[openwrt/openwrt] ipq40xx: add MikroTik hAP ac2 support
LEDE Commits
lede-commits at lists.infradead.org
Mon May 3 14:02:37 BST 2021
zorun pushed a commit to openwrt/openwrt.git, branch openwrt-21.02:
https://git.openwrt.org/3ce7f1e477c97099fdc905ae7c921e1790d52d0c
commit 3ce7f1e477c97099fdc905ae7c921e1790d52d0c
Author: Robert Marko <robimarko at gmail.com>
AuthorDate: Thu Nov 12 19:45:22 2020 +0100
ipq40xx: add MikroTik hAP ac2 support
This adds support for the MikroTik RouterBOARD RBD52G-5HacD2HnD-TC
(hAP ac²), a indoor dual band, dual-radio 802.11ac
wireless AP with integrated omnidirectional antennae, USB port and five
10/100/1000 Mbps Ethernet ports.
See https://mikrotik.com/product/hap_ac2 for more info.
Specifications:
- SoC: Qualcomm Atheros IPQ4018
- RAM: 128 MB
- Storage: 16 MB NOR
- Wireless:
· Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae
· Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae
- Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 5x 1000/100/10 port,
passive PoE in
- 1x USB Type A port
Installation:
Boot the initramfs image via TFTP and then flash the sysupgrade
image using "sysupgrade -n"
Signed-off-by: Robert Marko <robimarko at gmail.com>
(cherry picked from commit faea7becafc634dc882f0ad8f9388862ccd5bd0d)
[Compile Tested]
Signed-off-by: Nick Hainke <vincent at systemli.org>
---
package/firmware/ipq-wifi/Makefile | 2 +
.../ipq-wifi/board-mikrotik_hap-ac2.qca4019 | Bin 0 -> 24324 bytes
.../ipq40xx/base-files/etc/board.d/02_network | 6 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 10 +
.../ipq40xx/base-files/lib/upgrade/platform.sh | 4 +
.../arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts | 272 +++++++++++++++++++++
target/linux/ipq40xx/image/mikrotik.mk | 20 ++
.../patches-5.4/901-arm-boot-add-dts-files.patch | 3 +-
8 files changed, 316 insertions(+), 1 deletion(-)
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index e5f10a1f98..770360443a 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -43,6 +43,7 @@ ALLWIFIBOARDS:= \
linksys_ea8300 \
linksys_mr8300-v0 \
luma_wrtq-329acn \
+ mikrotik_hap-ac2 \
mobipromo_cm520-79f \
nec_wg2600hp3 \
plasmacloud_pa1200 \
@@ -126,6 +127,7 @@ $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
diff --git a/package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019 b/package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019
new file mode 100644
index 0000000000..73372c183e
Binary files /dev/null and b/package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019 differ
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index fe21dc8035..515fa115d9 100755
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -48,6 +48,7 @@ ipq40xx_setup_interfaces()
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
asus,rt-ac58u|\
+ mikrotik,hap-ac2|\
zyxel,nbg6617)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
@@ -170,6 +171,11 @@ ipq40xx_setup_macs()
wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
+ mikrotik,hap-ac2)
+ wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+ lan_mac=$(macaddr_add $wan_mac 1)
+ label_mac="$wan_mac"
+ ;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c4d9dd78e3..0e027dd0a5 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -140,6 +140,11 @@ case "$FIRMWARE" in
caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
;;
+ mikrotik,hap-ac2)
+ wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+ ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
+ ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
+ ;;
netgear,ex6100v2 |\
netgear,ex6150v2)
caldata_extract "ART" 0x1000 0x2f20
@@ -244,6 +249,11 @@ case "$FIRMWARE" in
caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
;;
+ mikrotik,hap-ac2)
+ wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+ ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
+ ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
+ ;;
netgear,ex6100v2 |\
netgear,ex6150v2)
caldata_extract "ART" 0x5000 0x2f20
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
index 5582696759..c94b4d8f9e 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -111,6 +111,10 @@ platform_do_upgrade() {
CI_KERNPART="part.safe"
