[openwrt/openwrt] ath79: Create shared dtsi for DIR-859

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/6ea910ab54ffc0640f4e7fc977c1e076f4e86323

commit 6ea910ab54ffc0640f4e7fc977c1e076f4e86323
Author: Jan Forman <jforman at tuta.io>
AuthorDate: Sat May 15 20:51:14 2021 +0200

    ath79: Create shared dtsi for DIR-859
    
    Create a shared dtsi for the dir-859 and similarly device, it similarly as it done for the dir-842.
    
    Signed-off-by: Jan Forman <jforman at tuta.io>
---
 .../linux/ath79/dts/qca9563_dlink_dir-859-a1.dts   | 113 +--------------------
 ...ir-859-a1.dts => qca9563_dlink_dir-8x9-a1.dtsi} |  34 -------
 2 files changed, 1 insertion(+), 146 deletions(-)

diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
index 140f0b65c6..a828f86cb1 100644
--- a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
@@ -1,9 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca956x.dtsi"
-
+#include "qca9563_dlink_dir-8x9-a1.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
 
 / {
 	model = "D-Link DIR-859 A1";
@@ -40,113 +38,4 @@
 			linux,default-trigger = "phy0tpt";
 		};
 	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		reset {
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&spi {
-	status = "okay";
-
-	flash at 0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "bootloader";
-				reg = <0x000000 0x40000>;
-				read-only;
-			};
-
-			partition at 40000 {
-				label = "bdcfg";
-				reg = <0x040000 0x10000>;
-				read-only;
-			};
-
-			partition at 50000 {
-				label = "devdata";
-				reg = <0x050000 0x10000>;
-				read-only;
-			};
-
-			partition at 60000 {
-				label = "devconf";
-				reg = <0x060000 0x10000>;
-				read-only;
-			};
-
-			partition at 70000 {
-				compatible = "seama";
-				label = "firmware";
-				reg = <0x070000 0xf80000>;
-			};
-
-			art: partition at ff0000 {
-				label = "art";
-				reg = <0xff0000 0x010000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	phy0: ethernet-phy at 0 {
-		reg = <0>;
-		phy-mode = "sgmii";
-		qca,mib-poll-interval = <500>;
-
-		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-
-		qca,ar8327-initvals = <
-			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRAP */
-			0x50 0xcc35cc35 /* LED_CTRL0 */
-			0x54 0xcb37cb37 /* LED_CTRL1 */
-			0x58 0x00000000 /* LED_CTRL2 */
-			0x5c 0x00f3cf00 /* LED_CTRL3 */
-			0x7c 0x0000007e /* PORT0_STATUS */
-			>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	pll-data = <0x03000101 0x00000101 0x00001919>;
-
-	phy-mode = "sgmii";
-	phy-handle = <&phy0>;
-};
-
-&wmac {
-	status = "okay";
-
-	qca,no-eeprom;
 };
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
similarity index 75%
copy from target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
copy to target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
index 140f0b65c6..65948ecb22 100644
--- a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
@@ -6,40 +6,6 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	model = "D-Link DIR-859 A1";
-	compatible = "dlink,dir-859-a1", "qca,qca9563";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wps {
-			label = "green:wps";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-
-		led_power: power {
-			label = "green:power";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-
-		internet {
-			label = "green:internet";
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan {
-			label = "green:wlan";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-	};
 
 	keys {
 		compatible = "gpio-keys";