[openwrt/openwrt] mediatek: add support for Netgear EX6250v2 series
LEDE Commits
lede-commits at lists.infradead.org
Sat Jul 1 05:43:59 PDT 2023
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/73de41898fcd06d837b013449c370c493bcdc595
commit 73de41898fcd06d837b013449c370c493bcdc595
Author: Wenli Looi <wlooi at ucalgary.ca>
AuthorDate: Thu Mar 30 19:46:19 2023 +0000
mediatek: add support for Netgear EX6250v2 series
Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac
(Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work
currently as there is no driver.
Related: https://github.com/openwrt/openwrt/pull/5084
For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2.
Specifications:
* MT7629, 256 MiB RAM, 16 MiB SPI NOR
* MT7761N (2.4GHz) / MT7762N (5GHz) - no driver
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)
Installation:
* Flash the factory image through the stock web interface, or TFTP to
the bootloader. NMRP can be used to TFTP without opening the case.
* After installation, perform a factory reset. Wait for the device to
boot, then hold the reset button for 10 seconds. This is needed
because sysupgrade in the stock firmware will attempt to preserve its
configuration using sysupgrade.tgz.
See https://github.com/openwrt/openwrt/pull/4182
Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.
Signed-off-by: Wenli Looi <wlooi at ucalgary.ca>
---
package/boot/uboot-envtools/files/mediatek_mt7629 | 3 +-
.../mediatek/dts/mt7629-netgear-ex6250-v2.dts | 238 +++++++++++++++++++++
target/linux/mediatek/image/mt7629.mk | 26 +++
.../mediatek/mt7629/base-files/etc/board.d/01_leds | 4 +
.../mt7629/base-files/etc/board.d/02_network | 11 +
5 files changed, 281 insertions(+), 1 deletion(-)
diff --git a/package/boot/uboot-envtools/files/mediatek_mt7629 b/package/boot/uboot-envtools/files/mediatek_mt7629
index a5aa2b58a6..313fb6a448 100644
--- a/package/boot/uboot-envtools/files/mediatek_mt7629
+++ b/package/boot/uboot-envtools/files/mediatek_mt7629
@@ -12,7 +12,8 @@ touch /etc/config/ubootenv
board=$(board_name)
case "$board" in
-iptime,a6004mx)
+iptime,a6004mx|\
+netgear,ex6250-v2)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000"
;;
esac
diff --git a/target/linux/mediatek/dts/mt7629-netgear-ex6250-v2.dts b/target/linux/mediatek/dts/mt7629-netgear-ex6250-v2.dts
new file mode 100644
index 0000000000..5645ad799e
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7629-netgear-ex6250-v2.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7629.dtsi"
+
+/ {
+ model = "Netgear EX6250 v2";
+ compatible = "netgear,ex6250-v2", "mediatek,mt7629";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-override = "console=ttyS0,115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&pio 58 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ ap_mode {
+ label = "ap_mode";
+ gpios = <&pio 54 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ extender_mode {
+ label = "extender_mode";
+ gpios = <&pio 53 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&pio 61 GPIO_ACTIVE_LOW>;
+ };
+
+ client_green {
+ label = "green:client";
+ gpios = <&pio 59 GPIO_ACTIVE_LOW>;
+ };
+
+ client_red {
+ label = "red:client";
+ gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+ };
+
+ router_green {
+ label = "green:router";
+ gpios = <&pio 55 GPIO_ACTIVE_LOW>;
+ };
+
+ router_red {
+ label = "red:router";
+ gpios = <&pio 56 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&pio 57 GPIO_ACTIVE_LOW>;
+ };
+
+ eth_green {
+ label = "green:eth";
+ gpios = <&pio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ eth_yellow {
+ label = "yellow:eth";
+ gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+ pinctrl-1 = <&ephy_leds_pins>;
+ status = "okay";
+
+ mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "Bootloader";
+ reg = <0x0 0x60000>;
+ read-only;
+ };
+
+ partition at 60000 {
+ label = "Config";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ partition at 70000 {
+ label = "Factory";
+ reg = <0x70000 0x10000>;
+ read-only;
+ };
+
+ partition at 80000 {
+ label = "firmware";
+ reg = <0x80000 0xcd0000>;
+ compatible = "denx,fit";
+ };
+
+ partition at d50000 {
+ label = "CFG";
+ reg = <0xd50000 0x80000>;
+ read-only;
+ };
+
+ partition at dd0000 {
+ label = "RAE";
+ reg = <0xdd0000 0x200000>;
+ read-only;
+ };
+
+ partition at fd0000 {
+ label = "POT";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition at fe0000 {
+ label = "LOG";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pio {
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio";
+ };
+ };
+
+ ephy_leds_pins: ephy-leds-pins {
+ mux {
+ function = "led";
+ groups = "ephy_leds";
+ };
+ };
+
+ qspi_pins: qspi-pins {
+ mux {
+ function = "flash";
+ groups = "spi_nor";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_txd_rxd" ;
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
+ status = "okay";
+};
diff --git a/target/linux/mediatek/image/mt7629.mk b/target/linux/mediatek/image/mt7629.mk
index 3f5b2e2579..33c557190f 100644
--- a/target/linux/mediatek/image/mt7629.mk
+++ b/target/linux/mediatek/image/mt7629.mk
@@ -22,3 +22,29 @@ define Device/iptime_a6004mx
IMAGE/recovery.bin := append-kernel | pad-to 128k | append-ubi | append-metadata
endef
TARGET_DEVICES += iptime_a6004mx
+
+define Device/netgear_ex6250-v2
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := EX6250
+ DEVICE_VARIANT := v2
+ DEVICE_ALT0_VENDOR := NETGEAR
+ DEVICE_ALT0_MODEL := EX6400
+ DEVICE_ALT0_VARIANT := v3
+ DEVICE_ALT1_VENDOR := NETGEAR
+ DEVICE_ALT1_MODEL := EX6410
+ DEVICE_ALT1_VARIANT := v2
+ DEVICE_ALT2_VENDOR := NETGEAR
+ DEVICE_ALT2_MODEL := EX6470
+ DEVICE_DTS := mt7629-netgear-ex6250-v2
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := uboot-envtools
+ NETGEAR_ENC_MODEL := EX6250v2
+ NETGEAR_ENC_REGION := US
+ NETGEAR_ENC_HW_ID_LIST := 1010000003630000_NETGEAR;1010000003540000_NETGEAR
+ NETGEAR_ENC_MODEL_LIST := EX6250v2;EX6400v3;EX6470;EX6410v2
+ IMAGE_SIZE := 13120k
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to 128k | append-rootfs | \
+ pad-rootfs | check-size | netgear-encrypted-factory
+endef
+TARGET_DEVICES += netgear_ex6250-v2
diff --git a/target/linux/mediatek/mt7629/base-files/etc/board.d/01_leds b/target/linux/mediatek/mt7629/base-files/etc/board.d/01_leds
index 42b6fcbbb3..c42ab4713b 100644
--- a/target/linux/mediatek/mt7629/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/mt7629/base-files/etc/board.d/01_leds
@@ -9,6 +9,10 @@ case $board in
iptime,a6004mx)
ucidef_set_led_netdev "wan" "WAN" "orange:wan" "eth1"
;;
+netgear,ex6250-v2)
+ ucidef_set_led_netdev "eth_act" "LAN act" "yellow:eth" "eth0" "tx rx"
+ ucidef_set_led_netdev "eth_link" "LAN link" "green:eth" "eth0" "link"
+ ;;
esac
board_config_flush
diff --git a/target/linux/mediatek/mt7629/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7629/base-files/etc/board.d/02_network
index 4254f39ca0..db931c8334 100644
--- a/target/linux/mediatek/mt7629/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/mt7629/base-files/etc/board.d/02_network
@@ -16,6 +16,9 @@ mediatek_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "6 at eth0"
;;
+ netgear,ex6250-v2)
+ ucidef_set_interface_lan "eth0"
+ ;;
esac
}
@@ -24,7 +27,15 @@ mediatek_setup_macs()
local board="$1"
case $board in
+ netgear,ex6250-v2)
+ lan_mac=$(mtd_get_mac_ascii Config mac)
+ label_mac=$lan_mac
+ ;;
esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
}
board_config_update
More information about the lede-commits
mailing list