[openwrt/openwrt] ramips: Add support for ComFast CF-E390AX
LEDE Commits
lede-commits at lists.infradead.org
Sat Jul 1 07:21:08 PDT 2023
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/f24c9b9d863c2635e472e83028d28cc8d0a7c7c6
commit f24c9b9d863c2635e472e83028d28cc8d0a7c7c6
Author: Usama Nassir <usama.nassir at gmail.com>
AuthorDate: Fri May 19 03:35:51 2023 +0300
ramips: Add support for ComFast CF-E390AX
Add support for ComFast CF-E390AX. It is a 802.11 wifi6 cieling AP, based on MediaTek MT7261AT.
Specifications:
SoC: MediaTek MT7621AT
RAM: 128 MiB
Flash: 16 MiB NOR (Macronix mx25l12805d)
Wireless: MT7915E (2.4G) 802.11ax/b/g/n MT7915E (5G) 802.11ac/ax/n
Ethernet: 2 x 1Gbs
Button: 1 x "Reset" button
LED: 1x Blue LED + 1x Red LED + 1x green LED
Power: PoE
Manufacturer Page:
http://en.comfast.com.cn/index.php?m=content&c=index&a=show&catid=84&id=75
Flash Layout:
0x000000000000-0x000000030000 : "bootloader"
0x000000030000-0x000000040000 : "config"
0x000000050000-0x000000060000 : "factory"
0x000000090000-0x000001000000 : "firmware"
First install:
1. Set device into http firmware fail safe upload mode by pressing the reset button for 10 seconds while powering
it on. Once the LED stops flashing, safe mode will be running.
2. Set PC IP address to 192.168.1.2
3. Browse to 192.168.1.1 and upload the factory image using the web interface.
Signed-off-by: Usama Nassir <usama.nassir at gmail.com>
---
.../linux/ramips/dts/mt7621_comfast_cf-e390ax.dts | 135 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 14 +++
.../mt7621/base-files/etc/board.d/02_network | 8 ++
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 4 +
4 files changed, 161 insertions(+)
diff --git a/target/linux/ramips/dts/mt7621_comfast_cf-e390ax.dts b/target/linux/ramips/dts/mt7621_comfast_cf-e390ax.dts
new file mode 100644
index 0000000000..80600470e7
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_comfast_cf-e390ax.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "comfast,cf-e390ax", "mediatek,mt7621-soc";
+ model = "COMFAST CF-E390AX";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie1 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <14000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 50000 {
+ label = "factory";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition at 90000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x90000 0xf70000>;
+ };
+ };
+ };
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr at e000 {
+ reg = <0xe000 0x6>;
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+ ports {
+ port at 0 {
+ status = "okay";
+ label = "wan";
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+ };
+
+ port at 4 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 4dc7607126..92053e087c 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -501,6 +501,20 @@ define Device/bolt_arion
endef
TARGET_DEVICES += bolt_arion
+define Device/comfast_cf-e390ax
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 15808k
+ DEVICE_VENDOR := ComFast
+ DEVICE_MODEL := CF-E390AX
+ DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ check-size | append-metadata
+ IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
+endef
+TARGET_DEVICES += comfast_cf-e390ax
+
define Device/cudy_m1800
$(Device/dsa-migration)
DEVICE_VENDOR := Cudy
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 180713d964..a5671af82f 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -143,6 +143,9 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0"
;;
+ comfast,cf-e390ax)
+ ucidef_set_interfaces_lan_wan "lan" "wan"
+ ;;
*)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
@@ -186,6 +189,11 @@ ramips_setup_macs()
lan_mac=$wan_mac
label_mac=$wan_mac
;;
+ comfast,cf-e390ax)
+ lan_mac=$(cat /sys/class/net/eth0/address)
+ label_mac=$lan_mac
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
dlink,dir-860l-b1)
lan_mac=$(mtd_get_mac_ascii factory lanmac)
wan_mac=$(mtd_get_mac_ascii factory wanmac)
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index b36ac028b0..351aa396e9 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -27,6 +27,10 @@ case "$board" in
hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
;;
+ comfast,cf-e390ax)
+ [ "$PHYNBR" = "0" ] && echo -n "$(mtd_get_mac_binary factory 0x0004)" > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && echo -n "$(mtd_get_mac_binary factory 0x8004)" > /sys${DEVPATH}/macaddress
+ ;;
cudy,x6-v1|\
cudy,x6-v2)
hw_mac_addr="$(mtd_get_mac_binary bdinfo 0xde00)"
More information about the lede-commits
mailing list