[openwrt/openwrt] ipq40xx: add support for MikroTik SXTsq 5 ac
LEDE Commits
lede-commits at lists.infradead.org
Mon May 3 14:02:38 BST 2021
zorun pushed a commit to openwrt/openwrt.git, branch openwrt-21.02:
https://git.openwrt.org/701d25b551144cacd5d7fd8024fd2e6c7c264b70
commit 701d25b551144cacd5d7fd8024fd2e6c7c264b70
Author: Roger Pueyo Centelles <roger.pueyo at guifi.net>
AuthorDate: Fri Oct 23 16:05:28 2020 +0200
ipq40xx: add support for MikroTik SXTsq 5 ac
This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD),
an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet
port.
Specifications:
- SoC: Qualcomm Atheros IPQ4018
- RAM: 256 MB
- Storage: 16 MB NOR
- Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae
- Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in
- 1x Ethernet LED (green)
- 7x user-controllable LEDs
· 1x power (blue)
· 1x user (green)
· 5x rssi (green)
Note:
Serial UART is probably available on the board, but it has not been
tested.
Flashing:
Boot via TFTP the initramfs image. Then, upload a sysupgrade image
via SSH and flash it normally. More info at the "Common procedures
for MikroTik products" page https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo at guifi.net>
(cherry picked from commit d1f1e5269ed992e6fc30d575b43b0913c9e58ca2)
[Compile and Run Tested]
Signed-off-by: Nick Hainke <vincent at systemli.org>
---
package/firmware/ipq-wifi/Makefile | 2 +
.../ipq-wifi/board-mikrotik_sxtsq-5-ac.qca4019 | Bin 0 -> 12176 bytes
.../linux/ipq40xx/base-files/etc/board.d/01_leds | 8 +
.../ipq40xx/base-files/etc/board.d/02_network | 5 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 3 +-
.../ipq40xx/base-files/lib/upgrade/platform.sh | 3 +-
.../arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts | 242 +++++++++++++++++++++
target/linux/ipq40xx/image/mikrotik.mk | 8 +
.../patches-5.4/901-arm-boot-add-dts-files.patch | 3 +-
9 files changed, 271 insertions(+), 3 deletions(-)
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 770360443a..e3b25bb556 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -44,6 +44,7 @@ ALLWIFIBOARDS:= \
linksys_mr8300-v0 \
luma_wrtq-329acn \
mikrotik_hap-ac2 \
+ mikrotik_sxtsq-5-ac \
mobipromo_cm520-79f \
nec_wg2600hp3 \
plasmacloud_pa1200 \
@@ -128,6 +129,7 @@ $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
+$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
diff --git a/package/firmware/ipq-wifi/board-mikrotik_sxtsq-5-ac.qca4019 b/package/firmware/ipq-wifi/board-mikrotik_sxtsq-5-ac.qca4019
new file mode 100644
index 0000000000..97f982637a
Binary files /dev/null and b/package/firmware/ipq-wifi/board-mikrotik_sxtsq-5-ac.qca4019 differ
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
index 3e0f3ab258..ac11655904 100755
--- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -46,6 +46,14 @@ engenius,ens620ext)
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
;;
+mikrotik,sxtsq-5-ac)
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
+ ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
+ ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
+ ;;
mobipromo,cm520-79f)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 515fa115d9..1d4c78833a 100755
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -29,6 +29,7 @@ ipq40xx_setup_interfaces()
engenius,eap1300|\
engenius,emd1|\
meraki,mr33|\
+ mikrotik,sxtsq-5-ac|\
netgear,ex6100v2|\
netgear,ex6150v2|\
zyxel,wre6606)
@@ -176,6 +177,10 @@ ipq40xx_setup_macs()
lan_mac=$(macaddr_add $wan_mac 1)
label_mac="$wan_mac"
;;
+ mikrotik,sxtsq-5-ac)
+ lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+ label_mac="$lan_mac"
+ ;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 0e027dd0a5..b12c9af9a7 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -249,7 +249,8 @@ case "$FIRMWARE" in
caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
;;
- mikrotik,hap-ac2)
+ mikrotik,hap-ac2|\
