[openwrt/openwrt] ath79: Replace reset-button for DIR-859

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/7a29230752f232487107b2e0d54fe1f63e733b59

commit 7a29230752f232487107b2e0d54fe1f63e733b59
Author: Jan Forman <forman.jan96 at gmail.com>
AuthorDate: Sat May 15 20:48:12 2021 +0200

    ath79: Replace reset-button for DIR-859
    
    gpio-export for the switch reset pin replaced with a reset pin definition for the driver, within the phy node.
    
    Signed-off-by: Jan Forman <forman.jan96 at gmail.com>
    Tested-By: Sebastian Schaper <openwrt at sebastianschaper.net>
---
 target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
index 804f3434c3..140f0b65c6 100644
--- a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
@@ -56,17 +56,6 @@
 			debounce-interval = <60>;
 		};
 	};
-
-	gpio-export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		gpio_switch_reset {
-			gpio-export,name = "dir-859-a1:reset:switch";
-			gpio-export,output = <1>;
-			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &pcie {
@@ -133,6 +122,8 @@
 		phy-mode = "sgmii";
 		qca,mib-poll-interval = <500>;
 
+		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+
 		qca,ar8327-initvals = <
 			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 			0x10 0x81000080 /* POWER_ON_STRAP */