[openwrt/openwrt] ath79: add support for COMFAST CF-E380AC v2
LEDE Commits
lede-commits at lists.infradead.org
Sat Jul 1 07:13:04 PDT 2023
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/935a63c59d634ee384635003391b65399097f683
commit 935a63c59d634ee384635003391b65399097f683
Author: Joao Henrique Albuquerque <joaohccalbu at gmail.com>
AuthorDate: Sun May 21 21:39:14 2023 -0300
ath79: add support for COMFAST CF-E380AC v2
COMFAST CF-E380AC v2 is a ceiling mount AP with PoE
support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035.
There are two versions of this model, with different RAM
and U-Boot mtd partition sizes:
- v1: 128 MB of RAM, 128 KB U-Boot image size
- v2: 256 MB of RAM, 256 KB U-Boot image size
Version number is available only inside vendor GUI,
hardware and markings are the same.
Short specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 1x 10/100/1000 Mbps Ethernet, with PoE support
- 128 or 256 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm
- 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm
- 6x internal antennas
- 1x RGB LED, 1x button
- UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
COMFAST MAC addresses :
Though the OEM firmware has four adresses in the usual locations,
it appears that the assigned addresses are just incremented in a different way:
Interface address location
Lan *:00 0x0
2.4g *:0A n/a (0x0 + 10)
5g *:02 0x6
Unused Addresses found in ART hexdump
address location
*:01 0x1002
*:03 0x5006
To keep code consistency the MAC address assignments are made based on increments of the one found in 0x0;
Signed-off-by: Joao Henrique Albuquerque <joaohccalbu at gmail.com>
---
.../ath79/dts/qca9558_comfast_cf-e380ac-v2.dts | 150 +++++++++++++++++++++
.../ath79/generic/base-files/etc/board.d/01_leds | 1 +
.../generic/base-files/etc/board.d/02_network | 2 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
target/linux/ath79/image/generic.mk | 11 ++
5 files changed, 165 insertions(+)
diff --git a/target/linux/ath79/dts/qca9558_comfast_cf-e380ac-v2.dts b/target/linux/ath79/dts/qca9558_comfast_cf-e380ac-v2.dts
new file mode 100644
index 0000000000..b38e2e848f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_comfast_cf-e380ac-v2.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-e380ac-v2", "qca,qca9558";
+ model = "COMFAST CF-E380AC";
+
+ aliases {
+ serial0 = &uart;
+ label-mac-device = ð1;
+ led-boot = &led_lan;
+ led-failsafe = &led_lan;
+ led-upgrade = &led_lan;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ led_lan: lan {
+ label = "green:lan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "red:wlan5g";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <1200>;
+ always-running;
+ };
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x0>;
+};
+
+
+&spi {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ art: partition at 40000 {
+ label = "art";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x0fa0000>;
+ };
+
+ partition at ff0000 {
+ label = "art-backup";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ pll-data = <0xbe000000 0xb0000101 0xb0001313>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <10>;
+};
+
+&art {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr at 0 {
+ reg = <0x0 0x6>;
+ };
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 65cf7b3292..00bcad2bc5 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -445,6 +445,7 @@ tplink,cpe510-v3)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:link3" "wlan0" "51" "100" "-50" "13"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:link4" "wlan0" "76" "100" "-75" "13"
;;
+comfast,cf-e380ac-v2|\
tplink,tl-wr902ac-v1)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
ucidef_set_led_netdev "internet" "Internet" "green:internet" "eth0"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 64869701c6..911517cf37 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -27,6 +27,7 @@ ath79_setup_interfaces()
avm,fritzdvbc|\
comfast,cf-wr752ac-v1|\
comfast,cf-e130n-v2|\
+ comfast,cf-e380ac-v2|\
devolo,dvl1200i|\
devolo,dvl1750c|\
devolo,dvl1750i|\
@@ -748,6 +749,7 @@ ath79_setup_macs()
wan_mac=$(mtd_get_mac_text board_data 0x480)
label_mac=$wan_mac
;;
+ comfast,cf-e380ac-v2|\
netgear,wndr3700|\
netgear,wndr3700-v2|\
netgear,wndr3800|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index f0a3755de9..dd627ad2d6 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -13,6 +13,7 @@ case "$FIRMWARE" in
allnet,all-wap02860ac|\
araknis,an-500-ap-i-ac|\
araknis,an-700-ap-i-ac|\
+ comfast,cf-e380ac-v2|\
engenius,enstationac-v1|\
glinet,gl-x750|\
watchguard,ap300)
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 6a2131f5ae..b32a09f34b 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -740,6 +740,17 @@ define Device/comfast_cf-e375ac
endef
TARGET_DEVICES += comfast_cf-e375ac
+define Device/comfast_cf-e380ac-v2
+ SOC := qca9558
+ DEVICE_VENDOR := COMFAST
+ DEVICE_MODEL := CF-E380AC
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 \
+ kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += comfast_cf-e380ac-v2
+
define Device/comfast_cf-e5
SOC := qca9531
DEVICE_VENDOR := COMFAST
More information about the lede-commits
mailing list