+ mikrotik,sxtsq-5-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
index c94b4d8f9e..54683977cd 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -111,7 +111,8 @@ platform_do_upgrade() {
CI_KERNPART="part.safe"
nand_do_upgrade "$1"
;;
- mikrotik,hap-ac2)
+ mikrotik,hap-ac2|\
+ mikrotik,sxtsq-5-ac)
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
default_do_upgrade "$1"
;;
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
new file mode 100644
index 0000000000..fd11229dbb
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2020, Robert Marko <robimarko at gmail.com> */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "MikroTik SXTsq 5 ac (RBSXTsqG-5acD)";
+ compatible = "mikrotik,sxtsq-5-ac";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ soc {
+ rng at 22000 {
+ status = "okay";
+ };
+
+ mdio at 90000 {
+ status = "okay";
+ };
+
+ counter at 4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ tcsr at 1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr at 1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr at 1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto at 8e3a000 {
+ status = "okay";
+ };
+
+ watchdog at b017000 {
+ status = "okay";
+ };
+
+ ess-psgmii at 98000 {
+ status = "okay";
+ };
+
+ edma at c080000 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,num_gmac = <1>;
+ qcom,single-phy;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "blue:power";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ panic-indicator;
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssilow {
+ label = "green:rssilow";
+ gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssimediumlow {
+ label = "green:rssimediumlow";
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssimedium {
+ label = "green:rssimedium";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssimediumhigh {
+ label = "green:rssimediumhigh";
+ gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ flash at 0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "Qualcomm";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition at 80000 {
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ label = "RouterBoot";
+ reg = <0x80000 0x80000>;
+ read-only;
+
+ hard_config {
+ read-only;
+ };
+
+ dtb_config {
+ read-only;
+ };
+
+ soft_config {
+ };
+ };
+
+ partition at 100000 {
+ compatible = "mikrotik,minor";
+ label = "firmware";
+ reg = <0x100000 0xf00000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&wifi1 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "MikroTik-SXTsq-5-ac";
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <1 0x20>;
+};
+
+&mdio {
+ status = "okay";
+};
diff --git a/target/linux/ipq40xx/image/mikrotik.mk b/target/linux/ipq40xx/image/mikrotik.mk
index 9509ef8577..7c2fa52738 100644
--- a/target/linux/ipq40xx/image/mikrotik.mk
+++ b/target/linux/ipq40xx/image/mikrotik.mk
@@ -18,3 +18,11 @@ define Device/mikrotik_hap-ac2
kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += mikrotik_hap-ac2
+
+define Device/mikrotik_sxtsq-5-ac
+ $(call Device/mikrotik_nor)
+ DEVICE_MODEL := SXTsq 5 ac (RBSXTsqG-5acD)
+ SOC := qcom-ipq4018
+ DEVICE_PACKAGES := ipq-wifi-mikrotik_sxtsq-5-ac rssileds
+endef
+TARGET_DEVICES += mikrotik_sxtsq-5-ac
diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
index 6a421b9007..6b7c68bf63 100644
--- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john at phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,59 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -837,11 +837,60 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -32,6 +32,7 @@ Signed-off-by: John Crispin <john at phrozen.org>
+ qcom-ipq4018-jalapeno.dtb \
+ qcom-ipq4018-meshpoint-one.dtb \
+ qcom-ipq4018-hap-ac2.dtb \
++ qcom-ipq4018-sxtsq-5-ac.dtb \
+ qcom-ipq4018-nbg6617.dtb \
+ qcom-ipq4019-oap100.dtb \
+ qcom-ipq4018-pa1200.dtb \
More information about the lede-commits
mailing list