[openwrt/openwrt] ramips: mt7621: add support for Zbtlink ZBT-WG1608 (32M)

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch openwrt-23.05:
https://git.openwrt.org/0a63e72fbbf9dce54e9425f7f9eba1421bf777c4

commit 0a63e72fbbf9dce54e9425f7f9eba1421bf777c4
Author: Kim DoHyoung <azusahmr at k-on.kr>
AuthorDate: Thu Aug 11 08:13:35 2022 +0000

    ramips: mt7621: add support for Zbtlink ZBT-WG1608 (32M)
    
    Zbtlink ZBT-WG1608 is a Wi-Fi router intendent to use with WWAN (4G/5G)
    modems.
    
    Specifications:
    * SoC: MediaTek MT7621A
    * RAM: 256/512 MiB
    * Flash: 16/32 MiB (SPI NOR)
    * Wi-Fi:
      * MediaTek MT7603E : 2.4Ghz
      * MediaTek MT7613BE : 5Ghz
    * Ethernet: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN)
    * M.2: 1x slot with USB&SIM
      * EM7455/EM12-G/EM160R/RM500Q-AE
    * USB: 1x 3.0 Type-A port
    * External storage: 1x microSD (SDXC) slot
    * UART: console (115200 baud)
    * LED:
      * 1 power indicator
      * 1 WLAN 2.4G controlled (wlan 2G)
      * 3 SoC controlled (wlan 5G, wwan, internet)
      * 5 per Eth phy (4xLAN + WAN)
    
    MAC Addresses:
    * LAN    : f8:5e:3c:xx:xx:e0 (Factory, 0xe000 (hex))
    * WAN    : f8:5e:3c:xx:xx:e1 (Factory, 0xe006 (hex))
    * 2.4 GHz: f8:5e:3c:xx:xx:de (Factory, 0x0004 (hex))
    * 5 GHz  : f8:5e:3c:xx:xx:df (Factory, 0x8004 (hex))
    
    Installation:
    * Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can
      be directly used to install OpenWrt. Firmware must be upgraded using the
      'force' and 'do not save configuration' command line options (or
      correspondig web interface checkboxes) since the vendor firmware is from
      the pre-DSA era.
    
    Recovery Mode:
     * Press reset button, power up the device, wait for about 10sec.
     * Upload sysupgrade image through the firmware recovery mode web page at
      192.168.1.1.
    
    Signed-off-by: Kim DoHyoung <azusahmr at k-on.kr>
    (cherry picked from commit 0bbd5699c81d6887c4d895e85b56d8c23b1211ec)
---
 .../linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts   | 16 ++++++++++++++++
 target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi   |  2 +-
 target/linux/ramips/image/mt7621.mk                      | 12 ++++++++++++
 3 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts
new file mode 100644
index 0000000000..00feec2ff3
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_zbtlink_zbt-wg1608.dtsi"
+
+/ {
+	compatible = "zbtlink,zbt-wg1608-32m", "mediatek,mt7621-soc";
+	model = "Zbtlink ZBT-WG1608 (32M)";
+};
+
+&flash0 {
+	broken-flash-reset;
+};
+
+&firmware {
+	reg = <0x50000 0x1fb0000>;
+};
diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
index 59fab90ed1..303708fab0 100644
--- a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
+++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
@@ -61,7 +61,7 @@
 &spi0 {
 	status = "okay";
 
-	flash at 0 {
+	flash0: flash at 0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index b8fa0cefdb..a5b69839a7 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -2706,6 +2706,18 @@ define Device/zbtlink_zbt-wg1608-16m
 endef
 TARGET_DEVICES += zbtlink_zbt-wg1608-16m
 
+define Device/zbtlink_zbt-wg1608-32m
+  $(Device/dsa-migration)
+  $(Device/uimage-lzma-loader)
+  IMAGE_SIZE := 32448k
+  DEVICE_VENDOR := Zbtlink
+  DEVICE_MODEL := ZBT-WG1608
+  DEVICE_VARIANT := 32M
+  DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \
+	kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += zbtlink_zbt-wg1608-32m
+
 define Device/zbtlink_zbt-wg2626
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)