi_bpi-r4-snand_defconfig
+@@ -0,0 +1,182 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_SYS_PROMPT="MT7988> "
++CONFIG_TARGET_MT7988=y
++CONFIG_DEBUG_UART_BASE=0x11000000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x50000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_DEFAULT_DEVICE_TREE="mt7988a-bananapi-bpi-r4-emmc"
++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r4_snand_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7988a-bpi-r4-emmc.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_OF_SYSTEM_SETUP=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MMC=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MMC=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_MTK_AHCI=y
++CONFIG_PCI=y
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL_MT7988=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_MMC=y
++CONFIG_MMC_DEFAULT_DEV=1
++CONFIG_MMC_SUPPORTS_TUNING=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7988=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++#CONFIG_MTK_SNOR=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_SPI_FLASH_WINBOND=y
++# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
++CONFIG_CMD_SF=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/bananapi_bpi-r4_sdmmc_env
+@@ -0,0 +1,66 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x50000000
++bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
++bootconf=config-mt7988a-bananapi-bpi-r4
++bootconf_sd=mt7988a-bananapi-bpi-r4-sd
++bootconf_emmc=mt7988a-bananapi-bpi-r4-emmc
++bootconf_extra=
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-bananapi_bpi-r4-initramfs-recovery.itb
++bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r4-squashfs-sysupgrade.itb
++bootled_pwr=green:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title= [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) ) [0;36m[SD card][0m
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from SD card.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from SD card.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=[31mInstall bootloader, recovery and production to NAND.[0m=if nand info ; then run ubi_init ; else echo "NAND not detected" ; fi ; run bootmenu_confirm_return
++bootmenu_7=Reboot.=reset
++bootmenu_8=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run sdmmc_read_production && bootm $loadaddr#$bootconf#$bootconf_sd#$bootconf_extra ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run sdmmc_read_recovery && bootm $loadaddr#$bootconf#$bootconf_emmc ; led $bootled_rec off
++boot_sdmmc=run boot_production ; run boot_recovery
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run sdmmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_sd#$bootconf_extra ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run sdmmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_sd ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf#$bootconf_sd
++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
++mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
++part_default=production
++part_recovery=recovery
++reset_factory=eraseenv && reset
++sdmmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
++sdmmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
++sdmmc_read_snand_bl2=part start mmc 0 install part_addr && mmc read $loadaddr $part_addr 0x400
++sdmmc_read_snand_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x800 && mmc read $loadaddr $offset 0x1000
++sdmmc_read_emmc_install=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3800 && mmc read $loadaddr $offset 0x4000
++sdmmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
++sdmmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
++snand_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr 0x0 0x80000 && mtd write bl2 $loadaddr 0x80000 0x80000 && mtd write bl2 $loadaddr 0x100000 0x80000 && mtd write bl2 $loadaddr 0x180000 0x80000
++ubi_create_env=ubi create ubootenv 0x100000 dynamic 1 ; ubi create ubootenv2 0x100000 dynamic 2
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi
++ubi_init=run ubi_format && run ubi_init_bl && run ubi_create_env && run ubi_init_openwrt && run ubi_init_emmc_install
++ubi_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run ubi_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run ubi_write_production
++ubi_init_bl=run sdmmc_read_snand_bl2 && run snand_write_bl2 && run sdmmc_read_snand_fip && run ubi_write_fip
++ubi_init_emmc_install=run sdmmc_read_emmc_install && run ubi_write_emmc_install
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_fip=ubi check fip && ubi remove fip ; ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000
++ubi_write_emmc_install=ubi check emmc_install && ubi remove emmc_install ; ubi create emmc_install 0x800000 dynamic ; ubi write $loadaddr emmc_install 0x800000
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m"
+--- /dev/null
++++ b/bananapi_bpi-r4_snand_env
+@@ -0,0 +1,67 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x50000000
++bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 ubi.block=0,fit
++bootconf=config-mt7988a-bananapi-bpi-r4
++bootconf_extra=mt7988a-bananapi-bpi-r4-emmc
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-bananapi_bpi-r4-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r4-snand-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r4-snand-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r4-squashfs-sysupgrade.itb
++bootled_pwr=green:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title= [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) ) [0;36m[SPI-NAND][0m
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=[31mLoad BL2 preloader via TFTP then write to NAND.[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=[31mInstall bootloader, recovery and production to eMMC.[0m=if mmc partconf 0 ; then run emmc_init ; else echo "eMMC not detected" ; fi ; run bootmenu_confirm_return
++bootmenu_9=Reboot.=reset
++bootmenu_10=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf#$bootconf_extra ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_extra ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++snand_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr 0x0 0x80000 && mtd write bl2 $loadaddr 0x80000 0x80000 && mtd write bl2 $loadaddr 0x100000 0x80000 && mtd write bl2 $loadaddr 0x180000 0x80000
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 1 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 2
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_read_emmc_install=ubi check emmc_install && ubi read $loadaddr emmc_install
