[openwrt/openwrt] ramips: add support for Netgear EAX12 series
LEDE Commits
lede-commits at lists.infradead.org
Sat Jul 1 05:43:58 PDT 2023
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/32ea8a9a7e4b1319607ae398e9bf7d8e3c4cd756
commit 32ea8a9a7e4b1319607ae398e9bf7d8e3c4cd756
Author: Wenli Looi <wlooi at ucalgary.ca>
AuthorDate: Thu Mar 30 22:28:23 2023 +0000
ramips: add support for Netgear EAX12 series
Netgear EAX12, EAX11v2, EAX15v2 are wall-plug 802.11ax (Wi-Fi 6)
extenders that share the SoC, WiFi chip, and image format with the
WAX202.
Specifications:
* MT7621, 256 MiB RAM, 128 MiB NAND
* MT7915: 2.4/5 GHz 2x2 802.11ax (DBDC)
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)
All LEDs and buttons appear to work without state_default.
Installation:
* Flash the factory image through the stock web interface, or TFTP to
the bootloader. NMRP can be used to TFTP without opening the case.
Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.
References in GPL source:
https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz
* target/linux/ramips/dts/mt7621-rfb-ax-nand.dts
DTS file for this device.
Signed-off-by: Wenli Looi <wlooi at ucalgary.ca>
---
package/boot/uboot-envtools/files/ramips | 1 +
target/linux/ramips/dts/mt7621_netgear_eax12.dts | 189 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 26 +++
.../ramips/mt7621/base-files/etc/board.d/01_leds | 4 +
.../mt7621/base-files/etc/board.d/02_network | 5 +
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 5 +
.../mt7621/base-files/lib/upgrade/platform.sh | 1 +
7 files changed, 231 insertions(+)
diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 85a819be31..d4154cda49 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -65,6 +65,7 @@ h3c,tx1801-plus|\
h3c,tx1806|\
jcg,q20|\
linksys,e7350|\
+netgear,eax12|\
netgear,wax202|\
zyxel,wsm20)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
diff --git a/target/linux/ramips/dts/mt7621_netgear_eax12.dts b/target/linux/ramips/dts/mt7621_netgear_eax12.dts
new file mode 100644
index 0000000000..d5ad404be0
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_netgear_eax12.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "netgear,eax12", "mediatek,mt7621-soc";
+ model = "Netgear EAX12";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ client_green {
+ label = "green:client";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ client_red {
+ label = "red:client";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ router_green {
+ label = "green:router";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ router_red {
+ label = "red:router";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ eth_green {
+ label = "green:eth";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ eth_yellow {
+ label = "yellow:eth";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "Bootloader";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition at 80000 {
+ label = "Config";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ factory: partition at 100000 {
+ label = "Factory";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition at 180000 {
+ label = "firmware";
+ reg = <0x180000 0x3800000>;
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition at 400000 {
+ label = "ubi";
+ reg = <0x400000 0x3400000>;
+ };
+ };
+
+ partition at 2780000 {
+ label = "firmware_backup";
+ reg = <0x3980000 0x3800000>;
+ read-only;
+ };
+
+ partition at 4d80000 {
+ label = "CFG";
+ reg = <0x7180000 0x200000>;
+ read-only;
+ };
+
+ partition at 5580000 {
+ label = "RAE";
+ reg = <0x7380000 0x600000>;
+ read-only;
+ };
+
+ partition at 5980000 {
+ label = "POT";
+ reg = <0x7980000 0x020000>;
+ read-only;
+ };
+
+ partition at 6780000 {
+ label = "LOG";
+ reg = <0x79A0000 0x40000>;
+ read-only;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie1 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ };
+};
+
+&switch0 {
+ ports {
+ port at 0 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+&xhci {
+ status = "disabled";
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index a5b69839a7..ef02807ec1 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1598,6 +1598,32 @@ define Device/mts_wg430223
endef
TARGET_DEVICES += mts_wg430223
+define Device/netgear_eax12
+ $(Device/nand)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := EAX12
+ DEVICE_ALT0_VENDOR := NETGEAR
+ DEVICE_ALT0_MODEL := EAX11
+ DEVICE_ALT0_VARIANT := v2
+ DEVICE_ALT1_VENDOR := NETGEAR
+ DEVICE_ALT1_MODEL := EAX15
+ DEVICE_ALT1_VARIANT := v2
+ DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
+ NETGEAR_ENC_MODEL := EAX12
+ NETGEAR_ENC_REGION := US
+ NETGEAR_ENC_HW_ID_LIST := 1010000004540000_NETGEAR
+ NETGEAR_ENC_MODEL_LIST := EAX12;EAX11v2;EAX15v2
+ IMAGE_SIZE := 57344k
+ KERNEL_LOADADDR := 0x82000000
+ KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
+ append-squashfs4-fakeroot
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
+ append-ubi | check-size | netgear-encrypted-factory
+endef
+TARGET_DEVICES += netgear_eax12
+
define Device/netgear_ex6150
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 9b15da0d22..188605a671 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -138,6 +138,10 @@ mikrotik,routerboard-m11g)
mtc,wr1201)
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "br-lan"
;;
+netgear,eax12)
+ ucidef_set_led_netdev "eth_act" "LAN act" "yellow:eth" "lan" "tx rx"
+ ucidef_set_led_netdev "eth_link" "LAN link" "green:eth" "lan" "link"
+ ;;
netgear,r6220|\
netgear,r6260|\
netgear,r6350|\
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index cd746e84ee..180713d964 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -20,6 +20,7 @@ ramips_setup_interfaces()
linksys,re7000|\
mikrotik,ltap-2hnd|\
mikrotik,routerboard-m11g|\
+ netgear,eax12|\
netgear,ex6150|\
sercomm,na502|\
sercomm,na502s|\
@@ -275,6 +276,10 @@ ramips_setup_macs()
label_mac=$wan_mac
lan_mac=$(macaddr_add "$wan_mac" 2)
;;
+ netgear,eax12)
+ lan_mac=$(mtd_get_mac_ascii Config mac)
+ label_mac=$lan_mac
+ ;;
netgear,wax202)
lan_mac=$(mtd_get_mac_ascii Config mac)
wan_mac=$(macaddr_add "$lan_mac" 1)
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 80c7273543..b36ac028b0 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -118,6 +118,11 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
;;
+ netgear,eax12)
+ hw_mac_addr=$(mtd_get_mac_ascii Config mac)
+ [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
+ ;;
netgear,wax202)
hw_mac_addr=$(mtd_get_mac_ascii Config mac)
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index cef58ec3ba..fa4b8fcc82 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -87,6 +87,7 @@ platform_do_upgrade() {
linksys,ea8100-v1|\
linksys,ea8100-v2|\
mts,wg430223|\
+ netgear,eax12|\
netgear,r6220|\
netgear,r6260|\
netgear,r6350|\
More information about the lede-commits
mailing list