nand_do_upgrade "$1"
;;
+ mikrotik,hap-ac2)
+ [ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
+ default_do_upgrade "$1"
+ ;;
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200 |\
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
new file mode 100644
index 0000000000..e1e6326ae9
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2020, Robert Marko <robimarko at gmail.com> */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "MikroTik hAP ac2";
+ compatible = "mikrotik,hap-ac2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x08000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ soc {
+ rng at 22000 {
+ status = "okay";
+ };
+
+ counter at 4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ tcsr at 1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr at 194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ ess_tcsr at 1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr at 1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb3 at 8af8800 {
+ status = "okay";
+
+ dwc3 at 8a00000 {
+ phys = <&usb3_hs_phy>;
+ phy-names = "usb2-phy";
+ };
+ };
+
+ crypto at 8e3a000 {
+ status = "okay";
+ };
+
+ watchdog at b017000 {
+ status = "okay";
+ };
+
+ ess-switch at c000000 {
+ status = "okay";
+ };
+
+ edma at c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "green:power";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ panic-indicator;
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ enable-usb-power {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "enable USB power";
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ flash at 0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "Qualcomm";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition at 80000 {
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ label = "RouterBoot";
+ reg = <0x80000 0x80000>;
+ read-only;
+
+ hard_config {
+ read-only;
+ };
+
+ dtb_config {
+ read-only;
+ };
+
+ soft_config {
+ };
+ };
+
+ partition at 100000 {
+ compatible = "mikrotik,minor";
+ label = "firmware";
+ reg = <0x100000 0xf00000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+};
+
+ðphy0 {
+ qcom,single-led-1000;
+ qcom,single-led-100;
+ qcom,single-led-10;
+};
+
+ðphy1 {
+ qcom,single-led-1000;
+ qcom,single-led-100;
+ qcom,single-led-10;
+};
+
+ðphy2 {
+ qcom,single-led-1000;
+ qcom,single-led-100;
+ qcom,single-led-10;
+};
+
+ðphy3 {
+ qcom,single-led-1000;
+ qcom,single-led-100;
+ qcom,single-led-10;
+};
+
+ðphy4 {
+ qcom,single-led-1000;
+ qcom,single-led-100;
+ qcom,single-led-10;
+};
+
+&wifi0 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
+};
+
+&wifi1 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
+};
diff --git a/target/linux/ipq40xx/image/mikrotik.mk b/target/linux/ipq40xx/image/mikrotik.mk
index e69de29bb2..9509ef8577 100644
--- a/target/linux/ipq40xx/image/mikrotik.mk
+++ b/target/linux/ipq40xx/image/mikrotik.mk
@@ -0,0 +1,20 @@
+define Device/mikrotik_nor
+ DEVICE_VENDOR := MikroTik
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := 16128k
+ KERNEL_NAME := vmlinux
+ KERNEL := kernel-bin | append-dtb-elf
+ IMAGES = sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | \
+ pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+ append-metadata | check-size
+endef
+
+define Device/mikrotik_hap-ac2
+ $(call Device/mikrotik_nor)
+ DEVICE_MODEL := hAP ac2
+ SOC := qcom-ipq4018
+ DEVICE_PACKAGES := ipq-wifi-mikrotik_hap-ac2 -kmod-ath10k-ct \
+ kmod-ath10k-ct-smallbuffers
+endef
+TARGET_DEVICES += mikrotik_hap-ac2
diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
index a3d3341587..6a421b9007 100644
--- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john at phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,58 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -837,11 +837,59 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -31,6 +31,7 @@ Signed-off-by: John Crispin <john at phrozen.org>
+ qcom-ipq4018-gl-ap1300.dtb \
+ qcom-ipq4018-jalapeno.dtb \
+ qcom-ipq4018-meshpoint-one.dtb \
++ qcom-ipq4018-hap-ac2.dtb \
+ qcom-ipq4018-nbg6617.dtb \
+ qcom-ipq4019-oap100.dtb \
+ qcom-ipq4018-pa1200.dtb \
More information about the lede-commits
mailing list