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_fip=ubi check fip && ubi remove fip ; ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
++emmc_init=mmc dev 0 && mmc bootbus 0 0 0 0 && run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv
++emmc_init_bl=run ubi_read_emmc_install && setenv fileaddr $loadaddr && run emmc_write_bl2 && setexpr fileaddr $loadaddr + 0x100000 && run emmc_write_fip && setexpr fileaddr $loadaddr + 0x500000 && run emmc_write_hdr
++emmc_init_openwrt=run ubi_read_recovery && iminfo $loadaddr && run emmc_write_recovery ; run ubi_read_production && iminfo $loadaddr && run emmc_write_production
++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
++emmc_write_hdr=mmc erase 0x0 0x40 && mmc write $fileaddr 0x0 0x40
++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m"
+--- /dev/null
++++ b/bananapi_bpi-r4_emmc_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x50000000
++bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
++bootconf=config-mt7988a-bananapi-bpi-r4
++bootconf_base=config-mt7988a-bananapi-bpi-r4
++bootconf_emmc=mt7988a-bananapi-bpi-r4-emmc
++bootconf_extra=
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-bananapi_bpi-r4-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r4-emmc-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r4-emmc-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r4-squashfs-sysupgrade.itb
++bootled_pwr=green:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title= [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) ) [0;36m[eMMC][0m
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=[31mLoad BL31+U-Boot FIP via TFTP then write to eMMC.[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=[31mLoad BL2 preloader via TFTP then write to eMMC.[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf#$bootconf_emmc#$bootconf_extra ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf#$bootconf_emmc#$bootconf_extra ; led $bootled_rec off
++boot_emmc=run boot_production ; run boot_recovery
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_emmc#$bootconf_extra ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_emmc ; fi
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
++mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
++part_default=production
++part_recovery=recovery
++reset_factory=eraseenv && reset
++emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
++emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m"
+--- /dev/null
++++ b/arch/arm/dts/mt7988a-bananapi-bpi-r4.dtsi
+@@ -0,0 +1,199 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih at mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7988.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++ model = "Bananapi BPI-R4";
++ compatible = "bananapi,bpi-r4", "mediatek,mt7988";
++
++ chosen {
++ stdout-path = &uart0;
++ };
++
++ memory at 40000000 {
++ device_type = "memory";
++ reg = <0 0x40000000 0 0x10000000>;
++ };
++
++ reg_3p3v: regulator-3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-3.3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ reg_1p8v: regulator-1p8v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-1.8V";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ keys {
++ compatible = "gpio-keys";
++
++ wps {
++ label = "reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led_status_green: led-green {
++ label = "green:status";
++ gpios = <&gpio 79 GPIO_ACTIVE_HIGH>;
++ };
++
++ led_status_blue: led-blue {
++ label = "blue:status";
++ gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
++ };
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins>;
++ status = "okay";
++};
++
++ð {
++ status = "okay";
++ mediatek,gmac-id = <0>;
++ phy-mode = "usxgmii";
++ mediatek,switch = "mt7988";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ };
++};
++
++&pinctrl {
++ i2c1_pins: i2c1-pins {
++ mux {
++ function = "i2c";
++ groups = "i2c1_0";
++ };
++ };
++
++ pwm_pins: pwm-pins {
++ mux {
++ function = "pwm";
++ groups = "pwm0", "pwm1", "pwm2", "pwm3", "pwm4",
++ "pwm5", "pwm6", "pwm7";
++ };
++ };
++
++ spi0_pins: spi0-pins {
++ mux {
++ function = "spi";
++ groups = "spi0", "spi0_wp_hold";
++ };
++ };
++
++ mmc0_pins_default: mmc0default {
++ mux {
++ function = "flash";
++ groups = "emmc_51";
++ };
++
++ conf-cmd-dat {
++ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
++ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
++ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
++ input-enable;
++ };
++
++ conf-clk {
++ pins = "EMMC_CK";
++ };
++
++ conf-dsl {
++ pins = "EMMC_DSL";
++ };
++
++ conf-rst {
++ pins = "EMMC_RSTB";
++ };
++ };
++
++ mmc1_pins_default: mmc1default {
++ mux {
++ function = "flash";
++ groups = "emmc_45";
++ };
++
++ conf-cmd-dat {
++ pins = "SPI2_CSB", "SPI2_MISO", "SPI2_MOSI",
++ "SPI2_CLK", "SPI2_HOLD";
++ input-enable;
++ };
++
++ conf-clk {
++ pins = "SPI2_WP";
++ };
++ };
++};
++
++&pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm_pins>;
++ status = "okay";
++};
++
++&spi0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi0_pins>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++ must_tx;
++ enhance_timing;
++ dma_ext;
++ ipm_design;
++ support_quad;
++ tick_dly = <2>;
++ sample_sel = <0>;
++
++ spi_nand at 0 {
++ compatible = "spi-nand";
++ reg = <0>;
++ spi-max-frequency = <52000000>;
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition at 0 {
++ label = "bl2";
++ reg = <0x0 0x200000>;
++ };
++
++ partition at 200000 {
++ label = "ubi";
++ reg = <0x200000 0x7e00000>;
++ compatible = "linux,ubi";
++ };
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm/dts/mt7988a-bananapi-bpi-r4-sd.dts
+@@ -0,0 +1,19 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih at mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7988a-bananapi-bpi-r4.dtsi"
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc1_pins_default>;
++ max-frequency = <52000000>;
++ bus-width = <4>;
++ cap-sd-highspeed;
++ vmmc-supply = <®_3p3v>;
++ vqmmc-supply = <®_3p3v>;
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/dts/mt7988a-bananapi-bpi-r4-emmc.dts
+@@ -0,0 +1,21 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih at mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7988a-bananapi-bpi-r4.dtsi"
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_default>;
++ max-frequency = <52000000>;
++ bus-width = <8>;
++ cap-mmc-highspeed;
++ cap-mmc-hw-reset;
++ vmmc-supply = <®_3p3v>;
++ vqmmc-supply = <®_1p8v>;
++ non-removable;
++ status = "okay";
++};
More information about the lede-commits
mailing list